Seismic stability analysis of reinforced slopes

In this paper, the seismic stability of slopes reinforced with geosynthetics is analysed within the framework of the pseudo-static approach. Calculations are conducted by applying the kinematic theorem of limit analysis. Different failure modes are considered, and for each analytical expressions are derived that enable one to readily calculate the reinforcement force required to prevent failure and the yield acceleration of slopes subjected to earthquake loading. Several results are presented in order to illustrate the influence of seismic forces on slope stability. Moreover, a suitable procedure based on the assessment of earthquake-induced permanent displacement is proposed for the design of reinforced slopes in seismically active areas.     

螺旋桩基础抗拔试验研究

异型的桩体几何形式增加了抗拔螺旋桩的桩土相互作用复杂性,抗拔试验研究有利于了解螺旋桩基础的承载机制和影响因素。通过16次原型桩抗拔试验,实测了单桩上拔荷载-位移曲线（U-Z曲线）,该曲线表现出多拐点、渐进型特点,采用单位荷载的桩顶位移变化率、桩顶位移增量以及结合地基变形特征的方法判定了3种桩型的抗拔极限荷载。用U-Z曲线、lgU-Z曲线和P/Pu-Z曲线初步分析了桩体埋深、深宽比、首层叶片埋置深度以及叶片距宽比等参数对螺旋桩基础抗拔承载性状的影响。试验表明,抗拔螺旋桩的埋深、首层叶片埋置深度和叶片距宽比存在临界点,影响桩土的工作性状和破坏模式。     

考虑滑坡渐进破坏的改进简布条分法

为考虑位移因素对于滑坡渐进性发育的影响,基于简布条分法基本原理,提出一个新的能够考虑滑带土抗剪能力与剪切位移关系的滑坡稳定性简化评价方法。该方法从以下两个方面对简布条分法进行了改进：（1）将滑动面剪应力-剪切位移本构模型与沿滑动面的剪切位移模型相结合,以考虑滑坡随着变形发展渐进破坏的过程;（2）提出局部安全系数的概念并对整体安全系数进行重新定义,物理意义更加明确。推导了该方法的计算公式,给出了其迭代计算思路,并编制Matlab计算程序。通过计算实例表明,应变软化边坡的安全系数不仅取决于土的抗剪强度指标,还与其剪应力-剪切位移关系密切相关,基于峰值强度的极限平衡条分法应用于实际工程是偏于危险的。同时该方法还可以有效地模拟边坡从开始破坏到最终滑动面贯通的发育过程,实现了坡体位移与安全系数之间一一对应的定量关系,进而实现边坡的稳定性的预测预报。     

1999年台湾集集地震震源破裂过程

使用GPS同震位移资料和远场P波记录,研究了1999年台湾集集地震震源破裂过程．根据地质构造和余震分布引入了一个由弯曲断层面构造的三段“铲状”断层模型．在使用静态GPS位移资料反演集集地震的断层破裂滑动分布时,由于集集地震断层北部近地表破裂的复杂性,在位错模型中考虑拉张分量对地表同震位移的贡献,可更好地同时拟合GPS观测资料的水平和垂向分量．而纯剪切位错弹性半空间模型和分层地壳模型都无法同时拟合水平和垂向GPS观测资料．在此基础上,同时使用静力学同震位移资料和远场地震波形记录,反演集集地震的震源破裂过程．结果表明,一种垂直于断层面的“挤压性”(负)拉张分量几乎集中分布于地震断层的浅部和北部转折处,而这一带地表破裂远较没有(负)拉张分量出现的南部断层复杂．“冒起构造”的数字模拟表明,这种在集集地震破裂转折处及北部断裂带广为出现的典型破裂造成的地表位移可以用具有负拉张分量(挤压)的逆冲断层更好地模拟．而这种负拉张分量(挤压)的分布正是地震破裂性质和几何复杂性的综合反映,震源破裂过程也显示北部转折处破裂在空间和时间上的复杂性.高滑区域与余震分布表现为负相关.     

鲲鹏山变形监测方案设计

通过论述变形监测控制网的建立与优化、变形监测点的布设、变形监测与数据处理的方法,给出了一套比较完整的鲲鹏山变形监测方案。     

Estimation of hourly and daily evapotranspiration and soil moisture using downscaled LST over various urban surfaces

Surface moisture is important to link land surface temperature (LST) to people’s thermal comfort. In urban areas, the surface roughness from buildings and urban trees impacts wind speed, and consequently surface moisture. To find the role of surface roughness in surface moisture estimation, we developed methods to estimate daily and hourly evapotranspiration (ET) and soil moisture, based on a case study of Indianapolis, Indiana, USA. In order to capture the spatial and temporal variations of LST, hourly and daily LST was produced by downscaling techniques. Given the heterogeneity in urban areas, fractions of vegetation, soil, and impervious surfaces were calculated. To describe the urban morphology, surface roughness parameters were calculated from digital elevation model (DEM), digital surface model (DSM), and Terrestrial Light Detection and Ranging (LiDAR). Two source energy balance (TSEB) model was employed to generate ET, and the temperature vegetation index (TVX) method was used to calculate soil moisture. Stable hourly soil moisture fluctuated from 15% to 20%, and daily soil moisture increased due to precipitation and decreased due to seasonal temperature change. ET over soil, vegetation, and impervious surface in the urban areas yielded different patterns in response to precipitation. The surface roughness from high-rise has bigger influence on ET in central urban areas.     

Effect of sampling and linkage on fault length and length–displacement relationship

The power-law exponent (n) in the equation: D=cL ⁿ , with D = maximum displacement and L = fault length, would be affected by deviations of fault trace length. (1) Assuming n=1, numerical simulations on the effect of sampling and linkage on fault length and length–displacement relationship are done in this paper. The results show that: (a) uniform relative deviations, which means all faults within a dataset have the same relative deviation, do not affect the value of n; (b) deviations of the fault length due to unresolved fault tip decrease the values of n and the deviations of n increase with the increasing length deviations; (c) fault linkage and observed dimensions either increase or decrease the value of n depending on the distribution of deviations within a dataset; (d) mixed deviations of the fault lengths are either negative or positive and cause the values of n to either decrease or increase; (e) a dataset combined from two or more datasets with different values of c and orders of magnitude also cause the values of n to deviate. (2) Data including 19 datasets and spanning more than eight orders of fault length magnitudes (10⁻²–10⁵ m) collected from the published literature indicate that the values of n range from 0.55 to 1.5, the average value being 1.0813, and the peak value of n _d (double regression) is 1.0–1.1. Based on above results from the simulations and published data, we propose that the relationship between the maximum displacement and fault length in a single tectonic environment with uniform mechanical properties is linear, and the value of n deviated from 1 is mainly caused by the sampling and linkage effects.     

夯扩桩半模夯扩试验及夯扩机理探讨

设计了夯扩桩半模夯扩试验，采用读数显微镜直接测读上体质点位移，获得了不同密度的均匀砂土中砂粒的位移，由此确定土体的位移场和密度场。借鉴魏西克（Ｖｅｓｉｃ）球形孔穴膨胀理论和梅耶霍夫（Ｍｅｙｅｒｈｏｆ）塑性剪切理论，结合模型试验成果，对夯扩机理作了探讨，并定性地提出了夯扩机理模式。     

地震荷载作用下顺层岩体边坡变形特征分析

应用二维离散元程序UDEC计算了地震荷载作用下边坡的位移,并将计算结果与Newmark法计算结果及震后现场实测值进行了对比。结果表明,Newmark法计算得到的位移值较实测值偏小,离散元计算得到的位移结果较Newmark法更接近于实测值。在此基础上,初步分析了地震荷载作用下坡高、坡角、岩层倾角等因素对顺层岩体边坡位移的影响规律。由分析结果可知,地震荷载下顺层岩体边坡的位移并不随坡高增加而单调增大,在坡高约100 m时位移达到最大值,坡高超高100 m位移反而有所降低;当坡高超高200 m后,位移随坡高的变化幅度不大,顺层岩体边坡的位移随坡角增加而单调增大。随岩层倾角增加边坡位移明显增大;当岩层倾角大于层面内摩擦角时,随着岩层倾角的增大,边坡变形增长幅度明显增大。     

大庆长垣外围特低渗透扶杨油层CO_2非混相驱油试验研究

大庆长垣外围有3×108t特低渗透的扶杨油层储量在注水开发条件下难以有效动用,为提高这部分储量的有效动用率,开展了CO2非混相驱油试验研究。PVT测试结果表明,扶杨油层原油较稠,体积系数小,膨胀性和收缩性小,溶解系数较低;CO2驱油细管实验最小混相压力为29 MPa,比原始地层压力高8.6 MPa,现场试验为非混相驱;长岩心实验CO2驱油采收率比注水高4~6个百分点。综合室内可行性评价实验结果看,大庆长垣外围扶杨油层开展CO2驱油试验是可行的,并于2003年初在宋芳屯油田南部开辟了注气试验区,有注气井1口,采出井5口。矿场试验结果表明,CO2驱油能够使特低渗透、裂缝不发育的扶杨油层建立起有效驱动体系,从根本上改善其开发效果,该技术有望成为特低渗透扶杨油层有效动用的可行技术。