高原湖相泥炭土渗透特性研究及机制分析

为明确高原湖相泥炭土渗透特性并建立渗透模型,采用固结-渗透联合试验装置对取自6个场地20余组土样天然状态及一维压缩过程中渗透系数进行测定,并分析了加载时长、应力水平以及烧失量、残余纤维含量等因素对其渗透性的影响。试验结果表明：分别加载条件下,泥炭土渗透系数 随加载时长T增大而减小并趋于稳定,稳定时长在10 d左右;分级加载条件下, 随固结应力 的增大呈非线性减小, - 关系曲线为反S型;高原湖相泥炭土渗透模型可用e- 表示,其渗透指数 与初始孔隙比 满足关系式 0.25 ;初始渗透系数 和烧失量 、残余纤维含量 及 关系较为离散, 和 、 及初始含水率 有一定的正相关性。通过电镜扫描试验,从土中孔隙特征角度探讨了高原湖相泥炭土渗透特性的机制。     

运用H-k扫描和人工读取震相到时两种方法对比研究云南地区地壳结构

利用云南及其邻区59个宽频地震台站记录到的30°~100°远震资料,采用P波接收函数方法对云南地区的地壳厚度和地壳平均泊松比分布进行分析。研究结果显示:用H-k扫描和人工读取震相到时两种方法得到的云南地区地壳厚度和泊松比分布情况较为吻合。研究区域内Moho面埋深南浅北深,横向变化达30~40 km。在川滇菱形块体东南缘,地壳厚度等值线呈东南向舌状突出。泊松比呈块体分布特征,断裂两侧差异显著。高泊松比的分布主要集中在滇缅泰块体内和研究区域北部以及小江断裂附近,这与该区处于印度板块与欧亚板块碰撞俯冲前缘的特殊地理位置有关。     

金川铜镍硫化物样品中锇同位素比值的高精度分析

采用两种独立的190Os稀释剂、4个不同的化学流程,用等离子体质谱仪、TRITON热表面电离质谱仪和MAT-262固体质谱仪3种质谱仪器,在4个实验室分别对采自金川铜镍硫化物样品的187Os/188Os同位素比值进行分析,样品分析数量达到56个。4个实验室获得的结果分别为0.3356±0.0018(n=12,2s)、0.3363±0.0008(n=6,2s)、0.3363±0.0010(n=18,2s)和0.3353±0.0034(n=20,2s)。采用ISOPLOT软件对所得56个数据进行加权平均计算,得到187Os/188Os同位素比值为0.33602±0.00022(置信度95%)。两台TRITON热表面电离质谱仪测量的结果几乎完全一致,且精度高于MAT-262固体质谱仪和等离子体质谱仪。比较了碱熔和Carius管两种溶样方法,结果表明,对于所研究的样品,用Carius管溶矿方式可以将含锇矿物完全溶解。     

Trend analyses with river sediment rating curves

Sediment rating curves, which are fitted relationships between river discharge (Q) and suspended‐sediment concentration (C), are commonly used to assess patterns and trends in river water quality. In many of these studies, it is assumed that rating curves have a power‐law form (i.e. C = aQ^b, where a and b are fitted parameters). Two fundamental questions about the utility of these techniques are assessed in this paper: (i) how well to the parameters, a and b, characterize trends in the data, and (ii) are trends in rating curves diagnostic of changes to river water or sediment discharge? As noted in previous research, the offset parameter, a, is not an independent variable for most rivers but rather strongly dependent on b and Q. Here, it is shown that a is a poor metric for trends in the vertical offset of a rating curve, and a new parameter, â, as determined by the discharge‐normalized power function [C = â (Q/Q_GM)^b], where Q_GM is the geometric mean of the Q‐values sampled, provides a better characterization of trends. However, these techniques must be applied carefully, because curvature in the relationship between log(Q) and log(C), which exists for many rivers, can produce false trends in â and b. Also, it is shown that trends in â and b are not uniquely diagnostic of river water or sediment supply conditions. For example, an increase in â can be caused by an increase in sediment supply, a decrease in water supply or a combination of these conditions. Large changes in water and sediment supplies can occur without any change in the parameters, â and b. Thus, trend analyses using sediment rating curves must include additional assessments of the time‐dependent rates and trends of river water, sediment concentrations and sediment discharge. Published 2014. This article is a U.S. Government work and is in the public domain in the USA. Hydrological Processes published by John Wiley & Sons Ltd.     

基于HBV模型的淮河流域洪水致灾临界雨量研究

根据流域暴雨洪水致灾机制,文章提出了考虑前期基础水位的动态致灾临界雨量指标,并以淮河上游地区为例,基于HBV水文模型建立了降水-流量-水位关系,并根据这种关系确立了临界雨量确定的方法流程.首先基于历史水文数据率定和验证模型,得到适用于研究区的最优化模型参数,然后构建洪水上涨期水位流量关系,最后以是否达到致灾水位为标准,通过模型试算并结合水位流量关系曲线反推出致灾临界雨量值.在淮河上游地区的研究中,利用2002-2009年逐日气象水文数据对HBV模型进行了参数率定和检验,并针对洪水过程进行了参数优化,经过率定后HBV模型对王家坝以上流域具备较好的适用性,对典型洪水过程模拟的确定性系数和NASH效率系数均在0.8以上;根据王家坝站实测流量水位数据,构建了概化的单一关系曲线;结合HBV模型和水位流量关系得到了王家坝以上流域的动态致灾临界雨量指标,临界雨量值随前期基础水位升高而减小,并且随着前期水位的变化,临界雨量值呈现了明显的非线性响应特征.     

Temporal vP/vS variation characteristics in different zones of China’s Capital Circle area before and after Wen’an earthquake

On July 4, 2006, an earthquake of MS5.1 took place in Wen’an, Hebei Province, just at the south center of China’s Capital Circle area digital seismograph network. It is the strongest event recorded ever since the network went into operation in 2002. We processed the vast amounts of phase data yielded by the 107 digital seismic stations between 2002~2007 using Wadati method. In order to improve the precision and stability of shear and compressional wave velocities (vP/vS) calculation, we impose a number of restrictions on the computation environment and condition, e.g., the earthquakes are densely concentrated, selected stations are limited in range, the number of stations in- volved in the computation is larger than 5 and linear fitting features high precision and small error. Under these restrictions, the study shows that vP/vS in and around Wen’an and Tangshan underwent a normal-low-normal proc- ess one year before Wen’an earthquake, vP/vS became obviously low and the low ratio lasted for about one year, meanwhile, little variation of vP/vS was seen in Xingtai, northwest of Beijing, southwest of Beijing, Beijing-Tianjin and Beijing; after the quake, the vP/vS returned normal in Wen’an and Tangshan. Error and stability analysis of the calculated result for vP/vS shows it is convincible that anomaly appeared in and around Wen’an and Tangshan be- fore Wen’an earthquake.     

Influence of diversion angle on water and sediment flow into diversion channel

Accumulation of the sediment in the stream of the diversion channels adversely affects its operational systems.Diversion channels are often constructed perpendicular to the main river.In this study,the water flow and sediment transport in the diversion channel with different angles were investigated in an attempt to maximize water discharge and minimize sediment discharge.A physical model with movable bed was used to simulate water and sediment flow with five diversion angles(θ) between(30°-90°)...     

Annual estimates of water and solute export from 42 tributaries to the Yukon River

Annual export of 11 major and trace solutes for the Yukon River is found to be accurately determined based on summing 42 tributary contributions. These findings provide the first published estimates of tributary specific distribution of solutes within the Yukon River basin. First, we show that annual discharge of the Yukon River can be computed by summing calculated annual discharges from 42 tributaries. Annual discharge for the tributaries is calculated from the basin area and average annual precipitation over that area using a previously published regional regression equation. Based on tributary inputs, we estimate an average annual discharge for the Yukon River of 210 km³ year^–1. This value is within 1% of the average measured annual discharge at the U.S. Geological Survey gaging station near the river terminus at Pilot Station, AK, for water years 2001 through 2005. Next, annual loads for 11 solutes are determined by combining annual discharge with point measurements of solute concentrations in tributary river water. Based on the sum of solutes in tributary water, we find that the Yukon River discharges approximately 33 million metric tons of dissolved solids each year at Pilot Station. Discharged solutes are dominated by cations calcium and magnesium (5.65 × 10⁹ and 1.42 × 10⁹ g year^–1) and anions bicarbonate and sulphate (17.3 × 10⁹ and 5.40 × 10⁹ g year^–1). These loads compare well with loads calculated independently at the three continuous gaging stations along the Yukon River. These findings show how annual solute yields vary throughout a major subarctic river basin and that accurate estimates of total river export can be determined from calculated tributary contributions. Copyright © 2011. This article is a U.S. Government work and is in the public domain in the USA.     

Hydrologic simulation of clay‐settling areas in the phosphate mining district,Florida

Clay‐settling areas (CSAs) are one of the most conspicuous and development‐limiting landforms remaining after phosphate mining. Many questions are asked by the mining and regulatory communities with regard to the correct modelling (predictive) methods and assumptions that should be used to yield viable hydrologic post‐reclamation landforms within CSAs. Questions as to the correct methodology to use in modelling/predicting long‐term CSA hydrologic performance have historically been difficult to answer because the data and analysis to support popular hypotheses did not exist. The goal of this paper was to substantially improve the data, analysis and predictive methodology necessary to return CSAs to viable hydrologic units, and moreover, to develop better understanding of the hydrology of CSAs and their ability to support wetlands. The study site is located at the Fort Meade Mine in Polk County, Florida. In this paper, continuous model simulation and calibration of study site were conducted for the hydrologic model, Hydrological Simulation Program – FORTRAN, which was generally selected on the basis of its popularity in predicting the hydrologic behaviour of CSAs. The objective of this study was to simulate streamflow discharges and stage to estimate runoff response from these areas on the basis of the observed rainfall within the CSA. A set of global hydrologic parameters was selected and tested during the calibration by the parameter estimation software PEST. A comparison of the simulated and observed flow data indicates that the model calibration adequately reproduces the hydrologic response of the CSAs. The estimated parameters can be used as references for future application of the model. Copyright © 2012 John Wiley & Sons, Ltd.