The effects of different sea surface temperature distributions over the western Pacific on the summer monsoon properties

A modified and improved primitive equation numerical model with p-sigma incorporated vertical coordinates is used to simulate the effects of different sea surface temperature distributions over the western Pacific on the summer monsoon properties. The different sea surface temperature (SST) distributions are automatically generated in the time integrations by using two different SST models, one of which is called the deep ocean model (DOM) and the other the shallow ocean model (SOM). The SST generated by the DOM has the distribution pattern of the initial SST which is similar to the pattern in the cold water years over the western Pacific, while the SST generated by the SOM has the pattern similar to that in the warm water years. The differences between the experimental results by using DOM and SOM are analyzed in detail. The analyses indicate that the most basic and important characteristics of the summer monsoon climate can be simulated successfully in both experiments, that means the climatic propert     

Numerical modelling and analysis of temperature controlled density currents in Tomales Bay, California

The coastal region adjacent to Tomales Bay, California is dominated by wind-driven upwelling during spring and summer and the cold, upwelled water is moved towards Tomales Bay, entering the estuary with the flood tide. If the tidal excursion is ≥6 km and the cold water subducts beneath the warmer, less dense estuarine water, a temperature controlled density current may form and intrude towards the head of the estuary as a thermally stratified bottom layer. The numerical modelling was aimed at determining the capability of the Delft3D-FLOW model to reproduce the cold ocean water intrusion events, the response (development and progression) of these intrusions to differing physical scenarios and the comparative importance of the parameters to the intrusions. The numerical model successfully reproduced the density intrusions and showed that the persistence and break down of the density intrusions were affected by a number of physical parameters, to varying degrees. The sensitivity analysis showed that density intrusion formation is controlled by tidal conditions and ocean water temperature. The strength and persistence of the developed density intrusions are influenced by wind, insolation and estuary depth. Fresh water inflow at the head of the estuary had no impact on the density intrusions. Three-dimensional numerical modelling is thus a valuable tool in understanding the estuary and its functioning.     

Evaluation of a method to reduce uncertainty in wind hindcasts performed with regional atmosphere models

For more and more applications in coastal and offshore engineering, numerical simulations of waves and surges are required. An important input parameter for such simulations are wind fields. They represent one of the major sources for uncertainties in wave and surge simulations. Wind fields for such simulations are frequently obtained from numerical hindcasts with regional atmospheric models (RAMs). The skill of these atmospheric hindcasts depends, among others, on the quality of the forcing at the boundaries. Furthermore, results may vary due to uncertainties in the initial conditions. By comparing different existing approaches for forcing a regional atmospheric model, it is shown that the models' sensitivity to uncertainties in the initial conditions may be reduced when a more sophisticated approach is used that has been suggested recently. For a specific, although somewhat brief test period, it is demonstrated that an improved hindcast skill for near surface wind fields is obtained when this approach is adopted. Consequences of the reduced uncertainty in wield fields for the hindcast skill of subsequent wave modelling studies are demonstrated. Recently, this new approach has been used together with a regional atmosphere model to produce a 40-year wind hindcast for the Northeast Atlantic, the North Sea and the Baltic Sea. The hindcast is presently extended to other areas and the wind fields are used to produce 40-year high-resolution hindcasts of waves and surges for various European coastal areas.     

一种水池中组合活动堰的潮位潮流模拟系统

水工模型实验中,潮流模拟系统往往控制复杂,且调试困难。本文给出一种用单板机控制步进电机驱动高低组合活动堰板造潮的水动力控制系统,经实验验证,本系统控制简单,调试方便,造价低廉。     

Tectonic significance of syn-rift sediment packages across the Gabon-Cabinda continental margin

The tectonic development of a continental margin is recorded in the stratigraphic successions preserved along and across the margin in terms of stratal relationships (e.g., onlap, downlap, truncation), lithofacies, biostratigraphy, and paleo-water depths. By using these observations coupled to a kinematic and flexural model for the deformation of the lithosphere, we have elucidated the tectonic significance of the preserved stratigraphy that comprises the Gabon-Cabinda margin of west Africa. Two hinge zones, an Eastern and Atlantic, formed along the Gabon-Cabinda margin in response to three discrete extensional events occuring from Berriasian to Aptian time. The Eastern hinge zone demarcates the eastern limit of a broadly distributed Berriasian extension that resulted in the formation of deep anoxic, lacustrine systems as evidenced by the silts and shales of the Sialivakou and lower Djeno Formations and the regressive packages of the upper Djeno Formation. Approximately 1.5 to 2 km of asymmetric footwall uplift was induced across the Eastern hinge zone in response to the mechanical unloading of the lithosphere during this first phase of rifting. In contrast, the Atlantic hinge, located approximately 90 km west of the Eastern hinge, marks the eastern limit of a second phase of extension that began in the Hauterivian. Footwall uplift and rotation exposed earlier syn-rift and pre-rift sediments to at least wavebase causing varying amounts of erosional truncation across the Atlantic hinge zone along much of the Gabon-Cabinda margins. We interpret the thickness variations of reworked clastic sediment of this age (e.g. the Melania Formation) between the hinge zones as indicative of variations in the degree of uplift and erosional truncation of the Atlantic hinge. For example, the absence of Melania Formation across the Congo margin implies that uplift of the Atlantic hinge was relatively minor compared to that across the Cabinda and Gabon margins, the latter being characterized by significant thicknesses of Melania Formation (or equivalent). Material eroded from the Cabinda and Gabon Atlantic hinge zone may in part account for the thick wedge of sediment deposited seaward of the Gabon-Cabinda Atlantic hinge (the Erva Formation). Our modelling suggests that this wedge of reworked elastics represents deposition by along-axis gravity flows within a deep water (≈2 km) environment. A third and final phase of extension in the late Barremian-early Aptian was responsible for breaching the continental lithosphere to form the ocean/continent boundary and thus the installation of open marine conditions. Elsewhere, the environments will tend to be marginal marine to brackish, depending on the efficiency of the Atlantic hinge zone to act as a barrier to marine enchroachment. This third rift phase reactivated both the Eastern and Atlantic hinge0zones thereby creating accomodation for the Marnes Noires Formation (and equivalent) source rock deposition between the hinges and the Falcão source rock equivalent seaward of the Atlantic hinge. Two possible scenarios exist for the lateral distribution of the Marnes Noires Formation. If the reactivated rift flank topography across the Atlantic hinge was significant, then sedimentation would be restricted between the hinge zones within discrete lacustrine settings (e.g., Congo margin). Alternatively, if hinge zone uplift was relatively minor, then a coral-rimmed archipelago may have developed parallel to the margin with restricted communication across the Atlantic hinge zone (e.g., Cabinda margin). In this latter scenario, dilution of the Marnes Noires source rocks by terrigenous input from the eroding Atlantic hinge zone should be relatively minor thereby enhancing source rock quality. Furthermore, potential marine upwelling outboard of the Atlantic hinge zone is likely the cause for the production and accumulation of organic-rich material associated with the Falcão source rock of the Kwanza basin. By late Aptian time, the remaining accomodation between the hinge zones was partially filled by across- and along-axis prograding deltaic systems of the Argilles Vertes and Tchibota Formations. The progradation and interaction of the Argilles Vertes depositional lobes resulted in the formation of residual paleo-relief. Subsequent marine incursions and flooding of this paleo-relief led to the development of basal conglomerates (the Chela ‘lag’ unconformity) grading upward into fine-grained sands and evaporites. Consequently, an inverse relationship should exist betweeb evaporite thickness (in particular, the lower members) and the thickness of the underlying Argilles Vertes and Tchibota Formations. Variations in Loeme evaporite thickness is a consequence of stratigraphic and structural control with salt instability influencing local variability.Our modelling suggests the occurrence of two distinct evaporite sequences on the Congo margin, an earlier evaporite deposited seaward (west) of the Atlantic hinge during the second and third rift phases and the late Aptian Loeme Formation deposited between the hinge zones. An evaporite sequence seaward of the Atlantic hinge is inferred on the basis of extensive diapirs and salt tectonic structures observed in seismic data. In order to match the distribution and thickness of the observed post-salt stratigraphy across the basin, however, we require large paleowater depths west of the Atlantic hinge during the later Aptian. The existence of large paleowater depths precludes the formation of thick evaporite sequences within the outer basin. Consequently, we propose that the evaporites seaward of the Atlantic hinge were formed during the syn-rift development of the margin and are not contemporaneous with the post-rift Loeme salts deposited between the hinge zones. This double salt hypothesis is consistent with observations from the conjugate Brazilian margin.     

Sea state characterisation of the test site of an offshore wave energy plant

The Archimedes Wave Swing (AWS) pilot plant, rated at 2 MW, was tested offshore at Póvoa de Varzim in northern Portugal in 2004, gathering a large team of engineers and scientists. The Mechanical Engineering Department of Instituto Superior Técnico was involved, following previous work done for the project. The present paper describes one of the studies conducted. It aims to characterise the sea state at the actual location of the pilot plant using the available pressure sensors. Two approaches were performed: a first one purely based in linear wave theory, neglecting the presence of the device, and a second one, based on the results from a Boundary Element Method (BEM) code named AQUADYN, originally developed at École Centrale de Nantes (France), which allowed a detailed quantification of the effects of the presence of the plant on the wave profile directly above it. Comparisons with a Datawell Waverider buoy located at a certain distance from the plant also played an important role in the current study.     

Spatial variation of nutrients and primary productivity in the Rufiji Delta mangroves,Tanzania

Determinations of spatial and temporal variations in organic matter and nutrient dynamics in water and sediments are crucial for understanding changes in aquatic bodies. In this study, we (i) determine the spatial dynamics of dissolved inorganic nutrients, during the transition from the dry to the rainy season, and (ii) provide future productivity predictions for the Rufiji Delta mangroves, Tanzania, based on the input of various nutrients. Water samples were collected from six locations, three times per year between April 2012 and January 2014, and analysed for dissolved nutrients, total organic and inorganic carbon, chlorophyll a, chlorophyll b and total carotenoids. The prediction of future net primary productivity in the Rufiji mangroves was undertaken using the software STELLA. The mean nutrient concentrations were of the order: nitrate > phosphate > ammonium > silica > dissolved organic carbon. The study revealed that high nutrient concentrations occurred in the northern part of the Rufiji Delta as a result of anthropogenic influence in the watershed. Modelling of nutrient inputs into the delta indicated enhanced primary productivity, which is expected to increase the vulnerability of water quality in the near future due to eutrophication.     

Latitudinal effect on the growth dynamics of harvested stands of Typha: A modeling approach

A model was developed for Typha, to examine the effects of latitudinal changes in temperature and radiation on the partitioning of total biomass during the growing season into rhizomes, roots, flowering and vegetative shoots, and inflorescences.Regardless of initial rhizome biomass, both above and belowground biomasses converge on a equilibrium value, with the balance between total production and metabolic loss being latitude-specific. If aboveground biomass is harvested just once, then both above and belowground biomasses return to equilibrium values after several years. If the aboveground biomass is harvested annually, then both above and belowground biomasses converge on smaller equilibrium values, which are determined by the balance between the sum of production prior to harvesting and after harvesting, and the sum of annual metabolic losses and a loss due to harvesting.The model could be used in wetland management activities to predict the potential growth of Typha in given conditions as well as the responses of Typha stands to harvesting over a wide range of latitudes for times ranging from a season to several years.