Influence of Structural Non-Stationarity of Surface Roughness on Morphological Characterization and Mechanical Deformation of Rock Joints

Summary Structural non-stationarity of surface roughness affects accurate morphological characterization as well as mechanical behaviour of rock joints at the laboratory scale using samples with a size below the stationarity threshold. In this paper, the effect of structural non-stationarity of surface roughness is investigated by studying the scale dependence of surface roughness and mechanical behaviour of rock joints. The results show that the structural non-stationarity mainly affects the accurate characterization of the surface roughness of the fracture samples. It also controls the amount and location of the contact areas during shear tests, which in turn affects the mechanical properties and asperity degradation of the samples. It is concluded that for accurate determination of the morphological and mechanical properties of rock joints at laboratory and field scales, samples with size equal to or larger than the stationarity threshold are required. Author’s address: Nader Fardin, Rock Mechanics Group, Department of Mining Engineering, Faculty of Engineering, University of Tehran, P.O. Box: 11365/4563, Tehran, Iran     

Soil erosion susceptibility assessment and validation using a geostatistical multivariate approach: a test in Southern Sicily

A certain number of studies have been carried out in recent years that aim at developing and applying a model capable of assessing water erosion of soil. Some of these have tried to quantitatively evaluate the volumes of soil loss, while others have focused their efforts on the recognition of the areas most prone to water erosion processes. This article presents the results of a research whose objective was that of evaluating water erosion susceptibility in a Sicilian watershed: the Naro river basin. A geomorphological study was carried out to recognize the water erosion landforms and define a set of parameters expressing both the intensity of hydraulic forces and the resistance of rocks/soils. The landforms were mapped and classified according to the dominant process in landsurfaces affected by diffuse or linear water erosion. A GIS layer was obtained by combining six determining factors (bedrock lithology, land use, soil texture, plan curvature, stream power index and slope-length factor) in unique conditions units. A geostatistical multivariate approach was applied by analysing the relationships between the spatial distributions of the erosion landforms and the unique condition units. Particularly, the density of eroded area for each combination of determining factors has been calculated: such function corresponds, in fact, to the conditional probability of erosion landforms to develop, under the same geoenvironmental conditions. In light of the obtained results, a general geomorphologic model for water erosion in the Naro river basin can be depicted: cultivated areas in clayey slopes, having fine-medium soil texture, are the most prone to be eroded; linear or diffuse water erosion processes dominate where the topography is favourable to a convergent or divergent runoff, respectively. For each of the two erosion process types, a susceptibility map was produced and submitted to a validation procedure based on a spatial random partition strategy. Both the success of the validation procedure of the susceptibility models and the geomorphological coherence of the relationships between factors and process that such models suggest, confirm the reliability of the method and the goodness of the predictions.     

Effect of Inter-Column Spacing on Soil Stresses due to Vibro-Installed Stone Columns: Interesting Findings

This paper reveals the interesting relation between the inter-column spacing and the corresponding alteration of soil state of stresses due to the vibro-installation technique. This relation is inferred from analyses for load settlement records of various field load tests, performed for stone columns arrangements with different inter-column spacing values. In order to have adequate confidence in the findings, a well-documented case history, involving three columns patterns along with their relevant field and laboratory test results, is utilized for this study. Moreover, a well-tested finite element model, capable of simulating both elasto-plastic and time dependent soil deformations as well as pore water pressure building and dissipation, is employed in the analysis. Instead of determining the soil response to the test load, based on known initial soil stresses and material properties, the analysis is inversely posed to determine the soil initial stresses, based on the recorded settlements and the post-installation material properties. The alteration in the soil state of stress is represented by the increase in the post-installation horizontal to vertical stress ratio, K*, as a function of the inter-column spacing. It is found that this alteration experiences a systematic decrease in its magnitude as the inter-column spacing increases.     

Analysis of the 2003 Varunawat Landslide,Uttarkashi, India using Earth Observation data

Mass movements such as landslides in mountainous terrains are natural degradation processes and one of the most important landscape-building factors. Varunawat Parbat overlooking Uttarkashi town witnessed a series of landslides on 23 September 2003 and the debris slides and rock falls continued for 2 weeks. This landslide complex was triggered due to the incessant rainfall prior to the event, and its occurrence led to the blockage of the pilgrim route to Gangotri (source of the Ganges river) and evacuation of thousands of people to safer places. Though there was no loss of lives due to timely evacuation, heavy losses to the property were reported. High-resolution stereoscopic earth observation data were acquired after the incidence to study the landslide in detail with emphasis on the cause of the landslide and mode of failure. Areas along the road and below the Varunawat foothill region are mapped for landslide risk. It was found that the foothill region of the Varunawat Parbat was highly disturbed by man-made activities and houses are dangerously located below steep slopes. The potential zones for landslides along with the existing active and old landslides are mapped. These areas are critical and their treatment with priority is required in order to minimise further landslide occurrences.     

气候变化对塔里木河来自天山的地表径流影响

塔里木河水资源主要来自天山南坡两条源流,选择西段阿克苏河和中段开都河-孔雀河作为研究区.1956-2003年研究河源山区气温呈持续升温且降水波动增加的趋势,其中1995-2003年升温强劲,升温速率高出48 a期间平均的3倍以上;降水自1986年后持续增加,20世纪90年代较80年代增幅达18%,并显示出河源山区湿岛向塔里木盆地扩展.因高山缺少气象观测,出山径流过程变化可以综合反映中高山带的气候变化.塔里木河来自天山的地表径流在1986-2003年间持续增长,以冰川融水补给为主的库玛拉克河,1994年以来年径流量增加已在前期平均值基础上提升了一个台阶;开都河以降水径流补给为主,1986-2002年出现了观测记录以来的丰水期,并使1986年后博斯腾湖水位快速上升,恢复到1958年记录的最高水位以上.两河年径流变化趋势基本相似,但也显示有西、中段的气候变化局部差异,出现丰枯水期的不一致;然而,在近16 a升温过程中,年径流增长幅度和快慢相近.     

江苏潮滩沉积物激光粒度仪与移液管-筛析分析结果的对比

激光粒度仪的广泛应用带来了与历史数据的对比问题,因此需要建立激光粒度仪与早期分析结果之间的关系。根据江苏海岸潮滩沉积物样品的激光粒度仪和移液管-筛析法分析,对粒度参数、粒度组分等进行了对比,对两种方法的差异进行了分析。结果表明,对于江苏潮滩沉积物粒度参数中平均粒径的激光粒度仪与移液管-筛析分析结果之间有良好的线性关系;筛分法测得的粗颗粒物质较激光法偏少,而移液管法法测得的细颗粒物质较激光法偏多;将样品分类之后再进行两种方法所获粒度参数的回归分析,相关性得以提高,说明不同粒度组成的沉积物对分析结果的对比有不同的影响。两种方法之间的换算关系不仅与研究区域有关,而且与沉积物本身的粒度组成有关。     

华北克拉通北缘隆化地区S型花岗岩的独居石年龄图谱

位于华北克拉通北缘中段的隆化S型花岗岩由石榴石黑云母花岗岩、石榴石花岗岩以及片麻理化的黑云母花岗岩组成。其主体岩性石榴石黑云母花岗岩SiO_2和Al_2O_3含量分别为64.09%～69.6%以及14.6%～16.13%,K_2O/Na_2O>1.0,A/CNK>1,0,Mg~#在20.76～34.89之间变化,具有明显的Nb、Ta、P、Ti和Sr亏损以及Rb、K和Th富集。石榴石黑云母花岗岩(样品JB6031-1)采用独居石电子探针U-Th-Pb化学法进行测年,获得了2553±120Ma、2180±42Ma和1854±24Ma三个年龄峰值。一颗独居石内部成分分带上6个分析点定年结果构成2553±120Ma的峰值年龄,这一年龄与我们最新获得的2506±7Ma和2541±8Ma(继承锆石年龄)LA-ICP-MS锆石U-Pb同位素年龄相似,我们将这一独居石年龄解释为继承独居石的年龄,表明在赤城-隆化断裂以北存在太古宙陆块,并且在后期构造-热事件中发生部分熔融形成S型花岗岩。该独居石颗粒幔部成分分带上10个分析点的测年结果揭示的峰值年龄为2181±42Ma,该年龄也是出现频率最高的年龄值,我们建议2181±42Ma为S型花岗岩的结晶年龄,反映了S型花岗岩的侵位时代。独居石颗粒外部成分分带上8个分析点的测年结果构成1854±24Ma的峰值年龄,该年龄与华北克拉通中部带的变质年龄接近,我们将其解释为S型花岗岩的变质年龄,表明华北克拉通北缘的构造演化与中部带的构造演化密切相关。     

柴达木盆地北缘侏罗系两类不同有机质丰度泥岩的 生物标志物特征对比研究

在柴达木盆地北缘地区,分别选取有机碳含量很低和较高的侏罗系泥岩样品,对比分析了它们在生物标志物组成上的差异。结果发现,高有机质丰度泥岩的生标组成与我国西北地区侏罗纪煤系有机质的特征差异不大,相比而言,低有机质丰度泥岩的正烷烃以前主峰为特征,Pr/Ph比值在1.0左右,三环萜烷和伽马蜡烷丰度较高,并在部分样品中检出了25 降藿烷系列。结合泥岩的有机岩石学特征,认为这些差异可能反映了泥岩沉积环境和生烃母质的不同:高有机质丰度泥岩的有机显微组分以相对弱还原条件下的形态有机质为主,包括藻类体、孢子体和角质体等,而低有机质丰度泥岩的有机显微组分以相对强还原条件下的矿物沥青基质为主,其母质可能来源于低等显微菌藻类。进一步通过对比不同有机质丰度泥岩,以及区内原油生标组成之间的相互关系,讨论了研究区的油源问题。     

四川大陆槽稀土矿床碳酸岩-英碱正长岩锆石U-Pb年代学和Hf同位素性质及其地质意义

川西冕宁-德昌稀土成矿带是中国最重要的稀土成矿带之一,所有稀土矿床均与碳酸岩-正长岩杂岩体有关.前人研究表明,牦牛坪、木落寨和里庄碳酸岩-碱性杂岩体成岩年龄与其相应矿床的成矿年龄基本一致,而大陆槽正长岩年龄与REE矿床的成矿年龄相差甚远.本文对大陆槽碳酸岩、英碱正长岩进行了SHRIMP U-Pb锆石年代学和LA-MC-ICPMS锆石Hf同位素原位测量,它们的形成年龄分别为12.99±0.94Ma、14.53±0.31Ma,表明两者是同时形成的,且与其成矿年龄基本一致.碳酸岩和正长岩的εHf(t)值、Hf模式年龄与它们的εNd(t)值、Nd模式年龄所展现出来的特征一致,说明在其形成过程中有地壳物质的加入.     

中祁连东段什川杂岩基的岩石化学特征及年代学研究

祁连造山带被托菜南山-了高山构造带及宗务隆山-贵得构造带分为北祁连、中祁连及南祁连构造带。什川岩基位于中祁连构造带东部,由闪长岩、斜长花岗岩、二长花岗岩组成;对二长花岗岩进行U-Pb单颗粒锆石微区LA-ICP-MS同位素测定,获得444.6Ma及414.3Ma两组加权平均年龄,前者代表岩石的形成年龄,后者代表构造热事件年龄。二长花岗岩主量元素W(SiO_2)=68.66%～80.77%,w(K_2O)/w(Na_2O)>1和A/CNK介于0.95～1.21间,总体为钾质钙碱性过铝质花岗岩。岩石富集LILE元素(K、Th、Rb、Ba等),亏损HFSE元素(Ta、Nb、Y等);稀土元素总量较高(∑REE多介于109.05×10~(-6)～322.66×10~(-6)),轻重稀土强烈分馏(∑LREE/∑HREE介于7.92～31.68),稀土元素分配模式为轻稀土富集型,具中等-强Eu负异常(δEu=0.26～0.58)。岩石矿物组合及岩石地球化学特征共同表明,什川岩基为中上地壳泥砂质岩石部分熔融而成,形成温度较低,为加厚地壳拆沉熔融成因。这为祁连造山带构造演化及其深部动力学机制研究提供了新的资料。