山区公路软基病害研究

随着高等级公路建设规模的扩大，山区公路所面临的路基病害特别是软土路基病害问题也逐渐增多。结合对陕南勉(县)一宁(强)高速公路工程实例分析，对山区软土成因及其特性进行了初步分析，认为山区软土属以坡洪积、湖积和冲积为主的软土，也有少量是由坡残积物堆积而形成。山区软土的特殊性表现在成分的复杂性、分布的不均匀性、隐蔽性和物理力学性质的特殊性。根据其特性以及中国山区公路软基普遍存在的病害问题，总结了山区公路软基的主要病害类型为剪切拉裂破坏、浸水沉陷破坏、剥蚀坍塌破坏、推挤滑动破坏。还提出了相应的软基处理方法及建议。     

地下洞库勘察中的深斜孔钻探和压水试验技术

青岛市黄岛区拟建设海底地下油气储藏库,前期地质勘察工作要求施工倾角45°、深220m的取心钻孔4个,并在孔内分段进行压水试验.本文介绍了如何利用XY-4型金刚石小口径钻机施工基岩深斜孔及压水试验技术.     

THE SIMULATED STORAGE CAPACITY OF FLOOD AND WATERLOGGING IN THE TYPICAL AGRICULTURAL REGION IN JIANGHAN PLAIN

１ＩＮＴＲＯＤＵＣＴＩＯＮＪｉａｎｇｈａｎＰｌａｉｎｉｓｏｎｅｏｆｔｈｅｉｍｐｏｒｔａｎｔｂａｓｅｓｏｆＣｈｉｎａ′ｓａｇｒｉｃｕｌｔｕｒａｌｐｒｏｄｕｃｔｉｖｉｔｙｌｏｃａｔｅｄｉｎｔｈｅｍｉｄｄｌｅＣｈａｎｇｊｉａｎｇＲｉｖｅｒｖａｌｌｅｙｏｆｃｅｎｔｒａｌＣｈｉｎａ．ＴｈｅＪｉａｎｇｈａｎｐｌａｉｎａｐｐｒｏｘｉｍａｔｅｌｙ６．６×１０４ｋｍ２ｉｎａｒｅａａｎｄｏｖｅｒ３０ｍｉｌｌｉｏｎｉｎｐｏｐｕｌａｔｉｏｎｉｓｔｈｅｒｅｎｏｗｎｅｄ“ｃｏｕｎｔｒｙｏｆｆｉｓｈａｎｄｒｉｃｅ＂ｉｎ…     

重力插值方法研究

为了根据离散观测数据构制连续空间重力变化图像，分析和讨论了３种数值插值方法，计算结果表明多面函数方法插值精度最高。由于逐步回归分析筛选核函数中心点的计算繁琐，文中提出根据分形理论和Ｓｈａｎｎｏｎ取样定理来确定核函数中心点。对滇西试验场进行模拟试算，插值精度可达到４～５（１０－８ｍｓ－２）。     

论现代航海技术与高等航海教育

针对航海技术的现状和发展趋势 ,提出了高等航海教育应向国际化、高素质化、现代化、技能化、规范化发展 ,以培养高素质的国际航运人才。     

Study on numerical simulation to water lowering in an open coal mine digging

In view of the situation of excavation of open coal mine for the underground water disaster,we should carry out simulation studies for the numerical value of the water lowering project and improve the accuracy and the level of the water lowering project.On the basis of the hydrological geological conditions of certain open mine digging,a more reasonable seepage numerical model was built according to MODFLOW.It was simulated in advance that the process of the confined water level descending with the time,and combining with the actual observations to test the correctness of the model.The calculation showed that the results coincided well with the results of actual measurement.Based on this,different water lowering numerical simulations were built for the open coal mine digging.It could be simulated and forecast that the changes of the groundwater level in drainage process within and outside the mine pit,and it was quantitatively assessed that the possible water lowering result of the opencast water drainage process,which provide an important basis for the actual water lowering project and the possible project disposal.     

用素土桩挤密法处理陇东湿陷性黄土地基

素土桩挤密地基由桩间挤密土和回填素土夯实的桩体组成，它是一种人工“复合地基”。其作用是通过素土桩挤密法提高地基土的密实度，从而对湿陷性黄土达到消除浅部或深部的部分或全部湿陷性的作用，并改善地基承载能力，减少地基变形。本文通过现场单桩、群桩单元体轻便触探、小环刀深层取样、开剖取样等方法对场地地基土挤密前、后干重度和压实系数进行了对比分析，判定用素土桩挤密法处理陇东湿陷性黄土地基的可行性。     

Upscaling of elastic properties for large scale geomechanical simulations

Large scale geomechanical simulations are being increasingly used to model the compaction of stress dependent reservoirs, predict the long term integrity of under‐ground radioactive waste disposals, and analyse the viability of hot‐dry rock geothermal sites. These large scale simulations require the definition of homogenous mechanical properties for each geomechanical cell whereas the rock properties are expected to vary at a smaller scale. Therefore, this paper proposes a new methodology that makes possible to define the equivalent mechanical properties of the geomechanical cells using the fine scale information given in the geological model. This methodology is implemented on a synthetic reservoir case and two upscaling procedures providing the effective elastic properties of the Hooke's law are tested. The first upscaling procedure is an analytical method for perfectly stratified rock mass, whereas the second procedure computes lower and upper bounds of the equivalent properties with no assumption on the small scale heterogeneity distribution. Both procedures are applied to one geomechanical cell extracted from the reservoir structure. The results show that the analytical and numerical upscaling procedures provide accurate estimations of the effective parameters. Furthermore, a large scale simulation using the homogenized properties of each geomechanical cell calculated with the analytical method demonstrates that the overall behaviour of the reservoir structure is well reproduced for two different loading cases. Copyright © 2004 John Wiley & Sons, Ltd.     

Numerical prediction of blast‐induced stress wave from large‐scale underground explosion

This paper presents a numerical model for predicting the dynamic response of rock mass subjected to large‐scale underground explosion. The model is calibrated against data obtained from large‐scale field tests. The Hugoniot equation of state for rock mass is adopted to calculate the pressure as a function of mass density. A piecewise linear Drucker–Prager strength criterion including the strain rate effect is employed to model the rock mass behaviour subjected to blast loading. A double scalar damage model accounting for both the compression and tension damage is introduced to simulate the damage zone around the charge chamber caused by blast loading. The model is incorporated into Autodyn3D through its user subroutines. The numerical model is then used to predict the dynamic response of rock mass, in terms of the peak particle velocity (PPV) and peak particle acceleration (PPA) attenuation laws, the damage zone, the particle velocity time histories and their frequency contents for large‐scale underground explosion tests. The computed results are found in good agreement with the field measured data; hence, the proposed model is proven to be adequate for simulating the dynamic response of rock mass subjected to large‐scale underground explosion. Extended numerical analyses indicate that, apart from the charge loading density, the stress wave intensity is also affected, but to a lesser extent, by the charge weight and the charge chamber geometry for large‐scale underground explosions. Copyright © 2004 John Wiley & Sons, Ltd.