Lower-crustal rifting in the Rukwa Graben, East Africa

An M_w 5.9 earthquake occurred in the Lake Rukwa rift, Tanzania, on 1994 August 18, and was well recorded by 20 broad-band seismic stations at distances of 160 to 800 km and 21 broad-band stations at teleseismic distances. The regional and teleseismic waveforms have been used to investigate the source characteristics of the main shock, and also to locate aftershocks that occurred within three weeks of the main shock. Teleseismic body-wave modelling yields the following source parameters for the main shock: source depth of 25 ± 2 km, a normal fault orientation, with a horizontal tension axis striking NE-SW and an almost vertical pressure axis (Nodal Plane I: strike 126°–142°, dip 63°–66°, and rake 280°–290°; Nodal Plane II: strike 273°–289°, dip 28°–31°, and rake 235°–245°), a scalar moment of 4.1 times 10¹⁷ N m, and a 2 s impulsive source time function. Four of the largest aftershocks also nucleated at depths of 25 km, as deduced from regional sPmp–Pmp times. The nodal planes are broadly consistent with the orientation of both the Lupa and Ufipa faults, which bound the Rukwa rift to the northeast and southwest, respectively. The rupture radius of the main shock, assuming a circular fault, is estimated to be 4 km with a corresponding stress drop of 6.5 MPa. Published estimates of crustal thickness beneath the Rukwa rift indicate that the foci of the main shock and aftershocks lie at least 10 km above the Moho. The presence of lower-crustal seismicity beneath the Rukwa rift suggests that the pre-rift thermal structure of the rifted crust has not been strongly modified by the rifting, at least to depths of 25 km.     

The Darwin Rise demise: the western Pacific guyot heights trace the trans-Pacific Mendocino fracture zone

The Darwin Rise has been proposed so many times and in so many forms and places that the time has come to make a more comprehensive examination of the region. Lying on the NW Pacific Plate between the Geisha Guyots, the Mid-Pacific Mountains, the equator, and the trenches, the region is roughly bounded by magnetic anomaly M20 (147 Ma). It was subjected to a massive outpouring of lava about 105 to 120 Ma, which created the guyots and seamounts in that region. Guyots are excellent tools for studying events of long ago because they eroded in the same lowstand in the Cretaceous and guyot relief, therefore, is a surrogate for paleo-sealevel. The relief is derived by subtracting the break depth of the summit plateau of a guyot from the regional depth. Guyot relief would necessarily be less in the center than to the periphery if the feature formed on a pre-existing rise, as has been postulated. The existence of a paleo-Darwin Rise would give concentric contours for the region in question. Of the sixty guyots used in this study, thirty-seven of these guyots were surveyed using SASS multibeam in the Marcus-Wake seamount group. Twenty-three guyots were surveyed using random track single-beam sonar surveys. An entirely different scenario is shown. Data revealed a major fracture passing through the area coevally or after the guyots formed. Because the depths to the summit are not the same now, vertical tectonics occurred after subaerial erosion. This means the fracture formed during and after the erosion (roughly 105 Ma) and influenced the normal sequence of events in guyot formation. Depending on how one deciphers trends through the Hess Rise morass, SASS bathymetry shows a continuation of the Surveyor/Mendocino fracture zone swarm inside the M20 region to the NE of these data. The fracture swarm continues to the western Pacific trench system. Based on this information, if the Darwin Rise ever existed, it had to have done so elsewhere.     

测氡法快速确定油气田边界及深度

本介绍了运用测氡法快速确定大庆××油气田边界，估算其埋藏深度试验，结果表明，该方法具有可行性和实用性。由于所做工作有限，尚属经验性探讨，还必须从理论和实践上进一步地工作，进而充实、完善它。     

秦岭巴山地区高陵─达县重磁剖面初步解释

高陵－达县剖面位于秦岭中段，斜跨中朝准地台、秦岭褶皱系、扬子准地台三大构造单元。在研究剖面实磁场特征的基础上，综合地质、物性、省内及邻省深部物探资料，建立了剖面地质－地球物理模型，依此对剖面通过地段的地壳结构、断裂带深部特征、三大构造单元的深部格架进行了解释推断。     

天山地震活动区的深部构造特征

以地壳介质的Ｐ波速度分布和导电性为基础，描述了天山地区几个主要地震活动区域深部构造特征，地震大都发生在地壳内不同速度块体之间的过渡带附近；沿着天山的南缘和毗邻塔里木盆地的西昆仑、阿尔金等山前地带，壳内高导层由北向南、由东向西逐渐加深并增厚，它们与所在地区震源深度的分相相吻合。这种不稳定的地壳结构有长期受力情况下非常容易发生形变甚至破裂而引发地震。     

茅台酒酿酒高梁的地质环境研究

茅台酒对酿酒高梁有严格要求，适于茅台酒传统酿造工艺的高梁只产于仁怀县的某些地区，主要是受地质环境的控制。仁怀高梁对某些常量和微量元素有着鲜明的选择性，对磷和钼表现出强烈的吸收作用。岩－土剖面元素的迁聚，对磷和铝的供应是确定仁怀高梁品质和产量的关键。侏罗系砂泥岩、二叠系煤系地层的岩－土剖面，元素淋溶微弱，总量丰富，有效态含量高，组合良好，能正常进行岩－土－高梁系统的物质转化与元素迁移，能充分供应高梁生长所需的磷和钼等元素，是茅台酒酿酒高梁的最宜种植区。     

A model study on the decay of volcanic aerosol layer and verification with Pinatubo and El Chichon data

The time evolution of stratospheric aerosol layer formed after a volcanic eruption is studied taking into account the aerosol microphysical processes of growth, coagulation and sedimentation. Using a simple model we could explain the observed evolution of the Pinatubo volcanic layer which decayed in about 3 years. The experimental data obtained by Nd:YAG backscatter lidar over Ahmedabad further supports this finding. The data obtained after the El Chichon volcanic eruption also showed that the El Chichon aerosol layer decayed in about 3 years time. Thus, though the amount of SO₂ injected has been higher, in the case of Pinatubo, about two to three times more than El Chichon, it has resulted in the production of larger aerosol particles due to faster growth and coagulation processes, and subsequently a faster removal rate, to give more or less a similar background aerosol amount at the stratosphere in about 3 years time.     

The identifiability of parameters in a water quality model of the Biebrza River, Poland

The identifiability of model parameters of a steady state water quality model of the Biebrza River and the resulting variation in model results was examined by applying the Monte Carlo method which combines calibration, identifiability analysis, uncertainty analysis, and sensitivity analysis. The water quality model simulates the steady state concentration profiles of chloride, phosphate, ammonium, and nitrate as a function of distance along a river. The water quality model with the best combination of parameter values simulates the observed concentrations very well. However, the range of possible modelled concentrations obtained for other more or less equally eligible combinations of parameter values is rather wide. This range in model outcomes reflects possible errors in the model parameters. Discrepancies between the range in model outcomes and the validation data set are only caused by errors in model structure, or (measurement) errors in boundary conditions or input variables. In this sense the validation procedure is a test of model capability, where the effects of calibration errors are filtered out. It is concluded that, despite some slight deviations between model outcome and observations, the model is successful in simulating the spatial pattern of nutrient concentrations in the Biebrza River.     

Measurement and research method of metallogenic depths of Jiaojia orefield and Linglong orefield Shandong Province, China

Taking the contribution of the tectonic force to the total hydrostatic pressure into account, the author puts forward a new method on the calculation of the depth of petrogenesis and metallogenesis which is summarized as follows: first the tectonic added hydrostatic pressured P_s is subtracted from the total hydrostatic pressure P, then using their difference P_r, according to the general method the depth of petrogenesis and metallogenesis can be determined in consideration of lateral constraint. By the new method the following data on the depths of the metallogenesis are obtained: 2 243.6 m (No. I and No. II veins with metallogenic epoch of 105 Ma) and 1 632. 38 m (No. III vein with 105 Ma) for Jiaojia orefield, and 3 454.97 m (NE-trending zone with 213.2 Ma), 1 902.79 III (ENE-trending zone with 100.28 Ma), 1 090.97 m (NE-trending zone with 80.67 Ma) and 720.55 m (NNE-trending zone with 71.86 Ma) for Linglong orefield. Project supported by the Foundation of the State Planning Commission, China and the Foundation of the State Science and Technology Commission, China.     

Crustal structure of Dabieshan orogenic belt

The crustal structures ofP velocity and density on the deep seismic sounding profile across the Ilabieshan orogenic belt are presented. There is a 5-km-thick crustal “root” between the Yuexi and Xiaotian where the elevation is highest on the profile. An apparent Moho offset of 4. 5 km beneath the Xiaotian-Mozitan fault marks the paleo-suture of the Triassic collision. A high-velocity anomaly zone at the depth below 3 km beneath the ultra-high pressure (UHP) zone may be correlated to the higher content of UHP metamorphic rocks. Project supported by the National Natural Science Foundation of China and the Joint Earthquake Science Foundation.