Estimates of heat flow and heat production and a thermal model of the São Francisco craton

An updated analysis of geothermal data from the highland area of eastern Brazil has been carried out and the characteristics of regional variations in geothermal gradients and heat flow examined. The database employed includes results of geothermal measurements at 45 localities. The results indicate that the Salvador craton and the adjacent metamorphic fold belts northeastern parts of the study area are characterized by geothermal gradients in the range of 6–17°C/km. The estimated heat flow values fall in the range of 28–53 mW/m², with low values in the cratonic area relative to the fold belts. On the other hand, the São Francisco craton and the intracratonic São Francisco sedimentary basin in the southwestern parts are characterized by relatively higher gradient values, in the range of 14–42°C/km, with the corresponding heat flow values falling in the range of 36–89 mW/m². Maps of regional variations indicate that high heat flow anomaly in the São Francisco craton is limited to areas of sedimentary cover, to the west of the Espinhaço mountain belt. Crustal thermal models have been developed to examine the implications of the observed intracratonic variations in heat flow. The thermal models take into consideration variation of thermal conductivity with temperature as well as change of radiogenic heat generation with depth. Vertical distributions of seismic velocities were used in obtaining estimates of radiogenic heat production in crustal layers. Crustal temperatures are calculated based on a procedure that makes simultaneous use of the Kirchoff and Generalized Integral Transforms, providing thereby analytical solutions in 2D and 3D geometry. The results point to temperature variations of up to 300°C at the Moho depth, between the northern Salvador and southern São Francisco cratons. There are indications that differences in rheological properties, related to thermal field, are responsible for the contrasting styles of deformation patterns in the adjacent metamorphic fold belts.     

Comparison of numerical models of two debris flows in the Cortina d’ Ampezzo area,Dolomites, Italy

The accurate prediction of runout distances, velocities and the knowledge of flow rheology can reduce the casualties and property damage produced by debris flows, providing a means to delineate hazard areas, to estimate hazard intensities for input into risk studies and to provide parameters for the design of protective measures. The application of most of models that describe the propagation and deposition of debris flow requires detailed topography, rheological and hydrological data that are not always available for the debris-flow hazard delineation and estimation. In the Cortina d’Ampezzo area, Eastern Dolomites, Italy, most of the slope instabilities are represented by debris flows; 325 debris-flow prone watersheds have been mapped in the geomorphological hazard map of this area. We compared the results of simulations of two well-documented debris flows in the Cortina d’Ampezzo area, carried on with two different single-phase, non-Newtonian models, the one-dimensional DAN-W and the two-dimensional FLO-2D, to test the possibility to simulate the dynamic behaviour of a debris flow with a model using a limited range of input parameters. FLO-2D model creates a more accurate representation of the hazard area in terms of flooded area, but the results in terms of runout distances and deposits thickness are similar to DAN-W results. Using DAN-W, the most appropriate rheology to describe the debris-flow behaviour is the Voellmy model. When detailed topographical, rheological and hydrological data are not available, DAN-W, which requires less detailed data, is a valuable tool to predict debris-flow hazard. Parameters obtained through back-analysis with both models can be applied to predict hazard in other areas characterized by similar geology, morphology and climate.     

数字地质调查中多源地学数据在造山带构造单元 划分和大地构造演化研究方面的应用 ——以青海民和地区为例

多源地学数据包括遥感、地球化学和地球物理数据,介绍了利用多源地学数据进行造山带构造单元划分的方法。遥感数据在确定区域构造边界及活动断层方面的应用非常广泛,遥感影像在解译线形构造即断层方面有非常明显的效果,可以根据不同构造单元的影像差异,区分不同的地质体、线性构造及活动断层,同时用遥感数据叠加三维地形数据分析线性构造可以更加直观地解译线性构造。地球化学数据在确定大的构造边界方面具有一定的指示意义,可以根据水系沉积物的地球化学特点,运用因子分析方法确定大的构造边界。地球物理数据提供的是地质体及构造边界在深部的延伸情况,可以为研究断裂的运动学和动力学特征提供证据。     

中国数字地质调查系统的基本构架 及其核心技术的实现

数字地质调查系统是贯穿整个地质矿产资源调查全过程的软件,涵盖地质矿产调查、矿产资源勘查、矿体模拟、品住估计、资源量估算、矿山开采系统优化等内容。考虑数字地质调查系统的应用技术层面,从数据“层”模型、数据流“池”技术、不同阶段数据模型继承技术、数据互操作技术等几个方面讨论了核心技术及其实现,通过基于无缝一体化技术的数据采集、管理、综合处理与成果表达,在实体或矿块的矿床建模技术与品住估计、储量估算等方面展现了全地质调查过程的数字化,不但为地质人员应用高新技术降低了门坎,而且极大地提高了研究精度和效率,丰富了成果的表现形式和服务形式。随着数字地质调查系统的完善和应用水平的提高,数字地质调查系统将成为中国地质调查的主流软件体系。     

测井仪器的故障分析与排除思路

TYSC-3Q与PSJ-2型数字测井仪是目前煤田测井中常用的二种测井仪器,在使用过程中难免发生诸如测井控制故障、声速探管故障、密度三侧向探管故障、井温、井液电阻率探管故障、电法面板故障、数字测井面板故障、电测井故障等常见故障类型。通过对各类故障因素进行剖析,指出了故障易发生的部位,并详细的介绍了检查的方法及故障的排除步骤。     

南京市首级高程控制网的建立及跨江水准的研究

本文首先介绍了南京市首级高程控制网的概况,接着重点讨论了跨江水准测量方法的选择,并全面分析了测距三角高程法影响精度的三个因素,结合南京市首级高程控制网全面介绍了数据处理的有关问题。     

我国煤炭航测技术的最新发展

中国煤炭地质总局航测遥感局作为我国煤炭航测技术的主要单位,承担着95％以上的煤炭矿区航测成图任务,并逐步发展成为我国集航空摄影、遥感地质、地图制印、地下管线探测、地理信息技术等全面发展的空间信息产业集团：伴随着计算机技术的发展,煤炭航测技术走过了从模拟测图到解析测图,最后发展到今天的全数字测图的历程。目前煤航已拥有和掌握了IMU／DGPS辅助航空摄影技术、SAR（合成孔径雷达）成图技术、LIDAR（机载激光扫描）技术等空间数据采集最新技术。     

(ϖμ/ϖT) P of the lower mantle

We estimate (/T) _P of the lower mantle at seismic frequencies using two distinct approaches by combining ambient laboratory measurements on lower mantle minerals with seismic data. In the first approach, an upper bound is estimated for |(/T) _P | by comparing the shear modulus () profile of PREM with laboratory room-temperature data of extrapolated to high pressures. The second approach employs a seismic tomography constraint ( lnV _S / lnV _P ) _P =1.8–2, which directly relates (/T) _P with (K _S /T) _P . An average (K _S /T) _P can be obtained by comparing the well-established room-temperature compression data for lower mantle minerals with theK _S profile of PREM along several possible adiabats. Both (K _S /T) and (/T) depend on silicon content [or (Mg+Fe)/Sil of the model. For various compositions, the two approaches predict rather distinct (/T) _P vs. (K _S /T) _P curves, which intersect at a composition similar to pyrolite with (/T) _P =–0.02 to –0.035 and (K _S /T) _P =–0.015 to –0.020 GPa/K. The pure perovskite model, on the other hand, yields grossly inconsistent results using the two approaches. We conclude that both vertical and lateral variations in seismic velocities are consistent with variation due to pressure, temperature, and phase transformations of a uniform composition. Additional physical properties of a pyrolite lower mantle are further predicted. Lateral temperature variations are predicted to be about 100–250 K, and the ratio of ( lnp/ lnV _S ) _P around 0.13 and 0.26. All of these parameters increase slightly with depth if the ratio of ( lnV _S / lnV _P ) _P remains constant throughout the lower mantle. These predicted values are in excellent agreement with geodynamic analyses, in which the ratios ( ln / lnV _S ) _P and ( / lnV _S ) _P are free parameters arbitrarily adjusted to fit the tomography and geoid data.     

Overbreak and underbreak in underground openings Part 2: causes and implications

Summary The newly developed light sectioning method has been used to investigate some of the causes and costs of overbreak and underbreak. Investigations at the Aquamilpa Hydroelectric Project in Mexico have shown decreased overbreak and increased underbreak as a result of increased rock quality and decreased explosive energy. A new measure of explosive energy, the perimeter powder factor (PPF), has been defined and shown to be useful in the context of tunnel-wall rock damage. Tentative results indicate that explosive energy (PPF) may be a more important factor in producing underbreak, whereas rock quality may be a greater factor in producing overbreak. A site-specific equation is given for predicting overbreak or underbreak as a function of rock quality and explosive energy, with an evaluation of the cost of underbreak and overbreak.     

Textural segmentation of digital rock images into bedding units using texture energy and cluster labels

The texture of digital rock images, as recorded, for instance, with borehole imaging devices, is shown to reflect different bedding types. Textural segmentation of borehole images, therefore, subdivides the recorded sequence into bedding units. We show that a textural segmentation algorithm based on the concept of texture energy achieves good results when compared with synthetic as well as real data in which petroleum geologists have performed zonations on cores. Texture energy involves filtering of the original image with a set of texture sensitive masks. The filtering is done as a finite convolution over the size of the masks. On the resulting images the variance is computed over a relatively large sliding window, which, in its practical implementation, covers the full width of the image. The resulting nine one-dimensional curves are then clustered hierarchically into a user-determined number of image texture or lithological bedding classes. Principal component analysis previous to clustering can be used to reduce redundancy in the data. A recurring and relatively ill-defined problem in this field are macro-textures, i.e., the cyclic interbedding of two or more bedding types. We show that sliding Fourier transforms and variable mask scale can successfully address the zonation of macro-textures. In general, the method gives best results with mask sizes equivalent to 2–4 centimeters, reflecting the length scale at which the investigated geological bedding seems to have its highest variation.