Composition and distribution of meiobenthos in amursky bay (peter the great bay, the east sea)

Qualitative and quantitative composition of meiobenthos was studied in Amursky Bay (Peter the Great Bay, the East Sea). Ten taxonomic groups were found, where nematodes were dominant. Density of meiobenthos in ground sediments of the Bay were not uniform, and the average density was measured at 126.4±62.3 ind. m^-2. 56 species of nematodes were detected, and dominant species wereSabatieria palmaris, Paracanthonchus macrodon, Sphaerolaimus limosus, S. gracilis andOncholaimium ramosum. Five taxocenes of nematodes were allocated based on the results of cluster analysis and species domination according to density. Low diversity in species composition of nematodes was noted in the northwestern part of the Bay, which is a zone of desalination, and in the eastern part, which is exposed to household drains.     

波群作用于垂直桩柱的峰力统计性质

研究具有窄谱和Ｗｅｉｂｕｌｌ波高分布的波群对非线性桩柱系统作用力的统计性质。求得了桩桩的波浪峰力的各种特征值及其比值。指出这些数值不仅是阻力一惯性力参数ｂＨ的函数，也随着波群因子而变化。本文模式更具广泛性。文中给出了一系列计算图表，可从理论计算波群作用于桩柱的波浪峰力。     

不同卵密度对太平洋牡蛎三倍体诱导效果影响的研究

本实验主要研究用70mg／L浓度的6－MDAP（二甲基氨基嘌呤）对太平洋牡蛎的受精卵进行三倍体诱导，研究受精卵的密度对诱导效果的影响，以及诱导后受精卵的孵化率和畸形率。实验结果表明：当受精卵的密度为4万个／ml时三倍体率最高，相应的孵化率最高，综合来看，4万/ml的卵密度是生产上较好的受精卵处理密度。     

数字水准仪标尺编码原理研究

数字水准仪的标尺编码规则直接影响其测量精度.基于现有几种数字水准仪标尺编码的特点,归纳出标尺条码的编码衡量指标:信息密度、分辨率和纠错能力.以条码的最大编码容量与单个码区长度之比值衡量其承载的信息密度;利用光学系统的点扩散函数研究条码图像的分辨率,即相邻边缘的相互影响,得出码元相邻边缘的间距相等时,影响最小的结论;用相关系数或编码所用函数本身的性质表征条码的纠错能力.依据编码指标建立一套新的标尺编码规则:以格雷码为数值码,固定宽度的码元为参考码,两者交替组合.分析表明,该种编码不但信息密度大,分辨率高,而且纠错能力强.     

黑龙江省中部森林沼泽区金在土壤A层中的富集规律

探讨了金在黑龙江省中部森林沼泽区A层土壤-10～+60目、-60～+100目、-100～+160目及-160目粒级中的含量分布特征和富集规律。经对比研究认为,-100目可以满足低密度深穿透地球化学详细测量采样要求,该粒级能够有效地发现异常。     

半参数平差模型估计量的精度评定

将半参数估计理论引入测量数据处理理论中,利用Blight和Ott提出的思想,用多项式函数来表示半参数平差模型中的非参数分量,从而得到了半参数平差模型中参数分量和非参数分量的Bayes估计量,通过理论证明,半参数模型参数分量的Bayes估计为通常意义下高斯马尔可夫模型参数估计值与参数期望的加权平均,是一致、渐近无偏和渐近有效估计量,并且其方差小于参数模型中参数估计量的方差。在一定情况下推广了平差理论,具有一定的理论价值。     

基于GIS的人口分布图的绘制研究——以辽阳市为例

主要论述传统的人口分布专题地图方法及其不足,阐述了人口分布与土地利用之间的关系,运用人口在不同用地类型上的分配的理论,模拟人口分布,根据辽阳市的土地利用情况以及人口数字准备来绘制人口分布图。     

对一种振冲碎石桩复合地基沉降计算方法——Priebe法的改进

通过对经典的Priebe沉降计算法分析,以及面积置换率的变化对桩体压缩性假设作了改进;对桩土重度差异及承受荷载时应力和变形与深度的关系作了分析,归纳出相应的数学计算公式,用工程实例进行了验证。得到的结果表明改进是合理、适用的,可为今后的设计和施工提供参考。     

Debris-flow event in the Frangerello Stream-Susa Valley (Italy)—calibration of numerical models for the back analysis of the 16 October, 2000 rainstorm

Three debris-flow simulation model software have been applied to the back analysis of a typical alpine debris flow that caused significant deposition on an urbanized alluvial fan. Parameters used in the models were at first retrieved from the literature and then adjusted to fit field evidence. In the case where different codes adopted the same parameters, the same input values were used, and comparable outputs were obtained. Results of the constitutive laws used (Bingham rheology, Voellmy fluid rheology and a quadratic rheology formulation which adds collisional and turbulent stresses to the Bingham law) indicate that no single rheological model appears to be valid for all debris flows. The three applied models appear to be capable of reasonable reproduction of debris-flow events, although with different levels of detail. The study shows how different software can be used to predict the debris-flow motion for various purposes from a first screening, to predict the runout distance and deposition of the solid material and to the different behaviour of the mixtures of flows with variation of maximum solid concentration.     

Comparison of numerical models of two debris flows in the Cortina d’ Ampezzo area,Dolomites, Italy

The accurate prediction of runout distances, velocities and the knowledge of flow rheology can reduce the casualties and property damage produced by debris flows, providing a means to delineate hazard areas, to estimate hazard intensities for input into risk studies and to provide parameters for the design of protective measures. The application of most of models that describe the propagation and deposition of debris flow requires detailed topography, rheological and hydrological data that are not always available for the debris-flow hazard delineation and estimation. In the Cortina d’Ampezzo area, Eastern Dolomites, Italy, most of the slope instabilities are represented by debris flows; 325 debris-flow prone watersheds have been mapped in the geomorphological hazard map of this area. We compared the results of simulations of two well-documented debris flows in the Cortina d’Ampezzo area, carried on with two different single-phase, non-Newtonian models, the one-dimensional DAN-W and the two-dimensional FLO-2D, to test the possibility to simulate the dynamic behaviour of a debris flow with a model using a limited range of input parameters. FLO-2D model creates a more accurate representation of the hazard area in terms of flooded area, but the results in terms of runout distances and deposits thickness are similar to DAN-W results. Using DAN-W, the most appropriate rheology to describe the debris-flow behaviour is the Voellmy model. When detailed topographical, rheological and hydrological data are not available, DAN-W, which requires less detailed data, is a valuable tool to predict debris-flow hazard. Parameters obtained through back-analysis with both models can be applied to predict hazard in other areas characterized by similar geology, morphology and climate.