小动力旋挖钻机用嵌岩短螺旋钻头结构形式的改进

采用小动力无加压旋挖钻机在粒径较大的卵砾石地层和泥页岩地层中进行1500 mm以上大口径钻孔灌注桩施工，由于钻机动力小且不能加压，用常规嵌岩短螺旋钻头钻进出现进尺慢或不进尺现象。通过对河南西峡县宛西制药责任有限公司新厂房桩孔施工过程中出现此种现象的分析和处理，提出了嵌岩短螺旋钻头针对性的改进措施，并取得了良好效果。     

新型充气钻井液在新疆严重漏失地层的应用

利用特殊植物纤维KWS作为泥浆处理剂的新型充气钻井液，不仅具有常规充气钻井液低密度、排粉能力强、节约用水等优点，还可以不受钠、钙离子的影响，提高钻井泡沫稳定性和钻井液抗盐能力。通过采用此种新型充气钻井液，利用其低密度特性、特殊泥饼、泡沫的群体封堵作用和泡沫的疏水屏蔽作用，成功解决了裂隙地层的漏失问题，恢复了钻探生产。在我国西部干旱缺水漏失地区具有良好的应用前景。     

液体高膨胀材料充填堵漏试验应用

介绍了钻探施工中，利用膨胀材料充填、堵漏的新工艺，其具有经济、高效、安全的特点。     

鄂北工区钻头型号及钻井参数的优化

通过对近年来鄂北工区所施工井的钻井资料进行分析、对比，优选出了适合于各区块、各井段的钻头型号和钻井参数，提高了机械钻速，缩短了钻井周期，使鄂北工区的钻井技术上了一个新的台阶，加速了鄂北气田的建设。     

关于薄壁金刚石钻头胎体性能的探讨

对薄壁金刚石钻头胎体进行了性能分析和配方设计探讨，尤其根据被钻切介质对钻头胎体性能的要求作了较详细的分析，从理论分析结合实践经验筛选出了钻切建筑石材和各种钢筋砼的钻头胎体配方，在生产中满足了钻头工作条件的要求。     

对我国金刚石钻头胎体经典配方的理论优化和建议

选取合理可信的约束条件对我国经典的63号金刚石钻头胎体配方进行了优化验证，获得理论认识，并依此对已有成熟配方的改进提出了建议。     

Numerical simulation of percussive drilling

This paper presents a novel dynamical model to analyze the long‐term response of a percussive drilling system. This departs from existing approaches that usually consider a single activation and bit/rock interaction cycle for the analysis of the process performance. The proposed model integrates the axial dynamics of an elastic piston and an elastic drill bit, a motion‐dependent pressure law to drive the piston, and a generalized bit/rock interaction law representative of the dynamic indentation taking place at the bit/rock interface. It applies to down‐the‐hole percussive drilling as well as top‐hole, with minor modifications. The model does not account for the angular motion or the hole cleaning, however. The model is first formulated mathematically; then, a finite‐dimensional approximation is proposed for computations. Numerical analyses of the model response, for a low‐size down‐the‐hole percussive system, follow. The period‐1 stationary response for the reference configuration is studied in detail, and parametric analyses assessing the influence on the rate of penetration of the bit/rock interaction parameters, the feed force, and the percussive activation parameters are conducted. These analyses reveal that the multiscale nature of the process is well captured by the model and recover expected trends for the influence of the parameters. They also suggest that a significant increase of the penetration rate can be achieved by increasing the percussive frequency. Copyright © 2015 John Wiley & Sons, Ltd.     

Diamond in metasedimentary crustal rocks from Pohorje,Eastern Alps: a window to deep continental subduction

We report the first finding of diamond and moissanite in metasedimentary crustal rocks of Pohorje Mountains (Slovenia) in the Austroalpine ultrahigh‐pressure (UHP) metamorphic terrane of the Eastern Alps. Microscopic observations and Raman spectroscopy show that diamond occurs in situ as inclusions in garnet, being heterogeneously distributed. Under the optical microscope, diamond‐bearing inclusions are of cuboidal to rounded shape and of pinkish, yellow to brownish colour. The Raman spectra of the investigated diamond show a sharp, first order peak of sp³‐bonded carbon, in most cases centred between 1332 and 1330 cm^?1, with a full width at half maximum between 3 and 5 cm^?1. Several spectra show Raman bands typical for disordered graphitic (sp²‐bonded) carbon. Detailed observations show that diamond occurs either as a monomineralic, single‐crystal inclusion or it is associated with SiC (moissanite), CO₂ and CH₄ in polyphase inclusions_. This rare record of diamond occurring with moissanite as fluid‐inclusion daughter minerals implies the crystallization of diamond and moissanite from a supercritical fluid at reducing conditions. Thermodynamic modelling suggests that diamond‐bearing gneisses attained P–T conditions of ≥3.5 GPa and 800–850 °C, similar to eclogites and garnet peridotites. We argue that diamond formed when carbonaceous sediment underwent UHP metamorphism at mantle depth exceeding 100 km during continental subduction in the Late Cretaceous (c. 95–92 Ma). The finding of diamond confirms UHP metamorphism in the Pohorje Mountains, the most deeply subducted part of Austroalpine units.     

EXPLORATION ENGINEERING

正20141864 Deng Mengchun(Institute of Exploration Technology,CAGS,Chengdu 611734,China);Huang Shenghui Rock Sample Collection and Division Technologies for Air Reverse Circulation Sampling Drilling(Exploration Engineering,ISSN1672-7428,CN11-5063/TD,40(7),2013,p.73-76,80,16 illus.,5 refs.)     

松辽盆地大陆科钻二开段大井眼钻井液技术

CCSD-SK2井是一口钻穿松辽盆地白垩纪陆相沉积地层的中国大陆科学钻探井。二开段先以216mm口径钻至2806.20m,然后进行444.5mm口径扩孔。泥页岩地层大井眼钻进过程中粘土矿物含量高且易造浆,砂砾岩层渗透性强易粘卡,井壁稳定控制与钻屑携带难度大。选用了钾铵聚合物钻井液体系和聚磺钻井液体系,通过正交实验确定了钻井液配方。将钻井液控制在合适的密度、较低的失水量以及较强的封堵性,有效实现了井壁稳定;保持适当的环空返速、较高的动塑比以及定期打稠塞举砂等措施,有效实现了井眼净化。1086.45m~1147.56m与1182.74m~1256.01m井段累计收获岩心130.90m,取心率达到97.41%,平均机械钻速为0.84m/h;最终顺利钻至2806.20m。