尽快建立煤炭地质单位信用管理制度

煤炭地质单位尚未建立有效地信用管理制度，威胁了煤炭地质经济的持续健康发展。煤炭地质单位领导要高度重视信用管理，尽快设立专门的信用管理机构，规范内部管理，防范经营风险。     

神堂沟地热田形成与地质构造的关系

地热田的形成往往与地质构造有着千丝万缕的联系，神堂沟即是如此。笔者从地温场及水化学场的演变出发，揭示了地质构造F1断层、Fa边山断裂带及冶峪向斜的控温作用，它们共同贡献形成的集水“凹槽”是热水田存在的主导因素，而上覆第四系黄土盖层的保温隔热性能为其提供了保证，使神堂沟地热田在众多的边山断裂热水点中脱颖而出。     

冲积层防水煤柱上提工作面的防治水对策

开滦矿区煤系地层上覆由于防水煤柱留设过大，造成了大量的煤炭储量呆滞。为了提高煤炭资源回收率，确保安全生产，开滦林南仓矿在西二采区进行了工作面采后的导高观测试验研究，测量导水裂隙带岩层的漏失情况，为提高开采上限提供了地质依据，防水煤柱由原来的65m缩小到53m，成功地在1221上工作面进行了试验开采。     

高产高效综放工作面顶板水综合防治

通 过 对 T2195工 作 面 顶板 涌 水 水 质化 验 、周 边 开 采 情 况 的 综 合 分 析 认 为:T2195工 作 面 涌 水 以 5煤 层 顶 板 水为 主,地面 注 浆水 只是 起 了间 接补 给 作用 。为 此提 出 继续 进行 地 面注 浆、进一 步 完善 井下 排 水系 统等 有 针对 性的 防 治水 措施 ,确 保 工作 面的 高 产高 效。     

21世纪中国地质灾害防治形势与减灾战略思考

文章论述了21世纪中国地质灾害减灾面临的形势是既存在许多有利条件又存在多方面困难而面临严重挑战。提出21世纪地质灾害减灾战略：1．建立地质灾害防治安全维护体系；2．优先安排西部地区地质灾害防治工程，实施地质灾害风险管理；3．建立矿山地质灾害防治监督管理体系；4．城市地质灾害防治与土地利用相结合；5．加强我国地质环境监测与网站建设；6．针对地质灾害区域分布规律，采取分区减灾对策；7．加大地质灾害防治投入力度。     

大汶河流域洪灾的成因及防治对策

阐述了大汶河流域洪涝灾害的特点,并对洪涝灾害发生的原因进行了分析,提出了预防为主、综合治理、系统防治和重点防治相结合、标本兼治的防治思路及具体防治对策.     

大同市(平原区)地下水超采现状及治理措施

通过分析大同市平原区地下水超采现状,指出地下水超采容易引起的水环境问题,针对日益紧张的水资源供需矛盾和地下水起采引起的水环境问题,提出了超采区的治理措施.     

Sedimentary environment and development controls of the hydrocarbon source beds:Middle and Upper Proterozoic in northern North China

Problem on development control of marine source bed hold in Chinese petroleum industry progression. The Hongshuizhuang Formation,Tieling Formation and Xiamaling Formation in the Middle and Upper Proterozoic are important hydrocarbon source beds in northern North China, and investigation of their sedimentary environments and the controls has great significance for petroleum exploration in North China. Based on sedimentology (sequence stratigraphy), palaeoecology, sedimentary geochemistry, and sedimentary palaeogeography, their development pattern is discussed. All these studies indicate that the development controls of the hydrocarbon source beds include a favorite palaeogeographic location, exceeding propagation of biomes in low and middle latitudes, anoxic environments, enrichment of phosphorus element and the adsorption of clay minerals during the preservation of organic matter in the marine carbonates.     

Frequency domain modal analysis of earthquake input energy to highly damped passive control structures

A new complex modal analysis‐based method is developed in the frequency domain for efficient computation of the earthquake input energy to a highly damped linear elastic passive control structure. The input energy to the structure during an earthquake is an important measure of seismic demand. Because of generality and applicability to non‐linear structures, the earthquake input energy has usually been computed in the time domain. It is shown here that the formulation of the earthquake input energy in the frequency domain is essential for deriving a bound on the earthquake input energy for a class of ground motions and for understanding the robustness of passively controlled structures to disturbances with various frequency contents. From the viewpoint of computational efficiency, a modal analysis‐based method is developed. The importance of overdamped modes in the energy computation of specific non‐proportionally damped models is demonstrated by comparing the energy transfer functions and the displacement transfer functions. Through numerical examinations for four recorded ground motions, it is shown that the modal analysis‐based method in the frequency domain is very efficient in the computation of the earthquake input energy. Copyright © 2004 John Wiley & Sons, Ltd.     

Optimal design of viscoelastic dampers using eigenvalue assignment

In this study a procedure for determining the optimum size and location of viscoelastic dampers is proposed using the eigenvalue assignment technique. Natural frequencies and modal damping ratios, required to realize a given target response, are determined first by the convex model. Then the desired dynamic structural properties are realized by optimally distributing the damping and stiffness coefficients of viscoelastic dampers using non‐linear programming based on the gradient of eigenvalues. This optimization method provides information on the optimal location as well as the magnitude of the damper parameters. The proposed procedure is applied to the retrofit of a 10‐story shear frame, and to a three‐dimensional structure with an asymmetric plan. The analysis results confirm that the responses of model structures retrofitted by the proposed method correspond well with the given target response. Copyright © 2003 John Wiley & Sons, Ltd.