露天矿非工作帮移动监测及滑坡规律性讨论

根 据 某露 天 煤 矿 非工 作 帮 移 动监 测 的 多 年资 料 ,总 结 出 露 天矿 非 工 作 帮的 监 测 方 法,并 初 步探 讨 了 露 天 矿非 工作 帮 移动 滑坡 的 规律 性。     

Monitoring and modelling of pore water pressure changes and riverbank stability during flow events

Pore water pressures (positive and negative) were monitored for four years (1996–1999) using a series of tensiometer‐piezometers at increasing depths in a riverbank of the Sieve River, Tuscany (central Italy), with the overall objective of investigating pore pressure changes in response to ?ow events and their effects on bank stability. The saturated/unsaturated ?ow was modelled using a ?nite element seepage analysis, for the main ?ow events occurring during the four‐year monitoring period. Modelling results were validated by comparing measured with computed pore water pressure values for a series of representative events. Riverbank stability analysis was conducted by applying the limit equilibrium method (Morgenstern‐Price), using pore water pressure distributions obtained by the seepage analysis. The simulation of the 14 December 1996 event, during which a bank failure occurred, is reported in detail to illustrate the relations between the water table and river stage during the various phases of the hydrograph and their effects on bank stability. The simulation, according to monitored data, shows that the failure occurred three hours after the peak stage, during the inversion of ?ow (from the bank towards the river). A relatively limited development of positive pore pressures, reducing the effective stress and annulling the shear strength term due to the matric suction, and the sudden loss of the con?ning pressure of the river during the initial drawdown were responsible for triggering the mass failure. Results deriving from the seepage and stability analysis of nine selected ?ow events were then used to investigate the role of the ?ow event characteristics (in terms of peak stages and hydrograph characteristics) and of changes in bank geometry. Besides the peak river stage, which mainly controls the occurrence of conditions of instability, an important role is played by the hydrograph characteristics, in particular by the presence of one or more minor peaks in the river stage preceding the main one. Copyright © 2004 John Wiley & Sons, Ltd.     

Analysis of crack movements observed in an alpine bedrock cliff

Crack widths and rock temperatures were monitored on an andestic bedrock cliff in the summit area of the Daisetsu Mountains, Hokkaido, northern Japan. Sequential data recorded the gradual widening of a crack to the point of critical crack extension, which resulted in catastrophic rock breakage. The data indicate that a combination of liquid water in?ltration into crack tip and subsequent freezing is the most signi?cant factor contributing to critical crack extension. The recorded sub‐critical crack movements involved a number of minor crack extensions and contractions, the timing of which correlates well with the magnitude of the reconstructed thermal stresses at the crack tip derived from thermal deformation of the plate‐shaped rock fragment. Larger crack extensions occurred when stress at the crack tip exceeded a threshold value, possibly re?ecting the control of rock fracture mechanics by which cracks are thought to propagate when the stress intensity factor at the crack tip exceeds the threshold values for stress corrosion cracking and the fracture toughness of the material. Copyright © 2004 John Wiley & Sons, Ltd.     

Large aftershocks triggering by Coulomb failure stress following the 2001 M_S=8.1 great Kunlun earthquake

IntroductionItisshowedbyresearchesonearthquakestresstriggeringrecentlythatsmall'static'stresschangesduetopermanentfaultdisplacementcanalterthelikelihoodof,ortrigger,earthquakesonnearbyfaults(Harris,1998).Manystudiesoftriggeringinthenear-field,particularlyofaftershocks,showthesestaticchangesaretriggeringagent(Kilb,etal,2000).ReasenbergandSimpson(1992)studiedthere-sponseofregionalseismicitytothestaticstresschangeproducedbyLomaPrietaearthquake,andtheresultsshowedthataftershockratesincreasedinre…     

Strain field measurements of rubber by image analysis and design criteria for laminated rubber bearings (LRB)

Although seismic isolation rubber bearings in bridges and buildings have proven to be a very effective passive method for reducing earthquake‐induced forces, a detailed mechanical modeling of the rubber that is used in bearings under large strains has not been established. Therefore, a 3D model of failure behavior and the design criteria for the safety evaluation of seismic isolation bearings have not yet been developed. This paper presents: (1) correlation‐based template‐matching algorithms to measure large strain fields of continua; (2) a failure criterion for rubber; and (3) the design criteria for the safety evaluation of laminated algorithms, data‐validation algorithms were developed and implemented to eliminate possible unrealistic displacement vectors present in the measured displacement field. The algorithms were successfully employed in the strain field measurement of LRB and rubber materials that are subjected to failure. The measured local strains for rubber material at failure were used to develop a failure criterion for rubber. The validity of the proposed criterion was evaluated by applying it to the LRB; the criterion was introduced into a 3D finite element model of LRB, compared with the experimental results of bearings failure, and verified. Finally, design criteria are proposed for LRB for the safety evaluation. Copyright © 2003 John Wiley & Sons, Ltd.     

化学腐蚀下砂岩三轴细观损伤机理及损伤变量分析

利用CT识别技术对化学腐蚀下的砂岩进行了三轴加载全过程的即时扫描试验，得到了在不同级荷载作用下砂岩的压密、微裂纹萌生、扩展和破裂的CT图像和CT数，分析了砂岩损伤演化的细观机理。同时，建立了一个基于化学腐蚀影响和CT数的损伤变量模型。     

地铁隧道开挖引起地表塌陷分析

深圳富水软弱地层地铁隧道开挖中出现的工作面失稳及由此引起的地表塌陷是地铁安全施工中极其重要的方面，对施工安全、进度都有较大影响，同时也对整个工程造成巨大的经济损失。通过对深圳地铁Ⅰ期工程土建施工中全线部分暗挖标段出现的工作面失稳、地表塌陷工程实践和现场监测结果分析，特别着重对连续2次出现地表塌陷的3A标暗挖隧道研究，从隧道上覆地层物理力学性质参数、地层变形监测分析及施工工艺原因3方面阐述了地表塌陷的原因。明确提出剪切破坏线和失水空洞区的概念，确定出引发地表塌陷的主导因素为施工工艺原因。建议针对该类地层条件，应做好超前地质预报．适当调整预加固参数．加强隧道结构和地表的动态变形监测，施工技术人员做到准确了解施工现场动态，及时调整施工工艺参数，以保证隧道的安全施工。分析结果对深圳地铁Ⅱ期工程施工及类似地层条件地下工程施工提供科学预测、预防地表塌陷的方法和技术措施，达到地铁隧道施工中经济效益与安全施工的统一。     

某浅埋地下洞室围岩稳定及渐进破坏过程分析

以新疆乌鲁木齐市"世纪花苑"三期工程废弃人防地道为实例,在查明研究区浅埋洞室分布特征的基础上,结合现场及室内试验获取相关岩土体物理力学参数,利用快速拉格朗日差分分析程序FLAC研究浅埋洞室在拟建高层荷载作用下的稳定性及其破坏过程,通过系列模拟图,较真实地再现了洞室围岩变形破坏、尤其是塑性区发展变化过程。     

基于MAPGIS的钻孔柱状图绘制软件的编制

绘制钻孔地质柱状图是地质工作中的一项重要工作。在计算机没有普及时，主要是通过手工绘制完成的。随着计算机在地质学中的广泛应用，地质工作者就如何利用计算机高效快速地绘制钻孔地质柱状图进行了很多尝试，如使用一些商业绘图软件或编制了一些软件，但往往不尽人意。基于MAPGIS开发一个钻孔柱状图绘制软件，可以方便地读取数据库中的数据进行柱状图绘制，生成图形为MAPGIS文件格式，可以在MAPIS中修改及打印。这里介绍了MAPGIS二次开发平台，并阐述了软件系统设计思路和关键技术的实现方法。     

双剪统一强度准则改进及其在岩土工程中的应用

在分析Mohr-Coulomb强度准则和双剪统一强度准则的基础上,提出了主剪面应力对和主剪面应力对的作用这2个新概念,并以此为出发点,通过考虑十二面体单元主剪面上所有3个主剪面应力对的共同作用,在双剪强度准则的基础上提出了一个新准则,并对其作了极限线分析.应用该新强度准则研究了静水压力条件下圆形巷道围岩弹塑性分析和土压力计算问题.研究表明,该准则不仅能较好地非线性反映岩土的3个基本强度特征,还解决了双剪统一准则中存在的双重破坏角问题.