卫星测高逆气压改正及其对海平面变化的影响

研究了全球平均大气压的变化特征,分析了传统卫星测高逆气压改正存在的缺陷,并对以常数大气压为参考值、以全球海洋平均大气压为参考值和顾及高频信号的3种逆气压改正进行了对比。根据T/P卫星测高数据对3种改正方法得到的海面高和海平面变化进行了比较分析,相比于前两种逆气压改正,顾及高频信号的逆气压改正最接近海平面的真实响应,可减少卫星测高海面高交叉点不符值RMS约5.70mm,分别提高海平面变化估计精度约18%和12%。     

逆Vening-Meinesz技术在陆地重力异常精细构制方法中的应用

逆Vening-Meinesz公式在海洋测高数据反演重力异常中得到了广泛应用,被认为是确定海洋地球重力场的有效途径之一。将该方法引入陆地,是本文的主要工作之一。由于陆地的非球面特性,需要顾及地形起伏的影响,因此,本文提出了基于均衡的逆Vening-Meinesz公式的移去恢复技术求解陆地重力异常的算法。最后通过对该算法编程试验,并对结果进行诊断分析和精度估计,结果表明该算法能够求得满足一定精度的重力异常值。     

Multiple statistical approaches for the discrimination of mangrove species of Rhizophoraceae using transformed field and laboratory hyperspectral data

This study aims at discriminating eight mangrove species of Rhizophoraceae family of Indian east coast using field and laboratory spectra in spectral range (350–2500 nm). Parametric and non-parametric statistical analyses were applied on spectral data in four spectral modes: (i) reflectance (ii) continuum removed, (iii) additive inverse and (iv) continuum removed additive inverse. We introduced continuum removal of inverse spectra to utilize the advantage of continuum removal in reflectance region. Non-parametric test gave better separability than parametric test. Principal component analysis and stepwise discriminant analysis were applied for feature reduction and to identify optimal wavelengths for species discrimination. To quantify the separability, Jeffries–Matusita distance measure was derived. Green (550 nm), red edge (680–720 nm) and water absorption region (1470 and 1850 nm) were found to be optimal wavelengths for species discrimination. The continuum removal of additive inverse spectra gave better separability than the continuum removed spectra.     

局部区域模型重力异常快速算法

地球重力场位系数模型可以用于计算局部重力扰动场元。然而随着地球重力场模型阶次的提高、局域重力场计算范围的增大,其计算速度往往不能满足工程需求。针对这一问题,在对位系数模型泰勒级数展开的基础上提出了采用向量运算、混合编程的方法,同时对连带勒让德函数Belikov递推方法中与经纬度无关的量进行了预先计算,有效提高了计算速度。提出的方法对于利用超高阶次重力场模型快速解算大范围、高分辨率重力场元数据以及累加求和计算具有一定的参考与借鉴意义。     

对可控硅调压整流电路若干问题的分析

本文比较了两种可控硅整流电路,在这两种电路中把反并联可控硅接入阳极变压器。文章介绍了电路的过压和过流的保护方法并给出了电路的计算公式和经验数据。     

加权最小范数平差的伪观测解法

首先证明了加权最小范数平差一般解的一个重要性质，由此提出了利用附加的观测值来求解加权最小范数平差问题的方法，并证明了该法与利用一般解法等价性的充要条件。     

基于等高线的DEM生成算法研究和实现

数字高程模型是近年来发展起来的为地理信息系统提供空间分析和辅助决策的数据基础。随着科学技术特别是计算机技术的迅速发展，DEM在数据获取方法、数据存储和数据处理速度等方面已经取得突破性进展。通过系统介绍生成DTM过程中等高线的离散化方法，DELAUNAY三角网的特性和基于等高线数据的TIN的建立，以及对产生的问题的一些解决方法。     

一种基于分布中心的矢量数据零水印算法

针对鲜有零水印算法能同时适用于点、线、面矢量数据版权保护,提出一种基于分布中心的矢量地理空间数据零水印算法。首先,对矢量数据进行格网划分;其次,计算格网内每个点到其算数平均值中心的距离,并将得到的距离序列与距离平均值进行比较,大于等于距离平均值,则记为1,否则为0;然后,统计格网内的0和1数量的多数,记为0或1,以此生成空间数据特征值;最后,将该特征值与置乱后的二值水印进行异或,构造出零水印图像。实验表明,文中算法能同时适用于点、线、面矢量数据,并且对常见的平移、缩放、裁剪、格式转换、随机删点等攻击鲁棒性好。     

Sensitivity of soil parameters in unsaturated zone modelling and the relation between effective,laboratory and in situ estimates

Simulation of soil moisture content requires effective soil hydraulic parameters that are valid at the modelling scale. This study investigates how these parameters can be estimated by inverse modelling using soil moisture measurements at 25 locations at three different depths (at the surface, at 30 and 60 cm depth) on an 80 by 20 m hillslope. The study presents two global sensitivity analyses to investigate the sensitivity in simulated soil moisture content of the different hydraulic parameters used in a one‐dimensional unsaturated zone model based on Richards' equation. For estimation of the effective parameters the shuffled complex evolution algorithm is applied. These estimated parameters are compared to their measured laboratory and in situ equivalents. Soil hydraulic functions were estimated in the laboratory on 100 cm³ undisturbed soil cores collected at 115 locations situated in two horizons in three profile pits along the hillslope. Furthermore, in situ field saturated hydraulic conductivity was estimated at 120 locations using single‐ring pressure infiltrometer measurements. The sensitivity analysis of 13 soil physical parameters (saturated hydraulic conductivity (K_s), saturated moisture content (θ_s), residual moisture content (θ_r), inverse of the air‐entry value (α), van Genuchten shape parameter (n), Averjanov shape parameter (N) for both horizons, and depth (d) from surface to B horizon) in a two‐layer single column model showed that the parameter N is the least sensitive parameter. K_s of both horizons, θ_s of the A horizon and d were found to be the most sensitive parameters. Distributions over all locations of the effective parameters and the distributions of the estimated soil physical parameters from the undisturbed soil samples and the single‐ring pressure infiltrometer estimates were found significantly different at a 5% level for all parameters except for α of the A horizon and K_s and θ_s of the B horizon. Different reasons are discussed to explain these large differences. Copyright © 2004 John Wiley & Sons, Ltd.