Paratacamite from Gypsum Veins in Sandstones of the Kuqa Basin,Xinjiang, China: Implications for a New Epigenetic Cu Enrichment Mechanism

The Kuqa Basin filled with Paleogene evaporite series is located in the northeast of the Tarim Basin, Xinjiang, China. It is famous for sandstone‐hosted Cu deposits formed by synsedimentary processes. However, our recent studies reveal that there has been another Cu mineralization mechanism in this basin. Field investigations show that there is a close relationship among faults, salt domes, and brine. Cu deposits are mainly located in two east–west‐trending anticlinal belts in the basin, adjacent to salt domes in the belts. Cu minerals in gypsum veins of the Jidike and Kangcun formations have been investigated by SEM, EDS, and X‐ray diffraction methods. The occurrence of paratacamite in gypsum veins has been reported to coexist with glauberite and halite in the joint planes of sandstones. In addition, it occurs accompanying residual crystal salt encrustation in limestone fractures, or in sandstones in dendritic form. These features indicate that the surface‐Cu enrichment in the Kuqa Basin might have originated from Cu‐bearing brine in the underlying evaporite units, which migrated upward along fractures. In addition, the presence of H₂S in the east–west fault belt in the Kuqa Basin, and the discovery of surface sulfur, calcium carbonate, and covellite, suggest thermochemical sulfate reduction near salt domes in the deeper parts of the rock units. This process resulted in the generation of reduced brine and provided a favorable environment for Cu enrichment. Therefore, the surface‐Cu mineralization near salt domes is interpreted to be the result of Cu‐bearing brine migrating upward to the surface along faults (or joints) following the intrusion of deep salt domes. The geological evidence indicates the presence of reducing brine and Cu‐bearing brine near the salt dome in the deeper rocks of the Kuqa Basin, thus making the intrusive contact zone of the salt dome a favorable site for the epigenetic enrichment of Cu. Our study demonstrates that Cu enrichment in the Kuqa Basin resulted not only from synsedimentary deposition but also through epigenetic enrichment associated with salt dome intrusion and brine‐rich fluids.     

潜孔锤跟管钻进技术在小浪底水利观测孔工程的应用

在黄河小浪底水利枢纽观测孔工程中,采用气动潜孔锤跟管钻进结合双动力头钻机成功地解决了普通气动潜孔锤及常规钻进工艺在厚度达50 m渣石层成孔难的问题。     

JMD型滤池双层滤料的净水试验及比较

大量的试验数据表明石英砂和陶粒组成的双层滤料，其净水处理性能明显好于石英砂和无烟煤双层滤料以及单层石英砂滤料，特别是出水浊度、微絮凝作用，反冲洗周期、藻类的去除、絮凝剂的使用量等指标上具有明显优势，陶粒做为一种新的水处理滤料，正被应用于净水和污水处理。     

用双孔热解石墨管原子吸收法测定微量金

石墨炉原子吸收法在对化探样品微量金的测试过程中存在因载气进入而使待测样品溅出的问题。利用自制的双孔热解石墨管代替普通石墨管可解决上述问题。通过大量的实验证明,仪器在最佳工作条件下,硫脲介质浓度10g·l-1、解脱时间40min时,获得检出限0 10×10-9、加标回收率为98 4%～103 7%的分析结果。     

电偶源频率电磁测深中比值视电阻率和阻抗相位的联合反演

本文论述了电偶源频率电磁测深中,利用比值视电阻率和相应阻抗相位进行联合反演的必要性和可能的应用前景及具体实施方法。理论模型和实际观测资料的反演试验表明这一联合反演是可行和有效的,且明显地优于视电阻率和阻抗相位的单参量反演。     

川西北地区金矿床的双源复合成矿新认识

川地区金成矿受构造－岩相和构造－岩浆双重控制。据该区金矿的产出特点和成矿特征,可将区内金矿（点）划分为层控型、岩控型和双控型。在进行区域成矿分析时应注重构造－岩相和构造－岩浆的致矿、控矿作用,任何片面怀的成矿分析都可能导致成矿认识的简单化和肤浅化。双源复合成矿概念的提出与应用,有助于对本区成矿认识的深化和研究水平的提高。     

对电感耦合等离子体质谱法测定的地下水中Ag元素不确定度的评定

采用不确定度连续传递模型,对电感耦合等离子体质谱法测定的地下水中Ag元素的不确定度进行评定。采用双误差回归的方式对标准曲线进行拟合,通过计算出各分量的不确定度,合成得到测量结果的总不确定度。当实际样品中Ag的含量较低时,其曲线拟合产生的不确定度影响较大,甚至成为主导因素。     

双误差回归模型在ICP-MS测定饮用水中锶的不确定度评定的简化应用

在计算电感耦合等离子体质谱法测定饮用水中锶的浓度(x)时,由于标准系列配制和仪器检测过程中信号(y)漂移产生的不确定度会传递给最终的计算结果。普通的一次或多次线性拟合结果不能真实地反映对于x、y值都含误差的数据拟合情况。文章对标准曲线进行了双误差回归计算,从双误差回归线性方程推导出校准曲线拟合过程产生不确定度的计算公式,建立了方法检出限与曲线拟合参数(x、y、曲线截距和斜率)及其相关不确定度之间的关系式,依据误差连续传递公式及不确定度分量计算公式简化了合成不确定度的表达式。从合成不确定度计算公式中可得出,水样中锶含量的浓度越低,其对应的不确定度越大;标准系列配制过程不细致、仪器灵敏度低,方法检出限越差,与实际测试情况符合。     

煤田地质超深孔钻探工艺

在对深部煤田地质钻孔钻进工艺研究的基础上,有针对性选择使用聚合物泥浆,解决了基浆配制用水及泥浆抗地表水水质污染问题。通过改变双管钻具长度和改换取心钻头的切削具,满足软硬互层对钻头钻进效率的影响。在煤系地层钻进中,除采用常规的单管钻具钻进外,在见煤预告下过后,采用加长双管取心钻具,既可保证了回次进尺,又可保证岩心的采取。多项措施落实,不仅解决了生产中的一些难题,收到了较好的效果,而且创造了河北省煤田地质局煤田地质单孔钻探深度2 009.12m的新纪录,为今后深部钻孔的施工积累了经验。