草根加筋土的室内三轴试验研究

用室内三轴试验方法研究了草根加筋土的应力-应变及强度特性,探讨了在不同加筋情况下草根加筋土抗剪强度指标的变化规律,分析了素土和草根加筋土的变形破坏模式以及筋材在土体剪切过程中的阻抗机理。试验结果表明：（1）草根加筋土的强度和抵抗变形的能力较素土有显著的增强;（2）对于抗剪强度指标,与素土相比草根加筋土的内摩擦角变化较小（相对变化率绝对值在11 %以内）,但黏聚力增长较大（最大可达9倍）;（3）在草根加筋层数一定的情况下,随着加筋量的增加,草根加筋土的主应力差值、抗剪强度值以及黏聚力值呈现先增加后降低的趋势,亦即加筋层数相同时存在最佳含根量。本研究结果对于深入认识植被护坡机理和合理选择植被密度具有指导意义。     

兰临高速公路袁家湾滑坡演化机理

位于兰临高速公路k15+000～k15+500段的袁家湾滑坡系公路修建时开挖高陡边坡所诱发的顺层岩质滑坡,因工程设计和岩体结构等原因,从开挖伊始直到运营期间,该滑坡一直持续滑动而久治不愈,滑坡规模大、危害严重,具有重复性和继承性滑动特征。根据其地质条件、工程特征以及滑动特征和滑动历史,采用工程地质分析、物理模型试验和FLAC3D数值模拟等方法,分析了该滑坡产生的原因、演化机理和过程。     

大试管回流消解-等离子体发射光谱／质谱法测定植物样品中多元素

采用大试管和红外加热的多孔控温消解炉的简单装置消解植物样品,电感耦合等离子体发射光谱／质谱法测定其中的主量和痕量元素,对消解温度、消解时间、消解溶剂、样品取样量等条件进行考察。用植物国家一级标准物质进行前处理及测定,验证方法的可行性,测定值与标准值基本吻合。方法不仅能同时测定B、Ba、Ca、Cd、Cu、K、Mg、Mn、Na、Ni、P、S、Zn、CoSr、Pb、Cr等元素,还适用于Hg、As挥发性元素的消解测定。方法的精密度（RSD,n=10）≤10％。     

云母石英片岩的三轴蠕变试验研究

在三轴蠕变试验的基础上,通过对径向蠕变和轴向蠕变的比较研究,得出云母石英片岩的蠕变变形和长期强度特点:径向蠕变变形比轴向蠕变变形敏感,以径向蠕变长期强度作为长期强度更合理;围压越大,对径向变形的约束能力越强,径向蠕变长期强度和轴向蠕变长期强度均增加,径向蠕变长期强度与轴向蠕变长期强度的比值减小。同时指出进行径向蠕变研究的意义。     

Dynamics and interaction of organic carbon, turbidity and bacteria in a karst aquifer system

The dynamics of organic carbon (OC), turbidity, faecal indicator bacteria and physicochemical parameters was studied in a karst system near Yverdon, Switzerland. Online measurements and sampling were done at a swallow hole draining an agricultural surface (the input), and two groups of springs (the outputs) that often show bacterial contamination. A fluorescent tracer that was injected into the swallow hole during low-flow conditions first arrived at the springs 10–12 days after injection; the total recovery rate was 29%. Previous tracer tests during high-flow conditions gave shorter travel times. After a major rainfall event, a primary turbidity peak was observed at the springs. It coincides with the rising limb of the hydrograph, indicating remobilisation of autochthonous particles from the aquifer. A secondary turbidity peak occurs several days later, suggesting the arrival of allochthonous particles from the swallow hole. Wider peaks of OC and bacteria were observed simultaneously. Applying methods from molecular microbiology (PCR-DGGE) allowed characterisation of the bacterial communities at the swallow hole and the springs. The results demonstrate that the swallow hole is an important source of groundwater contamination, while its contribution to aquifer recharge is insignificant. OC appears to be a better indicator for bacterial contamination than turbidity.     

黄土路堑边坡变形破坏机理的三轴试验研究

通过原状黄土的减压三轴压缩试验,研究了黄土边坡不同深度不同含水量土体的应力-应变关系,并与原状黄土的常规三轴试验结果进行了比较,发现减压三轴试验能合理地模拟和解释开挖卸荷作用下黄土边坡土体的变形与破坏过程。试验结果表明:坡脚开挖卸荷时,黄土边坡中浅层非饱和黄土易出现应变软化或塑性流动,强度较低,易产生较大变形,而深层饱和黄土仅在高围压下发生应变硬化,强度增加,在中低围压时均发生应变软化现象。分析认为黄土边坡特殊的工程地质条件,使得黄土边坡的特定部位在开挖卸荷作用下常形成了不利于土体稳定的含水量和围压组合,导致坡体特定部位的土体变形破坏,进而诱发边坡的变形破坏;开挖卸荷作用下黄土边坡变形破坏的力学机制应为蠕滑-压致拉裂或牵引式滑坡。     

相位相关速度分析方法研究及效果比较

利用统计假设原理及地震信号瞬时相位的相关特性,计算了叠加速度谱。理论模型的试算和实际资料的处理结果表明:与常规速度分析方法相比,该方法具有较高的时间分辨率和速度分辨率,而且抗噪性非常好。该方法不仅不受时窗边界奇异性的影响,还可以有效地避免边缘效应,反映更多反射波信息。该方法对于层速度的精确计算很关键,同时也表明了统计方法用在多道信号估计上是有效的。     

黑龙江绥芬河市北寒葱河河谷地下水水质保护及开发利用建议

为掌握绥芬河市北寒葱河河谷地下水的水质状况,向地方提供合理的水资源开发建议,本研究以地质、水文地质调查、水样采集等手段为基础,利用模糊综合评价法和层级阶梯法分别进行了研究区地下水水质和污染状况评价,应用物探测试、抽水试验等原位测试技术论证了区域地下水的富水性。以上工作基本查明了研究区地下水的水量和水质现状.认为研究区裂隙承压水一般为Ⅰ~Ⅲ类水质,污染等级为未污染水,水质状况较好,污染程度较低,宜于饮用;中生代构造破碎带涌水量可达350m3·d-1以上,建议地方政府应重点围绕构造破碎带开展物探找水,并开展地下水源地分区保护规划.     

Seismic design and testing of buckling‐restrained braces with a thin profile

A thin‐profile buckling‐restrained brace (thin‐BRB) consists of a rectangular steel casing and a flat steel core that is parallel to a gusset plate. A thin configuration reduces the width of the restraining member and thus saves usable space in buildings. However, deformable debonding layers, which cover the steel core plate in order to mitigate the difference between the peak tensile and compressive axial forces, provide a space for the steel core to form high mode buckling waves when the thin‐BRB is under compression. The wave crests squeeze the debonding layers and produce outward forces on the inner surface of the restraining member. If the restraining member is too weak in sustaining the outward forces, local bulging failure occurs and the thin‐BRB loses its compression capacity immediately. In order to investigate local bulging behavior, a total of 22 thin‐BRB specimens with a ratio of steel core plate to restraining steel tube depth ranging from 0.3 to 0.7 and axial yield force capacities ranging from 421 kN to 3036 kN were tested by applying either cyclically increasing, decreasing, or constant axial strains. The restraining steel tube widths of all the specimens were smaller than 200 mm and were infilled with mortar with a compressive strength of 97 MPa or 55 MPa. Thirteen of the 22 thin‐BRB specimens' restraining members bulged out when the compressive core strains exceeded 0.03. A seismic design method of the thin‐BRB in preventing local bulging failure is proposed in this study. Test and finite element model (FEM) analysis results suggest that the outward forces can be estimated according to the BRB compressive strength, steel core high mode buckling wavelength, and the debonding layer thickness. In addition, the capacity of the restraining member in resisting the outward forces can be estimated by using the upper bound theory in plastic analysis. Both the FEM analysis and test results indicate that the proposed method is effective in predicting the possibility of local bulging failure. Test results indicate that the proposed design method is conservative for thin‐BRB specimens with a large steel core plate to restraining steel tube depth ratio. This paper concludes with design recommendations for thin‐BRBs for severe seismic services. Copyright © 2015 John Wiley & Sons, Ltd.     

切缝药包在定向断裂爆破中的应用研究

对切缝药包用于岩石定向断裂爆破进行了一定的研究,对相关爆破参数进行了设计,并利用模型试验进行验证,实验结果表明切缝药包的定向断裂控制效果好。现场试验也表明该法是一种比较理想的断裂控制爆破技术。最后指明该技术有待进一步研究的方向。