地质导向技术在L型煤层气水平井 T-P05井中的应用

通过分析山西L型煤层气水平井的技术难点,着重建立造斜着陆与水平段导向两大导向模型,形成了以标志层划分与对比、地层倾角推算、地质建模和实时轨迹控制四个方面为主的L型煤层气水平井地质导向技术流程,该技术在T-P05井的成功应用,不仅丰富了煤层气水平井地质导向技术的内容与方法,更进一步验证了该技术在现场具有较强的可操作性和良好的应用前景,值得大力推广。     

A location-aware GIServices quality prediction model via collaborative filtering

The quality of GIServices (QoGIS) is an important consideration for services sharing and interoperation. However, QoGIS is a complex concept and difficult to be evaluated reasonably. Most of the current studies have focused on static and non-scalable evaluation methods but have ignored location sensitivity subsequently resulting in the inaccurate QoGIS values. For intensive geodata and computation, GIServices are more sensitive to the location factor than general services. This paper proposes a location-aware GIServices quality prediction model via collaborative filtering (LAGCF). The model uses a mixed CF method based on time zone feature from the perspectives of both user and GIServices. Time zone is taken as the location factor and mapped into the prediction process. A time zone-adjusted Pearson correlation coefficient algorithm was designed to measure the similarity between the GIServices and the target, helping to identify highly similar GIServices. By adopting a coefficient of confidence in the final generation phase, the value of the QoGIS most similar to the target services will play a dominant role in the comprehensive result. Two series of experiments on large-scale QoGIS data were implemented to verify the effectivity of LAGCF. The results showed that LAGCF can improve the accuracy of QoGIS prediction significantly.     

Novel fusion approach on automatic object extraction from spatial data: case study Worldview-2 and TOPO5000

The automatic extraction of information content from remotely sensed data is always challenging. We suggest a novel fusion approach to improve the extraction of this information from mono-satellite images. A Worldview-2 (WV-2) pan-sharpened image and a 1/5000-scaled topographic vector map (TOPO5000) were used as the sample data. Firstly, the buildings and roads were manually extracted from WV-2 to point out the maximum extractable information content. Subsequently, object-based automatic extractions were performed. After achieving two-dimensional results, a normalized digital surface model (nDSM) was generated from the underlying digital aerial photos of TOPO5000, and the automatic extraction was repeated by fusion with the nDSM to include individual object heights as an additional band for classification. The contribution was tested by precision, completeness and overall quality. Novel fusion technique increased the success of automatic extraction by 7% for the number of buildings and by 23% for the length of roads.     

PVDF管式超滤膜在低渗油田水处理中的研究及应用——以江苏台兴油田为例

根据低渗油田和特低渗油田的特点,研制出PVDF管式超滤膜,开展室内基础研究,并在江苏台兴油田进行中试和大规模的现场试验。经过处理后,水质标准达到油田回注水A1标准（SY／T5329-1994）,满足了低渗油田和特低渗油田的注水要求。     

多尺度带乘性噪声系统的最优状态平滑算法

针对多尺度带乘性噪声系统,在多尺度最优滤波融合的基础上,进行状态最优固定域平滑算法的研究.通过推广得到的平滑算法需要大量的局部传感器参数,而分布式多尺度滤波融合后不能保留这些信息.针对这一弊端对算法进行改进,推导出仅使用融合后的一步预测及滤波值的平滑算法.该算法在线性最小方差意义下是最优的.计算机仿真验证了算法的可行性.     

�������˲�ģ������Ӱ�����

???????????????????????????????????Kalman????????????????????????????????????????????????????????????в?????     

北斗GEO卫星载波相位单差观测值的周期性分析

高精度的卫星定位测量中,由于卫星在测站上空的重复周期性运动,周期性误差是影响测量精度的重要误差源。恒星日滤波利用周期性误差的特点,提取前一天的周期性误差来改正后一天的定位结果,可滤波处理诸如多路径误差。本文从北斗GEO卫星载波相位观测值站间单差的角度来探讨其周期性特点,通过前后两天站间相位单差观测值进行对比,采用相关性分析方法,验证北斗GEO卫星载波相位单差观测值的周期性特征。     

酉阳河流域典型年汛期的基流分割研究

基流分割是水文学研究中的重难点问题之一,目前基流分割也存在许多方法.基于酉阳河典型年汛期实测日平均流量资料,分别采用Chapman-Maxwell改进方程数字滤波法一次滤波(参数N=1)以及二次滤波(参数N=2)、BFI(f)法、HYSEP固定步长法、HYSEP滑动步长法、HYSEP局部最小值法进行基流分割并对其结果进...     

GPS变形监测动态数据处理中卡尔曼滤波的应用

介绍了卡尔曼滤波的基本原理,针对常规GPS变形监测数据处理中存在着不连续、非实时的缺点,结合卡尔曼滤波的特点,运用三峡实测数据对GPS变形监测动态数据处理中卡尔曼滤波的应用进行研究。并采用各点点位位移速度图对所建立的函数模型进行验证,同时对状态方程的建立及初始值的选取进行分析总结。     

扩展卡尔曼滤波与采样卡尔曼滤波性能比较

详细研究了卡尔曼滤波在非线性系统中的应用,在分析扩展卡尔曼滤波理论的基础上,指出了其在非线性系统应用中的缺陷,阐述了采样卡尔曼滤波(UKF)思想,通过事例和仿真说明了这种新型卡尔曼滤波理论的优越性能。