Research on temporal and spatial distribution, evolutionary character and mechanism of crustal deformation field before and after the Tangshan earthquake

Ｒｅｓｅａｒｃｈｏｎｔｅｍｐｏｒａｌａｎｄｓｐａｔｉａｌｄｉｓｔｒｉｂｕ┐ｔｉｏｎ,ｅｖｏｌｕｔｉｏｎａｒｙｃｈａｒａｃｔｅｒａｎｄｍｅｃｈａｎｉｓｍｏｆｃｒｕｓｔａｌｄｅｆｏｒｍａｔｉｏｎｆｉｅｌｄｂｅｆｏｒｅａｎｄａｆｔｅｒｔｈｅＴａｎｇｓｈａｎ...     

Fracture analysis in the south-western Corinth rift (Greece) and implications on fault hydraulic behavior

This paper reviews the data concerning the fracture network and the hydraulic characteristics of faults in an active zone of the Gulf of Corinth. Pressure gap measured through fault planes shows that in this area the active normal faults (Aigion, Helike) act, at least temporarily and locally, as transversal seal. The analysis of the carbonate cements in the fractures on both the hangingwall and the footwall of the faults also suggests that they have acted as local seals during the whole fault zone evolution. However, the pressure and the characteristics of the water samples measured in the wells indicate that meteoric water circulates from the highest part of the relief to the coast, which means it goes through the fault zones. Field quantitative analysis and core studies from the AIG-10 well have been performed to define both regional and fault-related fracture networks. Then laboratory thin section observations have been done to recognize the different fault rocks characterizing the fault zone components. These two kinds of approach give information on the permeability characteristics of the fault zone. To synthesize the data, a schematic conceptual 3D fluid flow modeling has been performed taking into account fault zone permeability architecture, sedimentation, fluid flow, fault vertical offset and meteoric water influx, as well as compaction water flow. This modeling allows us to fit all the data with a model where the fault segments act as a seal whereas the relays between these segments allow for the regional flow from the Peloponnese topographic highs to the coast.     

CQK-50型车载化钻机的研制

在分析研究小型地质车载钻机的形式、功能与特点的基础上，提出了钻机车载化的新思路。根据地质调查工作现状，结合国内现有小型地质取样钻机，研制了CQK-50型全液压多功能车载取样钻机，并在野外物化探遥感异常验证钻探中取得了良好效果。     

我国地质找矿取心（样）钻探设备现状及提高效能的分析研究

概述了我国地质找矿钻探市场现状及前景，分析研究了地质取样钻探传统的立轴钻机及全液压动力头钻机的优缺点及综合效能，针对国家提出加强地质工作的形势及中国的实际状况，提出了完善和改进我国现有钻探设备、提高我国地质找矿取样钻探效率、降低能耗及成本的观点及建议。     

冲击凿岩钎杆的瞬态动力学分析

以ANSYS为平台，按照真实工作状态对凿岩钎杆进行了瞬态动力学分析，并对不同活塞形状下分析结果数据进行了比较，为冲击凿岩系统设计提供了理论依据。     

PDC钻头在寺河煤矿瓦斯预抽放钻井中的应用

在寺河矿区一期瓦斯地面预抽放钻井施工中，使用传统的镶齿三牙轮钻头钻进，钻进速度低，仅为2.0m／h，且井斜不易控制、钻头寿命短、成本较高。通过对寺河煤矿地层特征的分析，在二期工程施工中，9#煤以上地层优选六翼内凹式PDC钻头钻进，采取一定技术措施并合理调整钻压、转速及泵量等钻进参数，钻速可达7．0m/h，井斜也得到有效控制，降低了钻井成本。     

非等截面桩超声波成孔质量检测

分析了非等截面超声波成孔质量检测的几个主要影响因素,给出了相应得改进措施。用工程实例说明超声波反射技术是一种保证非等截面桩成孔质量和成桩质量必不可少的检测方法。     

襄樊汉江四桥大口径灌注桩成孔施工实践

介绍了使用泥浆护壁气举反循环回转钻进工艺进行襄樊汉江四桥大口径嵌岩桩的施工实践。施工中采用下置双护简隔离卵石层，合理选用钻头类型(卵砾石层采用五翼合金刮刀钻头，基岩采用球齿滚刀钻头)和钻进参数(混合器沉没深度，尾管长度，孔内空气流量与压力)，摸索与总结出一套复杂地层成孔施工经验。     

煤田勘查超千米深孔快速钻进技术探讨

针对目前国内煤田勘查主要机具及工艺技术方法存在的主要问题,结合煤田勘查地层地质条件和超千米深孔施工要求,研制了液压立轴式HTJ-2000型钻机和新型绳索取心钻具,并就配套设备选型、钻进工艺、钻进参数、泥浆指标及应用效果进行了阐述.该项技术的应用,已明显提高了钻效,使钻孔深度达到1 350m.     

磁铁石英岩型铁矿岩芯光谱编录研究

 对河北省昌黎县闫庄铁矿床的磁铁石英岩型铁矿石261件样品进行了光谱反射率测量，并与其铁含量进行了相关关系研究，目 的是对钻孔岩芯编录的新方法即高光谱岩芯编录在此类矿床中的可行性进行分析。研究结果表明，铁矿石反射率较低，一般为5%~20% ，铁离子的吸收峰主要表现在400~1 100 nm范围内，铁矿石中铁含量与850~900 nm的反射率均值呈现显著指数负相关关系，为高光谱 岩芯编录在此类矿床中的可行性提供了理论依据和技术途径。