新型金刚石造斜钻头的研制及改进

简述了配合连续造斜器使用的金刚石造斜钻头的设计方案,利用有限元软件对其水力结构进行优化。设计的新型金刚石造斜钻头经现场使用效果良好,但内径磨损严重,后经中心部位优化改进,大大改善了中心磨损问题,钻头综合性能得到了大幅提高。     

栾川县多金属矿复杂地层岩心钻探技术

栾川县多金属成矿区处于马超营大断裂带中,区内4条大断裂横贯全区,主、次级构造极为发育。因碎裂蚀变带、泥质砂砾岩等松散破碎地层而引发的孔内坍塌、取心困难等钻进难题此起彼伏,软硬互层变化频繁,对钻头要求高、选择性强。而且钻孔结构复杂,生产效率难提高,多数钻孔施工中均出现程度不同的夹钻、埋钻、断钻、烧钻等孔内事故,给钻探施工带来很大困难。通过改善冲洗液性能、采用JS122绳索取心钻具,并进行钻头与地层适应性研究,取得了较好成效。     

金刚石-cBN-硬质合金复合柱齿的理论分析

通过多种分析手段对所研制的金刚石-立方氮化硼(cBN) -硬质合金超硬复合柱齿进行了深入的研究分析, 得出了由于B的烧结促进和强化作用、Ni-P的活化烧结作用以及cBN加入, 大大提高了超硬复合柱齿的性能, 同时还分析指出, 在金刚石与基体合金之间存在过渡区, 该过渡区能有效地保护金刚石免受高温损伤, 另外, 该过渡区还大大增强了基体与金刚石之间的结合强度.      

关于薄壁金刚石钻头胎体性能的探讨

对薄壁金刚石钻头胎体进行了性能分析和配方设计探讨，尤其根据被钻切介质对钻头胎体性能的要求作了较详细的分析，从理论分析结合实践经验筛选出了钻切建筑石材和各种钢筋砼的钻头胎体配方，在生产中满足了钻头工作条件的要求。     

电镀金刚石钻头镀层与钢体结合强度研究

采用直接剪切试验,研究了稀土添加量、镀液pH值和电流密度对结合强度的影响;并结合试样断口的扫描电镜分析结果,对镀层的破坏形式进行了讨论.     

金刚石界面金属碳化物过渡层强度的研究 (金刚石焊接机理研究之二)

通过对试样进行强度测试后，在高倍电镜和能谱仪上对金刚石界面金属面碳化物的微观结构和含量的观察，分析，测量其表面金属碳化物面积，计算出不同添加剂所生成的金属碳化物在不同浓度和粒度的金刚石中所生成强度的排序，从而确定不同金属碳化物及其物理力学性能的差异，为金刚石制品的生产与开发提供理论依据。     

自润滑孕镶金刚石钻头胎体材料初步研究

为了研究具有自润滑性能的孕镶金刚石钻头胎体材料,进行了在胎体配方中添加石墨的研究。对胎体材料的抗弯强度、硬度、耐磨性和材料与白刚玉砂轮组成摩擦副时的摩擦系数进行了测定,并用扫描电子显微镜观察了磨损表面形貌。实验结果表明,添加石墨后,胎体材料的硬度和抗弯强度下降,与60目白刚玉砂轮组成摩擦副时的摩擦系数下降,耐磨性则随着石墨含量的增多先增强,后下降（超过6％后）。形貌分析表明,不含石墨的胎体材料在磨损中发生明显的塑性变形;添加石墨后,胎体材料的塑性降低,出现犁沟和剥落现象。     

Mineral inclusions and geochemical characteristics of microdiamonds from the DO27, A154, A21, A418, DO18, DD17 and Ranch Lake kimberlites at Lac de Gras, Slave Craton, Canada

A mineral inclusion, carbon isotope, nitrogen content, nitrogen aggregation state and morphological study of 576 microdiamonds from the DO27, A154, A21, A418, DO18, DD17 and Ranch Lake kimberlites at Lac de Gras, Slave Craton, was conducted. Mineral inclusion data show the diamonds are largely eclogitic (64%), followed by peridotitic (25%) and ultradeep (11%). The paragenetic abundances are similar to macrodiamonds from the DO27 kimberlite (Davies, R.M., Griffin, W.L., O'Reilly, S.Y., 1999. Diamonds from the deep: pipe DO27, Slave craton, Canada. In: Gurney, J.J., Gurney, J.L., Pascoe, M.D., Richardson, S.H. (Eds.), The J. B. Dawson Vol., Proc. 7th Internat. Kimberlite Conf., Red Roof Designs, Cape Town, pp. 148–155) but differ to diamonds from nearby kimberlites at Ekati (e.g., Lithos (2004); Tappert, R., Stachel, T., Harris, J.W., Brey, G.P., 2004. Mineral Inclusions in Diamonds from the Panda Kimberlite, S. P., Canada. 8th International Kimberlite Conference, extended abstracts) and Snap Lake to the south (Dokl. Earth Sci. 380 (7) (2001) 806), that are dominated by peridotitic stones.

Eclogitic diamonds with variable inclusion compositions and temperatures of formation (1040–1300 °C) crystallised at variable lithospheric depths sometimes in changing chemical environments. A large range to very ¹³C-depleted C-isotope compositions (δ¹³C=−35.8‰ to −2.2‰) and an NMORB bulk composition, calculated from trace elements in garnet and clinopyroxene inclusions, are consistent with an origin from subducted oceanic crust and sediments. Carbon isotopes in the peridotitic diamonds have mantle compositions (δ¹³C mode −4.0‰). Mineral inclusion compositions are largely harzburgitic. Variable temperatures of formation (garnet T_Ni=800–1300 °C) suggest the peridotitic diamonds originate from the shallow ultra-depleted and deeper less depleted layers of the central Slave lithosphere. Carbon isotopes (δ¹³C av.=−5.1‰) and mineral inclusions in the ultradeep diamonds suggest they formed in peridotitic mantle (670 km). The diamonds may have been entrained in a plume and subcreted to the base of the central Slave lithosphere.

Poorly aggregated nitrogen (IaA without platelets) in a large number of eclogitic (67%) and peridotitic (32%) diamonds, with similar nitrogen contents, indicates the diamonds were stored in the mantle at low temperatures (1060–<1100 °C) following crystallisation in the Archean. Type IaA diamonds have largely cubo-octahedral growth forms, and Type II and Type IaAB diamonds, with higher nitrogen aggregation states, mostly have octahedral morphologies. However, no correlation between these groups and their mineral inclusion compositions, C-isotopes, and N-contents rules out the possibility of unique source origins and suggests eclogitic and peridotitic diamonds experienced variable mantle thermal states. Variation in mineral inclusion chemistries in single diamonds, possible overgrowths of ¹³C-depleted eclogitic diamond on diamonds with peridotitic and ultradeep inclusions, and Type I ultradeep diamond with low N-aggregation is consistent with diamond growth over time in changing chemical environments.     

多年冻土地区金刚石矿的环境问题--以Yakutia 西北部Anabar矿为例

Placer diamond mining in the Anabar area involves various operations that cause long-term (nearly a quarter of a century) environmental impacts. The long history of mining activities, the technology used to mine the placers, as well as the poor assimilative capacity of the natural systems can result in serious environmental impacts in the area. The primary geochemical processes in the diamond-bearing area are affected by the occurrence of permafrost and relict ice, the lengthy duration of ice cover in water bodies, and the widespread development of cryogenic processes. This promotes physical migration of contaminants, cryogenic metamorphization of waters, and long-term accumulation of organic contaminants in low-temperature, reduction and sedimentation barriers. In this paper, some environmental and geochemical effects of diamond mining in the Arctic area are discussed.     

“松科二井”用硬岩长寿命钻头的设计与应用

为提高“松科二井”在深井硬岩钻进中的寿命与效率,选用了高性能胎体材料、高强度焊接材料,并采用了合理的钻头结构与水路结构设计,研制的φ216/124 mm金刚石取心钻头在“松科二井”取得了良好的效果,本文介绍了适用于深井硬岩的金刚石钻头的设计及应用效果。