黄土液化微细观特性试验研究

黄土液化演化过程的微观机理分析是液化防御的科学问题之一。通过微细观及动力学试验探索黄土液化的本质和影响因素。首先用CT细观扫描实验探索黄土渗透液化的细观变化,研究表明土体液面上升的根本原因是弱碱性盐类胶结物的吸水作用导致土样含水面整体上升;试样达到高饱和度,大孔隙周围颗粒间胶结物质破坏后有效应力为零,土层液化。粉土的孔隙尺寸和特殊的胶结物质导致高饱和度。土样微观结构的差异也会影响土的液面上升和破坏强度。针对低黏性粉土、粉质砂土及粉质黏土的三类黄土液化实验分析表明,低黏性粉土动荷加载时间更短,更易于液化,即低粘性粉土液化最为严重,粉质砂土为中等液化,粉质黏土相比其他黄土类别不易液化。电镜扫描土样微观结构参数分析表明,土颗粒周围胶结物质的化学元素比值(Ca/Fe),以及土颗粒粒径分布和孔隙尺寸(孔隙与颗粒比)均影响液化等级,可初步判断液化的强弱。     

以颗粒物理原理认识汶川MW 7.9地震发生前临震预滑和震颤现象

发生在孕震区周边地块上的临震预滑和震颤现象,对破坏性地震预测有一定前兆意义,是值得地震学界关注的问题。选取2008年5月12日汶川M_W 7.9地震发生前,临夏和湟源地震台分量应变仪记录与临夏、恩施和西安地震台数字地震仪记录以及临夏和周至地震台深井水位仪记录,分析发现,在临震前数天至数小时,上述各地震台不同学科观测仪器均记录到一些"跃变"和"震颤"震相。文中试图以颗粒物理原理,来认识不同距离、不同台站、不同学科的观测仪器在临震前相近时间段内记录的低频和高频震相,可能是不同地块在临震前发生预滑错动后激发的预滑震相Xp和地下气体在裂隙内流动激发的震颤震相Tp。观测结果表明：2008年5月8日03时至主震发生,各地震台所处地块在相近时段内逐次发生次数不等的预滑错动,其中1-2次较大错动可在噪声背景中被识别;各地震台预滑错动方向指向或背向主震震中。据此认为：汶川M_W 7.9地震前,上述各地震台所处地块在不同大小、不同方向的力链驱动下,发生指向或背向主震震中的临震预滑现象。     

基于岩体塑性位错理论的龙门山区域构造系统演化过程

青藏高原对四川盆地的挤压作用导致了龙门山断裂带的形成及其山脉的隆起。本文以龙门山附近区域板块运动以及深部岩体力学特性为背景,采用FLAC3D软件模拟再现了时间跨度为700万年的龙门山区域构造系统演化过程。研究结果表明：在板块运动作用下,F1、F2和F3断层依次形成,贯通的断层对地表的抬升具有较强的控制作用,当断层贯通于地表后,龙门山及其以西的川西高原持续隆起,平均抬升速率约为138mm/yr,而龙门山断裂带以东的川西坳陷只有较小的抬升量,从而导致川西高原抬升8996 m, 致使该区域产生6000m左右的落差,模拟的地形特征与目前的龙门山地形地貌基本相似。依据模拟结果与实测资料,绘制了龙门山断裂带形成及其附近区域地形地貌的演化过程图,呈现了板块挤压、断层塑性位错、地表侵蚀和沉积作用等因素共同作用对地形地貌的塑造过程。     

热处理砂岩微观结构及力学性质试验研究

采用核磁共振、电镜扫描、X射线衍射、单轴压缩等试验手段对某砂岩试样不同温度下（25～900 ℃）微观结构及力学性质的变化情况进行研究。研究表明：温度对砂岩试样微观结构具有重要影响,试样总孔隙率随温度的升高而升高,在150 ℃以下,由于中、大孔隙的减少,试样渗透性反而降低;当温度超过600 ℃时,中、大孔隙快速增加,试样渗透性能大幅增加;温度升高导致砂岩试样弹性模量减小、峰值应变增大以及孔隙压密阶段变长,宏观表现为脆性降低、塑性明显增强;热处理条件下,除微观结构的变化会导致砂岩试样力学强度改变外,试样矿物成分对其力学强度也具有十分重要的影响;450 ℃以下,由于矿物成分变化较小,试样力学强度主要受到孔隙度增加的影响,表现为强度随温度升高而降低;450～600 ℃,虽然孔隙率继续增长,但由于主要矿物高岭石发生脱水以及与其他离子形成新相矿物,进而导致试样强度没有随着孔隙增加而降低,反而出现一定的增长;超过600 ℃后,孔隙尤其是大孔隙的急剧增加,导致强度重新开始降低。     

Microstructure Evolution of Organic Matter and Clay Minerals in Shales with Increasing Thermal Maturity

As the two important components of shale, organic matter(OM) and clay minerals are usually thought to strongly influence the hydrocarbon generation, enrichment and exploitation. The evolution process of OM and clay minerals as well as their interrelationship over a wide range of thermal maturities are not completely clear. Taking Yanchang(T_3y), Longmaxi(S_1l) and Niutitang(?_1n) shales as examples, we have studied the microstructure characteristics of OM and clay minerals in shales with different thermal maturities. The effects of clay minerals and OM on pores were reinforced through sedimentation experiments. Using a combination of field emission scanning electron microscopy(FESEM) and low-pressure N_2 adsorption, we investigated the microstructure differences among the three shales. The results showed that both OM and clay minerals have strong effects on pores, and small mesopore(2–20 nm) is the dominant pore component for all three samples. However, the differences between the three samples are embodied in the distribution of pore size and the location. For the T_3y shale, clay minerals are loosely arranged and develop large amounts of pores, and fine OM grains often fill in intergranular minerals or fractures. Widespread OM pores distribute irregularly in S_1l shale, and most of the pores are elliptical and nondirectional. The ?_1n shale is characterized by the preferred orientational OM-clay aggregates, and lots of pores in the composites are in the mesopore range, suggesting that over maturity lead to the collapse and compaction of pores under huge pressure of strata. The results of the current research imply that with increasing thermal maturity, OM pores are absent at low maturity(T_3y), are maximized at high maturity(S_1l) and are destroyed or compacted at over-mature stage(?_1n). Meanwhile, clay minerals have gone through mineral transformation and orientational evolution. The interaction of the two processes makes a significant difference to the microstructure evolution of OM and clay minerals in shale, and the findings provide scientific foundation in better understanding diagenetic evolution and hydrocarbon generation of shale.     

硅灰加固宁波软土的试验研究

为探索硅灰对软土的力学性质的影响,以宁波鄞州地区一种淤泥质黏土为试样,掺入不同量的硅灰,对硅灰加固土的力学性质和结构特征进行了测试。采用三轴不固结不排水剪切试验,测试分析了不同掺入量的硅灰加固土的应力应变关系,通过扫描电镜SEM照片分析了不同硅灰掺入量的硅灰加固土的结构特征。结果表明:(1)硅灰可以提高软土的黏聚力,黏聚力随着硅灰掺入量的增加而增大;(2)随着硅灰掺入量的增加,硅灰加固土的抗变形能力呈先增加后减小的趋势;(3)同一围压条件下,随着硅灰掺入量的增加,硅灰加固土的破坏偏应力逐渐增加;(4)随着硅灰掺入量的增加,硅灰加固土中大孔隙逐渐减少,小孔隙逐渐数量增加,孔径<1μm的小孔隙组分逐渐占优。     

Effect of microstructure on stress–strain and pore-pressure response of sabarmati sand under the influence of mica

ABSTRACT

Micaceous soil is believed to be detrimental for civil engineering constructions due to the effect of high compressibility, low compacted density and low shear strength. Individual mica particle has numerous intact mica flakes foliated over each other making it flexible upon loading and rebound upon unloading due to its low hardness and resilient nature. Hence, micaceous soils with mica content more than 10% are considered undesirable for highway pavements, embankments and railway track constructions. When platy mica particles are sufficiently numerous to interact with spherical sand particles, bridging and ordering phenomena are augmented within the soil mass creating unique sand-mica particle orientation (MS microstructure) unlike sand-sand particle orientation (PS microstructure). The current experimental research was conducted to evaluate the variation in stress–strain, pore pressure and effective stress path response of Sabarmati sand under the influence of mica (sand with 30% mica and pure sand) with MS and PS microstructure respectively. Effect of particle crushing on stress–strain and pore pressure response was also studied on Sabarmati sand with MS and PS microstructure. Distinctive macroscopic response was observed in Sabarmati sand with MS microstructure under the influence of mica as well as mica particle crushing.     

跨黏滑断层隧道纤维混凝土衬砌抗错断技术研究

为提高跨黏滑断层隧道的结构安全性和稳定性,以都汶高速友谊隧道F 1黏滑断层段为研究背景,通过采用纤维混凝土衬砌对跨黏滑断层隧道抗错断技术进行研究。结果表明:同体积纤维掺量条件下,混杂纤维混凝土(SBFRC)立方体抗压强度比纤维混凝土(SFRC)略低,SBFRC抗折强度比SFRC略高;断层黏滑错动对隧道上盘的影响大于下盘;纤维混凝土衬砌对下盘隧道结构的抗错效果优于上盘隧道,SFRC二衬平均抗错效果为12.22%,SBFRC二衬平均抗错效果为15.81%。研究成果可为黏滑断层隧道的结构设计及施工提供参考。     

互层胶结土中正断层地震地表破裂位错特征研究

为了解决采用Trimble GX 3D地面激光三维扫描仪分析互层胶结土中正断层地震地表破裂位错特征时,未有效模拟地表垂直和水平位移的基本特征,获取的地表破裂位错特征结果不准确的问题。提出新的互层胶结土中正断层地震地表破裂位错特征研究方法,先构建地震地表弹性位错模型,分析互层胶结土正断层的地表三维断裂特征,得到地表在受到走滑、逆冲和张开错动导致的地表错位变化情况;再通过正断层地震地表破裂离心机试验,获得互层胶结土中正断层地震地表破裂位错特征。试验结果说明,所提方法可有效分析互层胶结土中正断层地震地表破裂位错特征,且破裂点在土体模型中部和中下部的裂缝深度分别为22.4 m和33.4 m,裂缝上的破裂点处于土体模型的中下部时,裂缝的深度越深。     

以颗粒物理原理认识汶川M_W 7.9地震发生前临震预滑和震颤现象

发生在孕震区周边地块上的临震预滑和震颤现象,对破坏性地震预测有一定前兆意义,是值得地震学界关注的问题。选取2008年5月12日汶川M_W 7.9地震发生前,临夏和湟源地震台分量应变仪记录与临夏、恩施和西安地震台数字地震仪记录以及临夏和周至地震台深井水位仪记录,分析发现,在临震前数天至数小时,上述各地震台不同学科观测仪器均记录到一些"跃变"和"震颤"震相。文中试图以颗粒物理原理,来认识不同距离、不同台站、不同学科的观测仪器在临震前相近时间段内记录的低频和高频震相,可能是不同地块在临震前发生预滑错动后激发的预滑震相Xp和地下气体在裂隙内流动激发的震颤震相Tp。观测结果表明:2008年5月8日03时至主震发生,各地震台所处地块在相近时段内逐次发生次数不等的预滑错动,其中1—2次较大错动可在噪声背景中被识别;各地震台预滑错动方向指向或背向主震震中。据此认为:汶川M_W7.9地震前,上述各地震台所处地块在不同大小、不同方向的力链驱动下,发生指向或背向主震震中的临震预滑现象。