气举反循环钻深度的理论计算与加深试验

运用气举反循环钻进、在满足一定条件下适当增加双壁钻具长度即可得到较大钻进孔深，本文通过理论计算及实验，证实了使用现有设备，气举气循环可以更好的满足超午米深水井的施工要求。     

煤矿采空区钻孔注浆治理工艺

钻孔注浆充填固结处理煤矿采空区塌陷是一种经济快捷的有效方法，本文就其施工工艺方法进行了简单分析，期望能为其它类似工程提供参考。     

华北地块东段和龙超镁铁质科马提岩的发现及特征

和龙岩体赋存于新太古代夹皮沟—金城洞花岗绿岩带中,与围岩发生同变形变质。岩体具有典型的科马提岩冷凝结构分层和鬣刺结构、冷凝多面体节理。上述特征是作者1990年发现确认的。该科马提岩的矿物学特征:玻璃质脱玻形成铁皂石等矿物;斜方辉石和橄榄石鬣刺呈中空骸晶状,大部被滑石、铁白云石、绿泥石、磁铁矿等取代,但仍保留完好的长柱状假像;堆积带中橄榄石呈微细粒、新鲜,仅发生网状蛇纹石化。岩石化学特征富MgO,CaO/Al_2O_3=1.04,用科马提岩分类图判别为超镁铁质科马提岩。     

滚刀钻头在桩基施工中的应用

焊齿破岩滚刀钻头适应多种地层钻进。本文主要介绍了焊齿破岩滚刀钻头的钻进工作原理，在桩基施工中的钻进技术参数，滚刀刀齿的修复及应用效果。     

Quaternary vertical offset and average slip rate of the Nojima Fault on Awaji Island, Japan

Abstract Drilling was carried out to penetrate the Nojima Fault where the surface rupture occurred associated with the 1995 Hyogo-ken Nanbu earthquake. Two 500 m boreholes were successfully drilled through the fault zone at a depth of 389.4 m. The drilling data show that the relative uplift of the south-east side of the Nojima Fault (south-west segment) was approximately 230 m. The Nojima branch fault, which branches from the Nojima Fault, is inferred to extend to the Asano Fault. From the structural contour map of basal unconformity of the Kobe Group, the vertical component of displacement of the Nojima branch–Asano Fault is estimated to be 260–310 m. Because the vertical component of displacement on the Nojima Fault of the north-east segment is a total of those of the Nojima Fault of the south-west segment and of the Nojima branch–Asano Fault, it is estimated to total to 490–540 m. From this, the average vertical component of the slip rate on the Nojima Fault is estimated to be 0.4–0.45 m/10³ years for the past 1.2 million years.     

Micro-sheeting of granite and its relationship with landsliding specifically after the heavy rainstorm in June 1999, Hiroshima Prefecture, Japan

Certain types of granite in mountainous areas are microscopically sheeted to a depth of 50 m due to unloading under the stress field that reflects slope morphology. Micro-sheets generally strike parallel to major slope surfaces and gently dip downslope, forming cataclinal overdip slopes. The cataclinal overdip slope accelerates creep movement of micro-sheeted granite, which in turn loosens and disintegrates granite via the widening or neoformation of cracks, probably in combination with stress release, temperature change, and changes in water content near the ground surface. The surface portion of micro-sheeted granite is thus loosened with a well-defined basal front, which finally slides in response to heavy rain. Innumerable landslides of this type occurred in Hiroshima Prefecture, western Japan, following the heavy rainstorm of 29 June 1999. Following such landslides, the weathering of micro-sheeted granite exposed on the landslide scar recommences, setting the stage for future landslide.     

地下钻杆透层天线

对于有耗分层媒质中的垂直透层天线，建立了Ｈａｌｌｅｎ积分方程分析法的一般理论以及求取地面电场和电压的计算方法．作为应用实例，给出了地下３层媒质中钻杆天线上的电流积分方程，并对典型的地质参数进行了数值计算．所得结果和结论，与已知的理论结果和实验规律吻合。     

关于大地电磁的静校正问题

本文从理论上严格地论述了大地电磁测深曲线静态位移的原理,简单介绍了目前国内外所采用的静校正方法,并着重分析了我们所用的压制表层电性不均匀干扰的办法及其效果。     

岩石节理粗糙度系数的分形特征

岩石节理粗糙度系数JRC是估算节理抗剪强度和变形指标最重要的参数。通过对简易纵剖面仪获取的节理表面轮廓曲线的分形研究,讨论了节理表面轮廓曲线的自相似性和JRC的自相似性,并根据实测统计资料的分析,指出了分形理论研究JRC的适用条件和有效的使用方法。由实测统计资料的JRC尺寸效应自相似性分析,认为JRC尺寸效应具分形结构。本文介绍了一种确定JRC尺寸效应分维数D的方法,由此确定的分维数D具有明确的物理意义。