Testing and modeling of the mechanical behavior of dolomite in the Wudongde hydropower plant

In order to understand the mechanical behaviours of the surrounding rocks in the underground caverns of the Wudongde hydropower plant, triaxial tests are performed on a type of dolomite. It is revealed that damage induced by crack development is the main factor controlling the nonlinear plastic deformation and failure behaviour of the dolomite in both pre- and post-peak regimes. Based on this understanding, a coupled elastoplastic damage model is developed for capturing the dolomite’s mechanical behaviours. In the model, the effects of plasticity and damage on rocks is described by introducing plastic hardening and damage softening commonly in the plastic yield surface. Which are both derived from a suitable Helmholtz free energy function. The model is used to simulate the triaxial tests. Comparisons between test results and the numerical modelling show that the developed model is capable of describing the macro mechanical behaviours of the Wudongde dolomite.     

从成岩-蚀变特征探讨塔深1井白云岩储层成因

塔深1井钻遇的寒武系地层属于中寒武统阿瓦塔格组和上寒武统丘里塔格下亚群。阿瓦塔格组以灰色-深灰色粉晶-细晶藻白云岩为主,丘里塔格下亚群以灰色-浅灰色晶粒结构白云岩与残余亮晶结构白云岩为主。藻白云岩在阴极发光下以明亮的中等强度砖红色-桔黄色为主要特点,具有相对偏重的δ18O值(-6.3‰~-4.5‰,平均为-5.3‰,VPDB)、相对较高的稀土总量以及与正常海相碳酸盐岩相似的稀土配分样式。晶粒白云岩与残余亮晶结构白云岩在阴极发光下以偏暗的中等强度蓝紫色-砖红色为主要特点,具有相对偏轻的δ18O值(-9.2‰~-5.7‰,平均为-7.5‰,VPDB)、相对偏低的稀土总量、Eu正异常与重稀土明显亏损为特点的稀土配分模式。阿瓦塔格组和丘里塔格下亚群白云岩在上述岩石学特征和地球化学特征上的差异表明储层发育的成岩-蚀变过程存在差异。研究认为,埋藏较深的阿瓦塔格组优质储层的形成受多种因素控制,其中准同生期大气淡水作用下石膏结核的溶解及非稳定碳酸盐矿物的溶解奠定了基础,后期成岩改造及流体作用进行了强化,局部遭充填破坏。     

Factors influencing undrained strength of fine-grained soils at high water contents

Understanding the undrained strength of fine-grained soils has been of interest to geotechnical researchers from many practical considerations. In several civil engineering applications, water content of soil is quite high being near or above the liquid limit of soils, and understanding the factors responsible for imparting the strength of soil at high water contents is of great significance. Recently, it has been reported in the literature that the shear strength of soils at these limiting water contents has significant variation. However, the reasons and the factors that probably influence for this variation have not been reported in the literature. This experimental investigation is an attempt in the direction of understanding the reasons for the variation in the undrained strength at higher limiting water content, namely liquid limit considering the various influencing factors like clay mineralogy and fine-sand content present in soil used for determining liquid limit. The results from this study are quite revealing and have been explained based on the mechanisms controlling the undrained strength at liquid limit.     

Hydrothermal Dolomite: A Review and PerspectiveEI北大核心CSCD

Hydrothermal dolomite commonly closely associates with oil-gas reservoirs and sediment-hosted Pb-Zn deposits, the Mississippi Valley-type (MVT) Pb-Zn deposits in particular. Host rocks of MVT deposits usually experienced extensive dolomitization, and indeed, hydrothermal dolomite is considered as a useful prospective indicator for MVT mineralization. However, genetic link between the hydrothermal dolomitization and MVT Pb-Zn mineralization is a matter of debate. This paper briefly reviewed the nomenclature and research history of hydrothermal dolomite, introduced the major geological, geochemical characteristics, and distribution of hydrothermal dolomite, spatial and possibly genetic relationship between hdyrothermal dolomite and hdyrothermal ore deposits and oil-gas reservoirs based on case studies including the occurrence of hydrothermal dolomites in MVT deposits in Southwest China. The temporal and genetic relationships between dolomitizaiton and thermal sulfate reduction, sulfide precipitation and thus the location of ore mineralization well worthy more attention, and comprehensive geological and isotope geochemical and state of art in situ techniques will contribute to understanding of the genesis of hydrotherml dolomite and the spatially related ore deposits and oil-gas reservoirs. © 2018, Science Press. All right reserved.     

Surface Geophysical Methods used to Verify the Karst Geological Structure in the Built-up Area: A Case Study of Specific Engineering-Geological Conditions

This article presents a research study of complex limestone karst engineering-geological conditions in the municipality Valaská near Banská Bystrica in Slovakia. The aim of the study is to demonstrate the impossibility of spatial identification of cave spaces using surface geophysical methods due to the specific engineering-geological conditions of a thick surface layer of anthropogenic fill containing highly heterogeneous anthropogenic material. Its maximum thickness is 3 m. Another specificific condition of the study area is its location in the built-up area, due to which the applicability of geophysical methods was limited. The article contains methodological recommendations to be used in analogous geological conditions with karst structures topped with anthropogenic fill, which complicates the identification of cave spaces. The recommended solution herein is the identification of the cave system using underground mapping of the karst and its projection onto the surface for which surface geophysical methods have been combined.     

四川盆地东部中二叠统茅口组热液活动特征

四川盆地中二叠统茅口组存在丰富的热液流体活动。在野外剖面和岩心观察的基础上,利用多种分析测试方法,对四川盆地东部茅口组碳酸盐岩中的热液活动特征进行了探讨。研究区茅口组热液活动包括2类,一类为硅质热液,表现为薄层硅质岩或硅质团块;另一类为碳酸盐型热液,表现为粗晶方解石和白云石充填在张性构造裂缝中或呈"雪片状"集合体,偶见少量黄铁矿、闪锌矿等金属硫化物伴生。硅质岩主量元素之间的关系表明硅质来源具有多样性,是热液硅与壳源硅的混合;黄铁矿、闪锌矿原位S同位素δ34S介于-3.91‰~-6.87‰之间,推测可能受到了微生物和基性岩浆岩的双重影响;方解石脉和具鞍状双晶的白云石脉普遍具有Ca O高于标准计量、相对富Sr和U、贫REE和Ti、Ce/Ce*明显负异常、Eu/Eu*主体正异常、Y正异常等特征,表明碳酸盐脉为热液活动的产物,流体来源也呈现出火山活动相关流体与富钙地下水混合的特点。闪锌矿富集Ge和Cd,Zn/Cd及Zn/Fe值反映了中等成矿温度。硅质岩和碳酸盐流体包裹体均一温度变化范围较大,介于54.7~294.3℃之间,与稀土元素和微量元素比值所揭示的特征吻合。研究结果表明,穿层状硅质结核和团块的首次出现往往标志着茅口组热液活动的开始,而张性构造裂缝和碳酸盐型热液活动带来的围岩白云化作用则有效地改善了白云岩储集层的物性。     

鲁西地区角闪石岩地球化学、矿物学特征及其地质意义

基性-超基性岩脉群通常形成于伸展构造背景,是示踪地幔源特征以及大陆和超大陆破裂的重要标志.鲁西地区角闪石岩为研究古元古代岩浆源和构造演化提供了一个窗口.本文对鲁西地区角闪石岩进行了岩相学、全岩地球化学及角闪石、黑云母电子探针原位分析.角闪石岩具板内构造环境,来自富集地幔.通过角闪石、黑云母成因分析,均具有幔源成因,角闪石结晶温度为702～781℃;结晶压力为29.8～228.8 MPa,结晶深度1～7.5 km,结晶时氧逸度变化范围在NNO+2.68到NNO+3.35之间.结合本次获得角闪石岩磷灰石U-Pb年龄为(1817±35)Ma,认为鲁西地区(1817±35)Ma处于板内拉伸环境,存在幔源岩浆上侵,已进入大陆裂解阶段.     

白云岩成因相关问题及主要形成模式

在综述白云岩成因研究历程和最新成果的基础上,总结阐述了与之相关的4个方面的问题:①尽管白云岩原生沉淀与次生交代成因分歧依旧,但越来越多的证据表明白云岩的形成以次生交代为主;②白云石难以直接沉淀的原因是受结晶动力学条件制约,而非热力学因素;③控制次生交代强度和规模的关键条件是富Mg流体的来源及其量的大小;④微生物活动很可能有助于白云岩的形成。关于白云岩化模式,其核心是构建富Mg流体与先成钙质碳酸盐岩相互作用的条件与场所,其中浓缩正常海水模式、萨布哈模式、混合水模式和埋藏白云岩化模式等具有一定的普遍性。理清白云岩成因问题,对于认识以白云岩及其相关的碳酸盐岩为储层的油气勘探工作尤为重要。     

The thermal maturity of sedimentary basins as revealed by magnetic mineralogy

The thermal evolution of sedimentary basins is usually constrained by maturity data, which is interpreted from Rock-Eval pyrolysis and vitrinite reflectance analytical results on field or boreholes samples. However, some thermal evolution models may be inaccurate due to the use of elevated maturities measured in samples collected within an undetected metamorphic contact aureole surrounding a magmatic intrusion. In this context, we investigate the maturity and magnetic mineralogy of 16 claystone samples from Disko-Svartenhuk Basin, part of the SE Baffin Bay volcanic margin. Samples were collected within thermal contact metamorphic aureoles near magma intrusions, as well as equivalent reference samples not affected by intrusions. Rock-Eval pyrolysis (T_max), and vitrinite reflectance (Ro) analysis were performed to assess the thermal maturity, which lies in the oil window when 435°C ≤ T_max ≤ 470°C and 0.6%–0.7% ≤ Ro ≤ 1.3%. In addition, we performed low- (<300K) and high-temperature (>300K) investigations of isothermal remanent magnetization to assess the magnetic mineralogy of the selected samples. The maturity results (0.37% ≤ Ro ≤ 2%, 22°C ≤ T_max ≤ 604°C) show a predominance of immature to early mature Type III organic matter, but do not reliably identify the contact aureole when compared to the reference samples. The magnetic assemblage of the immature samples consists of iron sulphide (greigite), goethite and oxidized or non-stoichiometric magnetite. The magnetic assemblage of the early mature to mature samples consists of stoichiometric magnetite and fine-grained pyrrhotite (<1 μm). These results document the disappearance of the iron sulphide (greigite) and increase in content of magnetite during normal burial. On the other hand, magnetite is interpreted to be the dominant magnetic mineral inside the contact aureole surrounding dyke/sill intrusions where palaeotemperatures indicate mature to over-mature state. Interestingly, the iron sulphide (greigite) is still detected in the contact aureole where palaeotemperatures exceeded 130°C. Therefore, the magnetic mineralogy is a sensitive method that can characterize normal burial history, as well as identify hidden metamorphic contact aureoles where the iron sulphide greigite is present at temperatures beyond its stability field.     

塔北地区寒武系白云岩储层裂缝充填特征与有效性

塔里木盆地寒武系白云岩储层具有年代老、埋深大、成岩作用强烈的特征,原生孔隙几乎被破坏殆尽,有效裂缝的发育程度是决定储层优劣的关键因素。根据岩芯描述、薄片鉴定、FMI成像测井、扫描电镜、阴极发光、电子探针以及流体包裹体分析等研究手段,开展了塔里木盆地北部地区(简称"塔北地区")寒武系白云岩储层的裂缝充填特征及有效性分析。塔北地区整体裂缝发育,天山南地区与塔河地区裂缝在产状、线密度、形态以及充填特征上存在差异。天山南地区裂缝线密度与有效性均低于塔河地区,充填矿物主要为自形白云石与石英,其次为方解石、石膏与黄铁矿。充填白云石分为3期,对应的温度区间分别为70℃～90℃、90℃～110℃及110℃以上,均为地层内的成岩流体成因;充填石英分两期,第一期为黏土矿物转化蚀变形成,第二期可能为热液成因。塔河地区裂缝线密度高,有效性较好,溶蚀作用发育,是有利的勘探地区,其充填物以热液矿物组合形式出现,主要为方解石,其次为石膏、鞍状白云石、黏土矿物、沥青等,重晶石以交代白云石的形式出现。充填方解石分为4期,对应的温度区间分别为70℃～100℃、100℃～130℃、130℃～180℃及180℃以上,前3期充填为不同埋深时期地层内成岩流体成因,最后一期充填为自下部运移而来的高温热液流体成因。