软岩的强度—变形—时间之间关系的试验分析

对软岩和有不连续面的软岩试样进行一系列固结不排水三轴压缩和蠕变试验,测定并分析了它们在正常固结和超固结状态下的应变软化性状、蠕变特性和残余强度的变化规律。探讨了软岩中存在的不连续面对应力－应变关系、残余强度特性和蠕变应变速率的影响。     

汤渡河大坝爆破振动及混凝土声波检测

运用爆破振动测试与混凝土声波检测相结合的方法,对汤渡河水库大坝混凝土拆除爆破进行了有效的控制,在保证大坝安全的前提下,大大加快了施工进度,是一种行之有效的方法,对同类工程有较大的借鉴作用。     

某高层建筑模型振动台试验结果分析

本文分析了广州市某２８层高层建筑模型模拟地震振动台试验结果,对此建筑的抗震性能进行了评价,考究了设置摩擦耗能支对其动力反应的减震作用。     

新型耗能(阻尼)减震器的开发与研究

本文阐述了耗能减震的概念和原理,提出了耗能减震器设计的新思想,研制开发了多种新型实用耗能（阻尼）减震器,并对其中的圆环耗能器、双环耗能器、架颈圆环耗能器、弹塑性－摩擦复合耗能器等进行了循环荷载试验,考察了耗能器代作性能和耗能性能,对已装与未装耗能减震器的钢筋混凝土框架模型进行了伪动力对比实验,进一步考察了耗能减震器的减震效果。在试验研究的基础上,地耗能（阻尼）减震结构体系的分析方法进行了研究,并编     

某些测震学指标与地震相关性研究

通过对１０项测震学指示宾１０ａ的大范围时空扫描得出的有震和无震“预报”进行了与５．０级以上的地震的相关性研究,结果证明这１０项指标当显性水平较低时,均可通过统计检验,表明是有效的提取异常指标。作还依统计检验结果对１０项测震学指标与地震相关性好坏进行了排序,并通过分析得到各指标今后优化方向．     

用好ISO9000标准，确保土工试验质量

强调过程控制是ISO9000族标准的精华。深入领会ISO9000标准,通过转化分配用好ISO9000模式中每个要素的规定,是改进我公司土工试验生产过程管理,提高土工试验质量的保证。     

围压下构造煤的孔隙度和渗透率特征实验研究

利用岩石孔隙度和渗透率测量系统,对不同煤质及不同类型构造煤的孔隙度和渗透率进行测试,结果表明,随围压增加构造煤的孔隙度和渗透率降低;不同煤质和不同类型构造煤有不同的变化规律,并进一步探讨了煤的结构,气体压力,气体成分等因素的作用机理。     

A new solution for a partially penetrating constant‐rate pumping well with a finite‐thickness skin

A mathematical model describing the constant pumping is developed for a partially penetrating well in a heterogeneous aquifer system. The Laplace‐domain solution for the model is derived by applying the Laplace transforms with respect to time and the finite Fourier cosine transforms with respect to vertical co‐ordinates. This solution is used to produce the curves of dimensionless drawdown versus dimensionless time to investigate the influences of the patch zone and well partial penetration on the drawdown distributions. The results show that the dimensionless drawdown depends on the hydraulic properties of the patch and formation zones. The effect of a partially penetrating well on the drawdown with a negative patch zone is larger than that with a positive patch zone. For a single‐zone aquifer case, neglecting the effect of a well radius will give significant error in estimating dimensionless drawdown, especially when dimensionless distance is small. The dimensionless drawdown curves for cases with and without considering the well radius approach the Hantush equation (Advances in Hydroscience. Academic Press: New York, 1964) at large time and/or large distance away from a test well. Copyright © 2007 John Wiley & Sons, Ltd.     

Process identification at a slow‐moving landslide in the Vorarlberg Alps

A fine‐grained slope that exhibits slow movement rates was investigated to understand how geohydrological processes contribute to a consecutive development of mass movements in the Vorarlberg Alps, Austria. For that purpose intensive hydrometeorological, hydrogeological and geotechnical observations as well as surveying of surface movement rates were conducted during 1998–2001. Subsurface water dynamics at the creeping slope turned out to be dominated by a three‐dimensional pressure system. The pressure reaction is triggered by fast infiltration of surface water and subsequent lateral water flow in the south‐western part of the hillslope. The related pressure signal was shown to propagate further downhill, causing fast reactions of the piezometric head at 5·5 m depth on a daily time scale. The observed pressure reactions might belong to a temporary hillslope water body that extends further downhill. The related buoyancy forces could be one of the driving forces for the mass movement. A physically based hydrological model was adopted to model simultaneously surface and subsurface water dynamics including evapotranspiration and runoff production. It was possible to reproduce surface runoff and observed pressure reactions in principle. However, as soil hydraulic functions were only estimated on pedotransfer functions, a quantitative comparison between observed and simulated subsurface dynamics is not feasible. Nevertheless, the results suggest that it is possible to reconstruct important spatial structures based on sparse observations in the field which allow reasonable simulations with a physically based hydrological model. Copyright © 2004 John Wiley & Sons, Ltd.     

A density‐dependent elastoplastic hydro‐mechanical model for unsaturated compacted soils

This paper presents a three‐dimensional elastoplastic constitutive model for predicting the hydraulic and mechanical behaviour of unsaturated soils. It is based on experimental results obtained from a series of controlled‐suction triaxial tests on unsaturated compacted clay with different initial densities. Hydraulic hysteresis in the water‐retention behaviour is modelled as an elastoplastic process, with the elastic part modelled by a series of scanning curves and the elastoplastic part modelled by the main drying and wetting curves. The effect of void ratio on the water‐retention behaviour is studied using data obtained from controlled‐suction wetting–drying cyclic tests on unsaturated compacted clay with different initial densities. The effect of the degree of saturation on the stress–strain‐strength behaviour and the effect of void ratio on the water‐retention behaviour are considered in the model, as is the effect of suction on the hydraulic and mechanical behaviour. The initial density dependency of the compacted soil behaviour is modelled by experimental relationships between the initial density and the corresponding yield stress and, thereby, between the initial density and the normal compression line. The model is generalized to three‐dimensional stress states by assuming that the shapes of the failure and yield surfaces in the deviatoric stress plane are given by the Matsuoka–Nakai criterion. Model predictions of the stress–strain and water‐retention behaviour are compared with those obtained from triaxial tests with different initial densities under isotropic compression, triaxial compression and triaxial extension, with or without variation in suction. The comparisons indicate that the model accurately predicts the hydraulic and mechanical behaviour of unsaturated compacted soils with different initial densities using the same material constant. Copyright © 2006 John Wiley & Sons, Ltd.