油铀兼探的找矿思路在松辽盆地的应用——以中央拗陷区南部为例

以"油铀兼探"的找矿思路,带动松辽盆地中南部开展砂岩型铀矿调查选区及钻探验证工作.将异常强度250 API和450 API确定为划分潜在铀矿孔、潜在铀矿化孔和正常孔的关键技术指标,对中央拗陷区南部1572个钻孔进行异常筛查工作.排查发现潜在铀矿孔362个,潜在铀矿化孔223个.对191号钻孔和36号钻孔进行钻探验证,发现1个工业孔、1个异常孔.认为区内寻找砂岩型铀矿的有利地段为油田区反转构造形成的隆起区边部四方台组河流相砂体,并总结了中央拗陷区南部6种主要控矿因素.     

Main technical innovations of Songke Well No.2 Drilling Project

Songke Well No.2, one of the main part of the scientific drilling project in Songliao Basin, which was drilled 7018 m and acquired the part of cores continuously from the Low Cretaceous to the Carboniferous and the Permian from the 2843 m deep, can be considered as the deepest continental drilling project in Asia. Aiming at the features of longer well sections, larger diameters and multiple spud-ins for coring of Songke Well No.2, this project broke through the “coring in small diameter and reaming in large diameter” spud-in drilling-completion procedures which are always used in large-diameter-well coring for continental scientific drilling projects in domestic and overseas and the drilling method of short-single-cylinder roundtrip footage. At the same time, “coring in the same diameter and completing drilling at one single diameter” was achieved at all φ311 mm and φ216 mm coring sections of more than one thousand meters long, high-efficient operation with “drilling long footage with drill tools combined in multi-cylinders” was achieved at deep coring section. Four world drilling records were created which include more than a thousand meters continuous coring at φ311 mm, and the footage per roundtrip footage at φ311 mm, φ216 mm and φ152 mm is all more than 30 m, all of these breakthroughs reduced at least 300 days for this project; moreover, considering the characteristics of formations that the geothermal gradient is high in the drilled sections and the inside-well temperature is over 240°C after drilling completion, a formate-polymer water-based mud system was developed by compounding attapulgite and sodium bentonite and by adding independently developed high-temperature stabilizer, which can provide critical technical support for successful well completion at 7018 m in the super-high-temperature environment It is the first time that the water-based mud is operated at the working temperature higher than 240°C in China; Besides, considering the high-quality requirement on cores imposed by the project, the method “mechanical cored is charge” to discharge core nondestructively on the ground was worked out, and more than 4000 m scatheless cores were discharged out of the drill pipes while maintaining original stratum structures.     

5 000 m深部干热岩钻井方案的技术经济评价

介绍了美国芬顿山和法国苏茨深部干热岩的典型钻井技术方案,并根据我国干热岩钻井基础和地质成藏条件,从钻井深度、井身结构、钻进工艺和钻机设备等方面制定了3种不同的干热岩钻井技术方案,给出了具体技术指标数值。通过计算,对每种方案进行了技术经济评价,结果认为: 大直径钻井方案是技术可靠、经济可行的5 000 m干热岩钻探施工方案。     

西藏雅鲁藏布江缝合带中段日喀则地幔橄榄岩中发现金刚石等异常矿物

本文报道了雅鲁藏布江缝合带中段日喀则蛇绿岩地幔橄榄岩中发现与该带东西段蛇绿岩岩体中相似的金刚石和特殊地幔矿物群。日喀则地幔橄榄岩体以方辉橄榄岩为主,含少量二辉橄榄岩和纯橄岩,辉石岩和辉长岩呈脉状产在方辉橄榄岩中。通过重砂分选实验,在465kg的方辉橄榄岩大样中发现了30余种特殊矿物群,包括金刚石、自然金、自然铬、自然铜等自然元素矿物类;碳硅石等碳化物类;方铁矿、赤铁矿、磁铁矿、刚玉、铬尖晶石、金红石、锡石、黑钨矿等氧化物类;镍黄铁矿、方铅矿、辉钼矿、辉锑矿、闪锌矿、毒砂等硫化物类;Ag-Au等合金矿物类;橄榄石、辉石、锆石等硅酸盐岩类;白钨矿等钨酸盐岩类;萤石等氟化物类。金刚石和自然金、自然铬、自然铜连同碳硅石的发现表明岩体存在强还原环境,这套特殊矿物组合指示日喀则地幔橄榄岩可能与雅鲁藏布缝合带其他蛇绿岩一样,经历了深地幔演化过程。     

贵州省复杂地层地热深井钻探工艺

贵州省地矿局组织实施了“贵州省地热深井钻探技术攻关”项目,研究了喀斯特地区复杂地层情况下地热深井钻探中螺杆钻井工艺和空气钻井工艺的适应性,攻克了两种工艺在该地区应用受地层特性限制的相关技术难题。螺杆马达平均寿命达到200小时以上,螺杆钻井工艺较常规钻井工艺钻进机械钻速提高2～3倍;空气潜孔锤单井应用深度超过1500m,空气潜孔锤钻井工艺较常规钻井工艺机械钻速提高10～29.5倍。同时研究了单井多工艺转换接力钻进技术,以及与上述工艺配套使用的钻井液体系。最终形成了一套适合贵州省地质条件地热深井钻探施工并能显著提高钻井效率和经济效益的组合工艺技术体系。该成果能将1口2000m以上地热深井施工周期由原来的8~12个月缩短至4~6个月,将单井平均施工成本由450万元降低至410万元以下。     

铺前—清澜断裂西支晚更新世活动特征

海域浅层地震探测调查表明,铺前—清澜断裂向北西海域方向延伸,断裂走向NW-SE,倾向SW,为高倾角的正断层;在地震剖面上,断裂断错了第四系地层;进一步应用钻探技术对铺前—清澜断裂进行探测研究,结合层序地层学、岩性岩相分析与年代测定等方法建立了钻孔联合剖面,揭示断层性质为正断层,倾向SW,断距4.0 m,断层的最新活动时代为晚更新世,第四纪表现为张性活动,断裂的平均垂直速率为0.15 mm/a。     

冰层空气反循环快速钻进方法及冰屑运移研究

空气反循环钻进技术具有钻速快、能耗低、可不提钻连续取心取样、能有效避免积雪层漏失等优点,在冰层钻探中极具应用潜力。本文针对冰层钻探技术特点,提出了双壁钻杆式、双通道高压胶管式和寄生高压胶管式等三种空气反循环冰层钻探技术,分别介绍了其工作原理及特点。基于气力输送和气体钻井基本理论,对冰屑颗粒气体介质中的悬浮速度进行了分析,建立了单颗粒冰屑悬浮、运移方程和冰屑颗粒群悬浮方程,并设计了冰屑悬浮实验台,对冰屑悬浮所需的风速进行了实验测试。理论计算值与实验实测值吻合较好,最大误差约10.91%,可用本文建立的冰屑运动方程来计算实际钻进时携带冰屑所需的风量,为后续在极地实施冰层空气反循环钻进技术提供了依据。     

六种成膜封堵剂的室内实验优选与评价

为更好地服务深部钻探工程,准确了解冲洗液封堵性能,对6种成膜封堵剂开展了砂床实验、API静失水量实验、流变性能实验及抗温实验等室内实验进行优选与评价。实验结果表明,2号和4号成膜封堵剂在6种成膜封堵剂中封堵性能最好,它们在基浆中的最优加量均为2%,100 ℃温度条件下加入这2种封堵剂的冲洗液具有较好的抗温性能;冲洗液中膨润土含量和处理剂是影响冲洗液封堵性能的2个重要因素：膨润土含量越高,冲洗液封堵性能越好,加入聚合物、降滤失剂等处理剂可以提高冲洗液的封堵性能。砂床实验是评价冲洗液封堵性能好坏的重要依据。     

KT178型取心钻具在共和干热岩钻井中的应用

共和干热岩资源富集于花岗岩地层,硬度高,研磨性强,部分层段裂隙发育,取心困难。针对干热岩地层和取心需求特点,研制一套KT178取心钻具,并配套设计了孕镶金刚石取心钻头。该钻具为单动双管取心钻具,可配套井底动力钻具使用,设计中注重对钻具外管、卡簧等关键部件的强度校核。在GH-01井和GH-02井中,经过两轮实验和优化,钻具逐渐成熟,获取了较完整的岩心样本,满足干热岩勘探取心要求,具备了向页岩气、水资源勘察等具有间断取心需求的同类工程推广应用的条件。     

青藏高原复杂地层地质钻探低固相冲洗液试验研究

青藏高原由于地质条件的多样性,分布有松散破碎地层、高应力地层、断层破碎带等复杂地层,在地质钻探中经常遇到塌孔、漏浆、缩径、卡钻、埋钻等问题。同时配套使用的冲洗液形成的泥皮质量差、胶结能力较差、携岩粉能力较弱等不足。冲洗液的性能是实现复杂地层顺利钻进的关键。结合青藏高原复杂地层的地质特点,研发了低固相聚合物新型冲洗液,该冲洗液以钠质膨润土和微泡剂等外加剂为基础,具有流动性好、胶结性强、降失水量适中的特点,适宜在青藏高原复杂地层地质钻探中使用。