塔木察格盆地塔南凹陷下白垩统层序结构特征及控制因素分析

摘要:应用层序地层学原理对塔南凹陷下白垩统地层进行了划分和对比,建立了等时的层序地层格架,分析了不同级别层序界面的特征。对层序结构特征的研究表明,不同沉积期的层序类型、沉积体系的空间展布和配置关系有明显区别。SQ1层序为初始裂谷期湖泊层序,发育冲积扇、滨浅湖等沉积组合; SQ2层序为裂谷高峰早期湖泊层序,发育冲积扇、扇三角洲、滨浅湖等沉积组合;SQ3层序为裂谷高峰中晚期湖泊层序,发育扇三角洲、湖底扇、浅湖、深湖等沉积组合;SQ4层序为裂谷后期过渡层序,发育半深湖一深湖,大型长轴三角洲、滨浅湖、等沉积组合。不同层序发育期各层序的结构特征决定着特定沉积相带的展布,沉积体系域的沉积相构成也有变化。     

The ecological-geological system,its types and position in the structure of an ecosystem

An ecologic-geological system presents a certain volume of the lithosphere with biota, including humans and the social media functioning in it and on its surface. This system is considered as the study subject of ecological geology. In all, four types of ecological-geological systems have been distinguished and characterized: a natural real system, natural ideal system, natural-technical ideal system, and natural-technical real system. The position of an ecological-geological system in the structure of an ecosystem is shown.     

Towards a budget approach to Pleistocene terraces: preliminary studies using the River Exe in South West England, UK

This paper presents a first approach to using a sediment budget methodology for paired terrace staircase sediments in SW England. Although a budget approach has become firmly established in Holocene fluvial studies, it has not been used in Pleistocene sequences due to the problems of temporal resolution, catchment changes and downstream loss from the system. However, this paper uses a budget approach in a paired non-glaciated basin, primarily as a method of interrogating the terrace record concerning the degree of reworking and new sediment input required to produce the reconstructed terrace sequences. In order to apply a budget approach a number of assumptions have to be made and these are justified in the paper. The results suggest that the Exe system can most parsimoniously be explained principally by the reworking of a Middle Pleistocene floodplain system with relatively little input of new resistant clasts required and a cascade-type model in geomorphological terms. Whilst this maybe partially a result of the specific geology of the catchment, it is likely to be representative of many Pleistocene terrace systems in NW Europe due to their litho-tectonic similarities. This cascade-type model of terrace formation has archaeological implications and sets the context for the Palaeolithic terrace record in the UK. Future work will involve the testing of this and similar budget models using a combination of landscape modelling and chronometric dating.     

Stratigraphy, depositional environments and level reconstruction of the last interglacial Lake Samra in the Dead Sea basin

In this paper we describe the stratigraphy and sediments deposited in Lake Samra that occupied the Dead Sea basin between ∼ 135 and 75 ka. This information is combined with U/Th dating of primary aragonites in order to estimate a relative lake-level curve that serves as a regional paleohydrological monitor. The lake stood at an elevation of ∼ 340 m below mean sea level (MSL) during most of the last interglacial. This level is relatively higher than the average Holocene Dead Sea (∼ 400 ± 30 m below MSL). At ∼ 120 and ∼ 85 ka, Lake Samra rose to ∼ 320 m below MSL while it dropped to levels lower than ∼ 380 m below MSL at ∼ 135 and ∼ 75 ka, reflecting arid conditions in the drainage area. Lowstands are correlated with warm intervals in the Northern Hemisphere, while minor lake rises are probably related to cold episodes during MIS 5b and MIS 5d. Similar climate relationships are documented for the last glacial highstand Lake Lisan and the lowstand Holocene Dead Sea. Yet, the dominance of detrital calcites and precipitation of travertines in the Dead Sea basin during the last interglacial interval suggest intense pluvial conditions and possible contribution of southern sources of wetness to the region.     

Peierls dislocation modelling in perovskite (CaTiO<Subscript>3</Subscript>): comparison with tausonite (SrTiO<Subscript>3</Subscript>) and MgSiO<Subscript>3</Subscript> perovskite

We present here a numerical modelling study of dislocations in perovskite CaTiO₃. The dislocation core structures and properties are calculated through the Peierls–Nabarro model using the generalized stacking fault (GSF) results as a starting model. The GSF are determined from first-principles calculations using the VASP code. The dislocation properties such as collinear, planar core spreading and Peierls stresses are determined for the following slip systems: [100](010), [100](001), [010](100), [010](001), [001](100), [001](010), and All dislocations exhibit lattice friction, but glide appears to be easier for [100](010) and [010](100). [001](010) and [001](100) exhibit collinear dissociation. Comparing Peierls stresses among tausonite (SrTiO₃), perovskite (CaTiO₃) and MgSiO₃ perovskite demonstrates the strong influence of orthorhombic distortions on lattice friction. However, and despite some quantitative differences, CaTiO₃ appears to be a satisfactory analogue material for MgSiO₃ perovskite as far as dislocation glide is concerned.     

Model prediction capacity of ephemeral gully evolution in conservation tillage systems

Ephemeral gully (EG) erosion has an important impact on agricultural soil losses and increases field surface hydrology connectivity and transport of pollutants to nearby water bodies. Watershed models including an EG component are scarce and not yet properly evaluated. The objective of this study is to evaluate the capacity of one such tool, AnnAGNPS, to simulate the evolution of two EG formed in a conservation tillage system. The dataset for model testing included runoff measurements and EG morphological characteristics during 3 years. Model evaluation focused on EG evolution of volume, width, and length model outputs, and included calibration and testing phases and a global sensitivity analysis (GSA). While the model did not fully reproduce width and length, the model efficiency to simulate EG volume was satisfactory for both calibration and testing phases, supporting the watershed management objectives of the model. GSA revealed that the most sensitive factors were EG depth, critical shear stress, headcut detachment exponent coefficient b, and headcut detachment leading coefficient a. For EG outputs the model was additive, showing low sensitivity to interactions between the inputs. Prediction of EG spatial evolution on conservation tillage systems requires improved development of gully erosion components, since many of the processes were developed originally for traditional tillage practices or larger channel systems. Our results identify the need for future research when EG form within conservation tillage systems, in particular to study gully headcut, soil erodibility, and width functions specific to these practices.     

Solid phase characterization and metal deportment in a mussel shell bioreactor for the treatment of AMD,Stockton Coal Mine,New Zealand

The Stockton Coal Mine, located on the West Coast of New Zealand, is evaluating the use of a mussel shell bioreactor (MSB) to treat acidic metalliferous runoff from acid forming overburden. This novel approach is similar in concept to vertical flow wetlands (VFWs) and successive alkalinity producing systems (SAPS). The MSB system is a trapezoidal pit 2 m deep, 35 m long, 3–10 m wide with 60° angle sides. During operation it contained 160 tonnes (240 m³) of mussel shell material and was saturated with a 100–200 mm water cap. Influent flowed through the reactor at a mean rate of 0.3 L s⁻¹ resulting in a hydraulic retention time (HRT) of ≈6 days. The prototype MSB was in operation for a total of 1027 days, from June 2009 through March 2012, and effectively sequestered 99.7% of Al, 99.3% of Fe, 98.8% of Ni, 98.4% Tl and 99.3% of Zn, as determined from a previous evaluation of MSB performance. The MSB also effectively neutralized acidity, which resulted in an increase in influent pH from 2.8 to 6.9 in the effluent. Based on an examination of several excavated pits, five distinct reaction zones developed within the MSB. The reaction zones consisted of an allochthonous sediment layer (0–330 mm), an oxidized iron-rich ocherous layer (at 330–350 mm depth), an aluminum layer (at 350–600 mm depth) with geochemical variations throughout (350–500 mm and 500–600 mm); and a chemically reduced bottom shell layer (at 600–1100 mm). Representative samples were collected from each layer and analyzed using a combination of geochemical and physical methods to assess the stability of the secondary minerals and trace metal deportment within the MSB. Major elements Fe, Al, Ni, Tl, and Zn where preferentially associated with particular layers within the MSB. Elevated concentrations of Fe (110,000 mg kg⁻¹) were observed in the allochthonous sediment and ocherous precipitate layers, while Al (27,816 mg kg⁻¹), Ni (55 mg kg⁻¹), and Zn (655 mg kg⁻¹) were elevated within the aluminum and lower reduced depths within the MSB. Trace Tl (21 mg kg⁻¹) showed varying concentrations throughout the MSB, but was strongly correlated to lower layers of the system. Microbial biofilms were observed within the reduced portions of the shell layers often proximal to bacterial shaped sulfides. The geochemical assessment of the MSB presented in this study is the first of its kind for a MSB, and supports the argument that this system is another viable option for passive treatment of AMD.