隔板贯通式梁柱节点抗震性能试验研究

设计了低周反复荷载作用下3个十字形足尺隔板贯通式梁柱节点试件(其中2个节点的柱子浇筑了混凝土,1个为空钢管)的拟静力试验。通过研究拟静力试验所得的滞回曲线求得该节点的等效阻尼比,衡量它的耗能能力。从恢复力特性曲线得到了和一次加载相接近的骨架曲线,节点的初始刚度和刚度退化等参数。通过这些从强度、变形和能量等三方面判别和鉴定隔板贯通式梁柱节点的抗震性能,并得出了一些具有参考价值的结论。     

An inexpensive and portable drill rig for bedrock groundwater studies in headwater catchments

Bedrock groundwater dynamics in headwater catchments are poorly understood and poorly characterized. Here, we present an inexpensive and portable bedrock drilling system designed for use in remote locations. Our system is capable of drilling bedrock wells up to 11 m deep and 38 mm in diameter in a wide range of bedrock types. The drill consists of a lawn mower engine adapted to rotate a diamond tipped coring bit, a small water pump to cool and flush the drill bit and a scaffolding platform for stable footing on steep slopes. The complete drilling assembly costs under $ 2000 USD. Here, we show proof‐of‐concept of our approach with 40 successful wells drilled in different geological substrates, including a conglomerate at the Maimai experimental catchment in New Zealand, volcanic breccias at the HJ Andrews experimental watershed in Oregon, USA, sandstone and siltstone at the Alsea watershed in Oregon, USA, and basalt at the Los Gavilanes experimental watershed in Veracruz, Mexico. We also present a transparent comparison between our design and other portable bedrock drilling systems and outline the strengths and weaknesses of each system. Copyright © 2011 John Wiley & Sons, Ltd.     

Fractographic determination of joint length distribution in chalk

Summary Measurements of fracture joint distribution combined with determinations of plume length and orientation on a vertical section of a single chalk layer near Beer Sheva, Israel, reveal that joints marked by unilateral and circular plumes are skewed towards the shorter sizes while joints decorated by bilateral plumes are skewed towards the longer sizes. The mean lengths of the unilateral and bilateral joints are 66.5 cm and 155.6 cm, with standard deviations of 30 cm and 60.6 cm, respectively. These results as well as joint length observations from other areas seem to suggest a bimodal length distribution. However, since the minor maximum is generally very weak, and due to some additional uncertainties, further confirmation of the present observations is needed.     

Shear resistance of jointed rock masses and stability calculation of rock slopes

Summary Based on an extension to a model originally proposed by Zhang (1990), a method for estimating the shear strength of a jointed rock mass containing two joint sets is developed. Compared to the original method in which only a single en-echelon joint set was considered, the new method has the following advantages: (1) it allows a much more realistic joint pattern to be incorporated; (2) the effects of joint connectivity and intersection angle between joint sets on shear strength are included. Use of the new method is demonstrated by application to the calculation of the stability of slopes in jointed rock. The importance of joint connectivity, joint persistence and joint set intersection angle on slope stability, as predicted by the model, is revealed.     

中心取样空心螺旋钻进法

中心取样空心螺旋钻进法是新发展起来的钻进工艺,阐述了螺旋钻进法的应用与发展.并论述了各种中心取样空心螺旋钻进法的钻具结构与施工方法.包括内钻杆柱式中心取样钻具、绳索升降式中心取样钻具.摩斯取样系统以及詹姆科绳索回收取样装置.     

Tomographic determination of 3-D crustal structure — Joint inversion of explosion and earthquake data

In this paper, the theory and method, obtaining the tomographic determination of three-dimensional velocity structure of the crust by use of the joint inversion of explosion and earthquake data, are given. The velocity distribution of the crust is regarded as a continuous function of the spatial coordinates without parametrization of the velocity model ahead, so that the inversion solution would not be influenced by different parametrization procedures. The expressions of integration kernels, which relates the two kinds of data sets, are also given. The authors have processed the observed data in Tangshan earthquake region by the method proposed in this paper, and obtained the tomographic results of the middle and upper crust structures in this region. The comparison of these results with the result obtained only by the explosion data, has also been made.     

Centrifuge Modeling of Rock Slopes Susceptible to Block Toppling

Summary This paper presents the results of centrifuge tests that were aimed at validating the Goodman-Bray method for rock slope toppling analysis. The Goodman-Bray method was extended by the authors to accommodate non-persistent basal planes of rock columns. Two gypsum column models, with and without anchors were used to represent the failure modes. Measured critical centrifuge accelerations were in agreement with the results obtained from numerical modeling. A background of the toppling slope failures associated with a large hydropower project in China instigated the need for the centrifuge study. The centrifuge model tests used an artificial rock. The observed failure mode did not follow a straight failure plane as proposed by Goodman and Bray. The failures revealed a bi-planar slip surface with a deep-seated portion near the toe of the slope. The outcomes of the centrifuge tests illustrated the need to search for the critical failure surface when performing a toppling analysis. The search technique is similar to that usually performed in a conventional sliding analysis.     

Nonlinear seismic response analysis of arch dam-foundation systems- part II opening and closing contact joints

A time-domain method for the analysis of arch dam-foundation rock dynamic interaction during earthquake was proposed, and the dynamic relaxation technique was adopted to obtain the initial static response for dynamic analysis by [Du et al. (2005). The paper has been contributed to Bulletin of earthquake engineering]. In this paper, a nonlinear explicit method in time domain considering the opening and closing effect of contact joints on arch dam during earthquake is further proposed by introducing the dynamic contact force model into the method. The simulation accuracy of dynamic contact force model is verified by comparing its calculation result and test result of scale model on shaking table. Finally, the influence of joints on the seismic response of Xiaowan arch dam is studied by the proposed method and some conclusions are given.     

3D裂隙网络随机模拟及其工程应用研究

岩体中存在的大量随机分布的裂隙对岩体的工程性质及稳定性有着极其重要的影响。传统的工程地质研究方法难以客观地描述其空间分布特征。应用概率与统计学的理论 ,通过统计分析得到裂隙的分布规律性 ,采用随机模拟的方法实现与统计分布相适应的裂隙网络是研究随机裂隙宏观特征的有效途径。通过模拟所得的 3D裂隙网络 ,进一步研究了裂隙的连通特征及工程开挖面上的稳定分析与加固措施优化的方法     

气举反循环钻深度的理论计算与加深试验

运用气举反循环钻进、在满足一定条件下适当增加双壁钻具长度即可得到较大钻进孔深，本文通过理论计算及实验，证实了使用现有设备，气举气循环可以更好的满足超午米深水井的施工要求。