基于网络Voronoi图启发式和群智能的最大覆盖空间优化

提出一种基于网络Voronoi面域图的最大覆盖选址模型及相应的粒子群优化方法,并应用于城市响应时间敏感型公共服务设施的空间优化。本文考虑设施功能沿交通网络辐射以及需求非均匀分布情形,对设施在网络连续空间上进行布局优化,选址模型采用网络Voronoi面域图划分布局设施的功能辐射域,以启发空间优化最小化重叠覆盖。模型同时顾及了设施利用率的最大化,规定设施对给定距离以内的需求实行的完全服务覆盖和对给定距离以外的需求实行随距离衰减的部分服务覆盖。本研究提出基于遗传机制和广义Voronoi图改进的粒子群算法以提高其空间优化性能,通过对南京市消防站最大覆盖空间优化实验表明,该研究取得了较为理想的结果,可应用于城市化区域应急设施最大覆盖空间优化。     

Alteration Geochemistry of Volcanic Rocks around Sarcheshmeh Porphyry Copper Deposit,Rafsanjan, Kerman,Iran: Implications for Regional Exploration

To discriminate the mineral potentiality of the trachybasalt around the Miocene Sarcheshmeh porphyry copper deposit, petrogeochemical characteristics of more than 45 samples of the volcanic rocks were studied. Sarcheshmeh is one of the world's largest Miocene porphyry copper deposits in a continental arc setting and contains about 1200 million tonnes of ores with an average grade of 1.2 percent copper, 0.03 percent molybdenum, 3.9 g/t Ag and 0.11 g/t Au. The biotized and sericitized trachybasalts around the Sarcheshmeh deposit are associated with chalcopyrite, pyrite and molybdenite and and are enriched in Cu (>3108 ppm), K₂O (>4.2%), Rb (>155 ppm) and MgO (>2.9%), but depleted in yttrium (<11 ppm), MnO (<0.06%), CaO (<0.6%), Na₂O (<0.33%), Sr (<107 ppm), and Ba (<181 ppm). The propylitized trachybasalts are enriched in CaO (>9.1%), Na₂O (>3.2%), MnO (>0.24%), Y (>18.2 ppm), and Ba (>323 ppm). The results demonstrate that the diagrams of loss on ignition ? Cu, Cu ? Y, K₂O/K₂O + Na₂O + CaO ? Cu and Y ? MnO may be used as an exploration guide for undiscovered porphyry copper mineralization in the Central Iranian volcano—plutonic copper belt.     

Evolution of H2O content in a polymetamorphic terrane: the Plattengneiss Shear Zone (Koralpe, Austria)

The Koralpe of the Eastern European Alps experienced high-temperature/low-pressure metamorphism (∼650 °C and 6.5 kbar) during the Permian and eclogite facies metamorphism (∼700 °C and 14 kbar) during the Eo-Alpine (Cretaceous) metamorphic event. In the metapelitic Plattengneiss shear zone that constitutes much of the Koralpe, the second metamorphism caused only partial re-equilibration of the assemblages formed during the first metamorphism. It is shown here that the Eo-Alpine mineral assemblage, garnet + biotite + muscovite + plagioclase + quartz (with or without kyanite), formed under low water activity conditions that are consistent with the level of dehydration that occurred during the Permian event. This implies that the rocks were essentially closed-system from the peak of the Permian metamorphism through the Eo-Alpine event. The evolution of water content of the rocks is traced through time: that prograde dewatering during the Permian metamorphic event terminated at the metamorphic peak with a water content around 3–4 mol.%. The water content remained then constant and led to water-undersaturation during the subsequent Eo-Alpine metamorphism. From the water content and activity evolution a post-peak isothermal decompression path close to the solidus is inferred for the Eo-Alpine event.     

Thermochemistry of monazite-(La) and dissakisite-(La): implications for monazite and allanite stability in metapelites

Thermochemical properties have been either measured or estimated for synthetic monazite, LaPO₄, and dissakisite, CaLaMgAl₂(SiO₄)₃OH, the Mg-equivalent of allanite. A dissakisite formation enthalpy of ?6,976.5 ± 10.0 kJ mol^?1 was derived from high-temperature drop-solution measurements in lead borate at 975 K. A third-law entropy value of 104.9 ± 1.6 J mol^?1 K^?1 was retrieved from low-temperature heat capacity (C _p) measured on synthetic LaPO₄ with an adiabatic calorimeter in the 30–300 K range. The C _p values of lanthanum phases were measured in the 143–723 K range by differential scanning calorimetry. In this study, La(OH)₃ appeared as suitable for drop solution in lead borate and represents an attractive alternative to La₂O₃. Pseudo-sections were calculated with the THERIAK-DOMINO software using the thermochemical data retrieved here for a simplified metapelitic composition (La = ∑REE + Y) and considering monazite and Fe-free epidotes along the dissakisite-clinozoïsite join, as the only REE-bearing minerals. Calculation shows a stability window for dissakisite-clinozoïsite epidotes (T between 250 and 550°C and P between 1 and 16 kbar), included in a wide monazite field. The P–T extension of this stability window depends on the bulk-rock Ca-content. Assuming that synthetic LaPO₄ and dissakisite-(La) are good analogues of natural monazite and allanite, these results are consistent with the REE-mineralogy sequence observed in metapelites, where (1) monazite is found to be stable below 250°C, (2) around 250–450°C, depending on the pressure, allanite forms at the expense of monazite and (3) towards amphibolite conditions, monazite reappears at the expense of allanite.     

Plate tectonic settings for Precambrian basic rocks from Brazil by multidimensional tectonomagmatic discrimination diagrams and their limitations

Multidimensional discrimination diagrams (2006–2011) for basic and ultrabasic igneous rocks were applied to Precambrian rock suites from the Amazonian and São Francisco cratons, and the Tocantins Province, Brazil, to infer their possible tectonic settings. The chosen study cases in the Amazonian craton include the ca. 3.0 Ga metabasalts of the Identidade greenstone belt, 1.87–1.80 Ga Parauapebas anorogenic basalt-rhyolite dikes, 1.86–1.82 Ga Rio Branco anorogenic gabbro-basalt association, ca. 1.76–1.74 Ga Aripuanã and Teles Pires intracratonic basalt-felsic volcanic associations, and 1.76–1.74 Ga Jamari and 1.60–1.53 Ga Serra da Providência arc-related gabbroic rocks. In the São Francisco craton, we selected 1.48 Ga arc-related amphibolites of the Rio Capim greenstone belt, continental mafic dikes of Uauá (2.6 Ga), Curaçá and Chapada Diamantina (1.5 Ga), and Espinhaço (ca. 1.0 Ga). In the Tocantins Province, ca. 3.0 Ga komatiites associated with oceanic basalts of the Crixás and Guarinos greenstone belts were studied. The application of the diagrams generally provided consistent results with the authors’ proposed tectonic settings based on field relationships and geochemical data. The exceptions are some within-plate (continental) mafic dikes and basalts for which our diagrams do not work well. For comparison, we also used two ternary and two bivariate traditional discrimination diagrams for the data from the Amazonian craton, whose results were poorer than the newer multidimensional diagrams.     

Sustainable groundwater management of the stressed Coastal aquifer in the Gaza region

Abstract

This study proposes an empirical approach that can lead to the sustainable management of groundwater resources. This approach enables a comprehensive understanding of an aquifer, delineates distinct hydrological scenarios, and recommends a set of operational activities for each sub-region of the aquifer. The paper focuses on the Coastal aquifer of the Gaza Strip region which has been divided into three sub-regions. The southern sub-region (WSW) is classified as scenario “+a2”, which indicates that it can be used as a multi-annual groundwater reservoir. The northern sub-region (NW-E) is designated scenario “-a2”, where the recommended operational measures include injection of freshwater in wells and cleaning of the surface environment. The third sub-region (CSE), is classified as scenario “-b2”, which requires severe management measures to correct both a negative hydrological and environmental situation. The approach also involves on-going monitoring of the aquifer, and can be considered as an empirical tool to provide preliminary guidelines for long-term groundwater management.     

Application of 50 multi-dimensional discrimination diagrams and significance tests: deciphering compositional similarities and differences between Hawaiian and Icelandic volcanism

As an innovative approach, I use multi-dimensional diagrams presented by our group during 2004–2013 and respective probability estimates for the newer diagrams to evaluate similarities and differences between the same magma types (subalkaline basalt, basic magma other than subalkaline basalt, and intermediate magma) from the Hawaiian Islands and Iceland. The known ocean island setting of the Hawaiian Islands was reproduced from these 50 multi-dimensional diagrams for basic, intermediate, and acid magmas. The possible influence of the mid-ocean ridge system on Icelandic magmas was also confirmed from the diagrams for basic rocks. Evaluating magma compositional similarities and differences between the Hawaiian Islands and Iceland was complemented by the application of significance tests. Statistical inferences for the chemical elements and, more importantly, their log-ratios, successfully explained the similarities and differences in the tectonic settings for these two regions.     

San Diego trough geotechnical test area

Abstract

The San Diego Trough Geotechnical Test Area, located about 24 km southwest of San Diego in a water depth of about 1.2 km, lies near the base of the Coronado Escarpment directly north of the Coronado Fan. A new bathymetric map delineates a shallow basin in the soft, highly plastic, clayey silts flooring the Test Area. Measurements of shear strength by vane and static cone pene‐trometer, and bulk density by nuclear densitometer, were made in place from the submersible Deep Quest. Sixteen short (< 1.6 m) gravity cores were collected from ships.

The geotechnical properties show little areal variation and generally change uniformly with depth within the 55 km² Test Area. Silt is the predominant grain size, averaging about 62%. In‐place bulk density shows little change with increasing depth, values range from 1.23 to 1.26 Mg/m³; laboratory density values increase with depth, ranging from 1.30 to 1.52 Mg/m³ between the surface and a depth of about 1.1 m. The difference between the in place and laboratory values may indicate sampling densification of the cored sediment. Water content in the cores decreases uniformly within the range of 249 to 43% dry weight. Shear strength increases linearly with depth. The laboratory shear strength values are lower than the in place values, which range from 4 kPa at the surface to about 29 kPa at a depth of 3.27 m. Predictor equations relate Atterberg limits, bulk density, water content, and laboratory and in place shear strength to depth. Sedimentation‐compression e log p curves have an equivalent compression index of 1.5 to nearly 2. Excluding rurbidite layers and sampling disturbance effects, all cores indicate a uniform depositional environment in the surface to 1.6 m of sediment sampled. The geotechnical properties indicate that the sediments in the west central and southwest parts of the Test Area exhibit vertical heterogeneity due to thin silt‐sand layers, presumably of turbidity current origin, that originated from the Coronado Canyon.     

广义反射-透射系数算法的无量纲化

水平层状介质中瑞利波频散曲线的计算一直是受关注的问题.陈晓非提出的广义反射-透射系数方法虽然具备很好的精确性和稳定性,但是算法中起决定作用的矩阵E存在有量纲元素,并且不同元素之间的数量级差异很大.本文作者通过把广义反射-透射系数算法无量纲化,得到了简洁的瑞利波频散函数的公式体系.分别计算了改进后算法和原算法中矩阵E的最大模元素与最小模元素的比值ε,发现前者的矩阵E中最大模元素与最小模元素最多只相差1个数量级,而后者的矩阵E中最大模元素与最小模元素之间最大达11个数量级的差异,尽管后者可以通过选取变量的单位减小ε的值,但新算法精度更高,从而完善了利用广义反射-透射系数方法求解瑞利波频散曲线问题的理论和算法.     

Thermodynamical constraints on the crystallization of a deep magma-ocean on Earth

It has been argued that the crystallization of the magma ocean (MO) after the Moon-forming impact led to the formation of a basal magma ocean (BMO). We search which primordial conditions of pressure, temperature and chemical composition could be compatible with such scenario, based on thermodynamical constraints. The major requirement is an early formation of a viscous layer (VL) of mantle material (i.e. bridgmanite (Bg)) at mid lower-mantle depth, which could insulate thermally and chemically the BMO from the rest of the mantle. To produce such VL, Bg grains should be: (i) neutrally buoyant at mid lower-mantle depths, (ii) sufficiently abundant to produce an efficient insulating layer, and (iii) aggregated to the boundary layer from above and below. The first and the second require a large amount of MO crystallization, up to more than 45%, even in the most favorable case of all Fe partitioning into the melt. The latter is very questionable because the Bg grains have a very small settling velocity. We also investigate different scenarios of MO crystallization to provide constraints on the resulting core temperature. Starting from a fully molten Earth, a temperature as high as ～4725 K could be found at the core–mantle boundary (CMB), if the Bg grains settle early atop the CMB. Such a basal layer of Bg can efficiently decouple from each other the cooling rates of the core and the mantle above the VL. If the settling velocity of Bg grains is too low and/or the MO is too turbulent, such basal VL may not form. In this case, the CMB temperature after MO solidification should stabilize at ～4350 K. At this temperature, enough Bg grains are crystallized to make the mushy mantle viscous at any mantle depth.