微量相X射线衍射定量分析的一种简便方法

阐述了关于微量相X射线衍射定量分析的一种简便方法———近似线性关系法,它适用于二相体系(或基体吸收系数基本恒定的多相体系)材料中微量相的定量分析。该方法不需要在待测样品中加入参考物相,分析时仅需对一条衍射线进行测定,因而分析时间很短,其测定结果与实际含量的相对误差为-10.2%～ 21.4%,与外标法和内标法的测量结果的精度相当。     

三种类型烃-烃不混溶包裹体组合的特征和热力学条件的计算

在自然界广泛分布着烃-烃不混溶体系中捕获的流体包裹体,由于这些包裹体具有复杂的组成和相态,因此不混溶包裹体组合的判别和热力学参数的计算常常难以进行。根据烃-烃不混溶体系中两个端员组分流体包裹体室温下的相态特征和在温度-压力平面图上等容线交点显示的位置,划分成三种类型流体包裹体组合,本介绍了三种类型流体包裹体组合特征,叙述了不混溶烃-烃包裹体组合的测定和判别方法,并且阐述均一化包裹体相态方程和气-液平衡常数原理和方法与此同时列举了自然界简单的三种类型不混溶烃-烃包裹体组合的测定、判别和计算的几个实例,利用相态方程和气-液平衡常数,不但精确地计算出包裹体均一压力,并且精确地计算出流体密度和体积等热力学参数。最后,利用均一成气相和液相的两种包裹体在 p-T 平面图上等容线交点同样计算出流体包裹体组合的捕获温度和压力。     

水气两相流系统K-S-P模型参数反演的最优估计

应用渗流力学和参数反演辨识最优化理论,建立了水气两相流控制方程,给出了控制两相流系统K-S-P模型参数之间的本构关系,并对其中的相关参数进行数值反演辨识,得出待求参数的最优估计值。对不同质地土壤的实验测试值进行对比分析,其结果吻合较好,验证了模型的适定性和可靠性,解决了实验数据处理以及结果对初值的敏感性问题,并且该数值方法可通过多组初值参数进行数值实验,结合实验结果来满足实际工程的需求。这不仅对非饱和带内污染物传输、气藏工程试井计算、填埋气体的释放以及挥发性有机污染物的去污分析中两相流数值计算提供基础,而且对K-S-P本构关系之间参数的确定提供了可靠的理论依据。     

单频GPS整周模糊度动态快速求解的研究

提出了一种动态快速求解整周模糊度的方法,即先对系数阵进行QR分解,然后通过矩阵变换使模糊度参数和位置参数分离,从而降低矩阵的维数,满足实时动态求解的要求,最后应用LAMBDA方法搜索模糊度。为验证该算法,用单频GPS接收机进行了静态定位和动态定位两种试验。结果表明,静态定位误差小于1cm,动态定位误差小于3cm。由此可见,该方法能够为动态用户快速而精确地实施GPS单频动态定位。     

长江三角洲环境地质调查评价GIS管理系统建设初探

长江三角洲是一个人口稠密、经济高度发达的地区 ,该区地质结构复杂、环境地质条件十分脆弱 ,长期以来因过量开采地下水 ,形成大面积区域性水位降落漏斗 ,诱发了相当严重的地面沉降、地裂缝等地质灾害 ,给当地经济可持续发展带来严重威胁。本文从开展长江三角洲环境地质调查评价的现实意义出发 ,探讨了长江三角洲环境地质调查评价GIS管理系统的系统目标、开发模式以及实现步骤 ,概括介绍了系统所应具有的功能 ,为长江三角洲项目信息系统建设提出了一条可行性思路。     

黄河三角洲地区浅层沉积序列及构造沉降特征

在整个黄河三角洲地区和莱洲湾南岸晚更新世以来经历了海陆相沉积的频繁交替,本文通过古地磁和14C测年资料对不同钻孔的晚更新世地层进行了精确的年代对比,揭示了不同时期的沉积序列。并通过27口钻井的联合对比剖面,揭示出本区晚更新世以来的新构造运动表现为二凹夹一隆的构造特征,对黄河三角洲发育位置和沉降特征有强烈的控制作用。     

裂隙型单斜介质中弹性系数的计算及波的传播特性研究

根据Hudson等关于裂隙介质弹性系数计算的扰动理论及Bond变换矩阵原理，给出了各向同性介质中含多组垂直裂隙时等效弹性系数的计算方法。计算了含两组斜交的垂直裂隙形成的单斜各向异性介质中的等效弹性系数，并根据Christoffel方程推导、得出水平面内平面波传播的相速度和群速度随方位变化的特性。     

Spatial variation of overbank aggradation rate and its influence on avulsion frequency

Abstract River avulsions are commonly considered to be driven by the aggradation and growth of alluvial ridges, and the associated increase in cross‐valley slope relative to either the down‐channel slope or the down‐valley slope (the latter is termed the slope ratio in the present paper). Therefore, spatial patterns of overbank aggradation rate over stratigraphically relevant time scales are critical in avulsion‐dominated models of alluvial architecture. Detailed evidence on centennial‐ to millennial‐scale floodplain deposition has, to date, been largely unavailable. New data on such long‐term overbank aggradation rates from the Rhine–Meuse and Mississippi deltas demonstrate that the rate of decrease of overbank deposition away from the channel belt is much larger than has been supposed hitherto, and can be similar to observations for single overbank floods. This leads to more rapid growth of alluvial ridges and more rapid increase in slope ratios, potentially resulting in increased avulsion frequencies. A revised input parameter for overbank aggradation rate was used in a three‐dimensional model of alluvial architecture to study its effect on avulsion frequency. Realistic patterns of avulsion and interavulsion periods (≈1000 years) were simulated with input data from the Holocene Rhine River, with avulsions occurring when the slope ratio is in the range 3–5. However, caution should be practised with respect to uncritical use of these numbers in different settings. Evidence from the two study areas suggests that the avulsion threshold cannot be represented by one single value, irrespective of whether critical slope ratios are used, as in the present study, or superelevation as has been proposed by other investigators.     

An automated strategy for calculation of phase diagram sections and retrieval of rock properties as a function of physical conditions

We formulate an algorithm for the calculation of stable phase relations of a system with constrained bulk composition as a function of its environmental variables. The basis of this algorithm is the approximate representation of the free energy composition surfaces of solution phases by inscribed polyhedra. This representation leads to discretization of high variance phase fields into a continuous mesh of smaller polygonal fields within which the composition and physical properties of the phases are uniquely determined. The resulting phase diagram sections are useful for understanding the phase relations of complex metamorphic systems and for applications in which it is necessary to establish the variations in rock properties such as density, seismic velocities and volatile‐content through a metamorphic cycle. The algorithm has been implemented within a computer program that is general with respect to both the choice of variables and the number of components and phases possible in a system, and is independent of the structure of the equations of state used to describe the phases of the system.     

Gold Occurrence and Ore Genesis,Yata Micro—Disseminated Gold Deposit,Guizhou,Southwest China

The mode of occurrence of gold in the Yata micro-disseminated gold deposit is ap-proached through chemical phase studies coupled with ore-dressing monitoring and micro-beam analysis.The results showed that gold occurred for the most part as ultra-microscopic particles adsorbed on the surfaces or fracture planes of pyrite and other sulphides.The proportions of gold of different occurrences were estimated solutions containing nanometer-sized gold particles were prepared following the hydrolysis-reduction procedure and the adsorption of nanometer-sized gold on ordinary sulphides and rocks was experimentally determined.It is evident that sulphides are good adsorbents of gold and this is consistent with geological observations.