Tectono–Thermal Evolution, Hydrocarbon Filling and Accumulation Phases of the Hari Sag, in the Yingen–Ejinaqi Basin, Inner Mongolia, Northern China

This work restored the erosion thickness of the top surface of each Cretaceous formations penetrated by the typical well in the Hari sag, and simulated the subsidence burial history of this well with software BasinMod. It is firstly pointed out that the tectonic subsidence evolution of the Hari sag since the Cretaceous can be divided into four phases: initial subsidence phase, rapid subsidence phase,uplift and erosion phase, and stable slow subsidence phase. A detailed reconstruction of the tectonothermal evolution and hydrocarbon generation histories of typical well was undertaken using the EASY R_0% model, which is constrained by vitrinite reflectance(R_0) and homogenization temperatures of fluid inclusions. In the rapid subsidence phase, the peak period of hydrocarbon generation was reached at c.a.105.59 Ma with the increasing thermal evolution degree. A concomitant rapid increase in paleotemperatures occurred and reached a maximum geothermal gradient of about 43-45℃/km. The main hydrocarbon generation period ensued around 105.59-80.00 Ma and the greatest buried depth of the Hari sag was reached at c.a. 80.00 Ma, when the maximum paleo-temperature was over 180℃.Subsequently, the sag entered an uplift and erosion phase followed by a stable slow subsidence phase during which the temperature gradient, thermal evolution, and hydrocarbon generation decreased gradually. The hydrocarbon accumulation period was discussed based on homogenization temperatures of inclusions and it is believed that two periods of rapid hydrocarbon accumulation events occurred during the Cretaceous rapid subsidence phase. The first accumulation period observed in the Bayingebi Formation(K_1 b) occurred primarily around 105.59-103.50 Ma with temperatures of 125-150℃. The second accumulation period observed in the Suhongtu Formation(K_1 s) occurred primarily around84.00-80.00 Ma with temperatures of 120-130℃. The second is the major accumulation period, and the accumulation mainly occurred in the Late Cretaceous. The hydrocarbon accumulation process was comprehensively controlled by tectono-thermal evolution and hydrocarbon generation history. During the rapid subsidence phase, the paleo temperature and geothermal gradient increased rapidly and resulted in increasing thermal evolution extending into the peak period of hydrocarbon generation,which is the key reason for hydrocarbon filling and accumulation.     

柴达木盆地东部上石炭统克鲁克组碎屑岩储层特征及控制因素

柴达木盆地上石炭统克鲁克组是该区重要的古生界勘探层位,组内发育多套良好的碎屑岩层。为探究其岩石物性特征及控制因素,本次以野外露头调查为基础,利用普通薄片、铸体薄片鉴定及扫描电镜等手段,结合物性测试和压汞资料,对克鲁克组碎屑岩纵向分布规律,储层岩性、物性、孔喉特征及孔隙类型进行分析。认为克鲁克地层中克2段发育的三角洲前缘亚相和克3段的具障壁海岸潮坪相的大套含砾粗砂岩、粗砂岩砂体原生、次生孔洞发育,孔喉大、分布集中、分选好,为有利的碎屑岩储层。早成岩期压实作用、重结晶及胶结作用对克鲁克组砂岩的原生孔隙破坏严重,晚成岩期储层改造形成的溶孔、裂缝—溶孔是油气成藏的主要储存空间。该研究为预测柴东石炭系克鲁克组油气有利区域提供依据,为今后该地区的油气勘探提供理论支撑。     

浅水三角洲沉积体系与储层岩石学特征

浅水三角洲已经成为当前沉积学研究和油气勘探的重点领域,浅水三角洲常规和非常规砂岩储层中发现了丰富的油气资源。鄂尔多斯盆地中—古生界发育大型浅水三角洲沉积,结合岩芯、测井、分析化验等资料,对盆地西部地区山1—盒8段浅水三角洲的母岩特征、沉积充填、砂体展布与储层岩石学特征进行研究,为研究区常规砂岩储层和致密砂岩油气勘探提供地质依据。分析表明,研究区南部和北部砂岩重矿物组合相似,以锆石和白钛矿为主。综合La/Yb-REE与Dickinson三角图解、稀土元素配分模式和碎屑锆石定年分析认为,北部物源主要来自盆地西北部阿拉善古陆太古界和元古界花岗岩、片麻岩、石英砂岩,向南影响到陇东地区北部;南部物源主要来自盆地南部北秦岭地区太古界、元古界花岗岩、片麻岩和片岩,向北影响陇东地区中南部。山1段发育曲流河三角洲,盒8段发育辫状河三角洲,孤立型与垂向叠置型水下分支河道砂体是主要的砂体类型。盒8段沉积时期,古湖泊可能萎缩;南北物源形成的三角洲在研究区中部环县东南一带交汇混合。砂岩类型主要为岩屑质石英砂岩、石英砂岩和岩屑砂岩,结构成熟度中等—较差。砂岩成岩改造强烈,水—岩反应复杂,压实作用是储层致密化的主因,多期胶结作用使砂岩的孔喉结构变得十分复杂。孔隙类型以微米—纳米级的岩屑溶蚀孔、剩余粒间孔和高岭石晶间孔为主,整体上属于非常规致密砂岩储层。砂体分布与“甜点”预测是研究区致密油气勘探的关键。     

全风化花岗岩地层中高固相离析浆液灌浆机理研究

全风化花岗岩地层稳定性差、遇水易发生崩解,工程上使用常规材料防渗加固注浆时效果较差。针对这一情况,依托湖南省郴州市莽山水库防渗加固灌浆项目,通过自主设计的全风化花岗岩地层注浆室内模拟试验装置,进行模拟注浆试验,实现了浆液在整个注浆过程中的扩散情况模拟,对不同注浆压力、不同位置点所取试样开展单轴抗压、抗剪强度及渗透率测试试验,对不同注浆压力下完整结石体取样观察,研究以全风化花岗岩颗粒为配方主体材料的高固相离析浆液在全风化花岗岩地层的防渗加固效果及浆液扩散模式。结果表明:该浆液在全风化花岗岩地层扩散过程中经历了渗透扩散、挤密压缩、劈裂扩展三个阶段,是一种复合注浆形式;以全风化花岗岩颗粒为主体的高固相离析浆液在全风化花岗岩地层注浆中效果显著,随着注浆压力提升,单轴抗压强度显著提升为原土体的3.25～13.67倍,抗剪强度在不同法向压力情况下提升为原土体的1.63～2.69倍,渗透系数从10?4 cm/s下降至10?5 cm/s甚至10?6 cm/s。     

汊口滩沉积特征及沉积模式——以鄱阳湖赣江三角洲汊口滩为例

随着我国许多油田进入高含水开发阶段,剩余油挖潜难度增大,复合分流河道带和单河道的划分已不能满足生产要求,迫切需要进行分流河道内部有利砂体的识别。现代沉积研究是认识分流河道内砂体发育特征的有效手段。通过对鄱阳湖赣江三角洲的现场考察,发现汊口滩是三角洲分流河道中发育的重要砂体类型,以发育在分流河道的分汊口处为典型特征。根据水动力条件、沉积物组合、沉积构造等特征,将汊口滩划分为滩头、滩中、滩尾3个沉积单元。从滩头到滩尾具有水动力条件减弱、沉积物层理规模减小、单砂层厚度减小、粒度变细、泥质夹层增多的特点。汊口滩主要是由于在分汊口处,水流受到汊口的顶托作用流速降低,沉积物按粒度分异堆积形成;堆积方式主要以向上游方向的逆流加积为主。与水道砂体相比,汊口滩发育的层理类型多,而且内部夹层发育,非均质性更强;由于夹层的遮挡作用,砂体不易发生水淹,有利于形成剩余油的富集区。     

CINRAD-SA双偏振雷达资料在降水估测中的应用初探

对基于水平反射率ZH和差分传播相移率K_(DP)的降水估测综合法R(C)进行了改进,并对广州S波段双偏振雷达2016年2次飑线和2次台风降水过程的Φ_(DP)使用小波分析进行滤波处理,在此基础上使用变距最小二乘法拟合得到K_(DP)的值。分别使用R(C)和R(Z_H)法对2次飑线和2次台风降水过程进行降水估算,将估算结果和雨量计小时雨量进行了对比,并将两种方法的评估结果进行了对比。结果表明:(1)对于飑线类型降水,R(C)法对5 mm·h~(-1)以上的降水估测精度要好于R(Z_H)法,且降水率越大,R(C)法优势越明显,当降水率≥20 mm·h~(-1)时,两次过程R(C)法比R(Z_H)法的平均相对误差(RE)降低了17. 2%,平均绝对误差(AE)减少了1.89 mm,平均均方根误差(RMSE)减少了1.66 mm;(2)对于台风类型降水,R(C)法对5 mm·h~(-1)以上的降水估测精度也好于R(Z_H)法,当降水率≥20 mm·h~(-1)时,两次过程R(C)法比R(Z_H)法的平均RE降低了33. 19%,平均AE减少了3. 95 mm,平均RMSE减少了4.05 mm;(3)对于飑线和台风两种类型降水R(C)法都明显改善了降水率较大时的R(Z_H)法低估问题,但R(C)法在降水率10 mm·h~(-1)时也存在低估,可能是由雨滴谱资料观测误差导致拟合的系数偏小或雷达硬件造成的观测偏差等造成的。     

长三角经济高速发展地区土壤pH时空变化及其影响因素

通过调查和分析长三角地区张家港市2004年和第二次土壤普查时(1980)的土壤pH,探讨了该市近20年来基于经济高速发展影响下的土壤pH变化及影响因素。结果表明,自第二次土壤普查以来,该市土壤pH变化明显。南部人为土地区绝大部分土壤pH值都下降了一个单位,平均值由7.39降至6.33;北部雏形土区,两个时期的土壤pH值分别为7.92和7.98。土壤pH的降低可能同该地区长期施用化学肥料、酸雨及工业酸性“三废”排放的增加有关。此外,土地利用和田间管理也对土壤pH变化起着较为重要的作用,而土壤地球化学性质差异则是导致南北地区土壤pH变化不同的内在因素。     

A modified analytical method for the shipboard determination of nanomolar concentrations of orthophosphate in seawater

A method for the determination of nanomolar concentrations of orthophosphate in oligotrophic seawater developed by Liang et al. (2007) has been modified to make it fully feasible for shipboard application and for faster sample throughput with minimized sample volume. The technique is based on the flow injection method with solid phase extraction on a Sep-Pak C18 cartridge and colorimetric detector. The Schlieren effect was minimized by rinsing the cartridge sequentially with 5 mL water and 2 mL 95% ethanol solution. With three micro pumps in parallel, savings of up to 80% in amount of reagents and 25% volume of seawater samples could be achieved in comparison to the previous method. Variation of stopped flow time and sample loading time gave 3 different standard curves, which corresponded to 3 linear ranges within 3.4 and 515 nM. The modified method permits the analysis of samples over a wide range of concentrations, and has been successfully applied to shipboard determination of trace orthophosphate in more than 200 seawater samples during a one-month cruise in the South China Sea. For seawater at concentrations of 20.6, 82.5, 206.2 nM orthophosphate, the relative standard deviations (RSD) (n = 6), determined daily for 6 days on board ship were 4.45%, 4.73% and 6.75%, respectively. Five seawater samples collected in the Station SEATS (South East Asia Time Series Station at 18°N, 116°E) were analyzed using the present method both on board and in a land-based laboratory, as well as with the magnesium hydroxide-induced coprecipitation (MAGIC) method, and showed no significant difference according to the statistical t-test.     

废弃的黄河三角洲的地形特征及演化

根据2005年开展的海底地形调查资料并结合前人资料,对废弃的黄河口三角洲海区的海底地形特征及演化进行了分析。通过分析表明,近20年来,本区海岸处于侵蚀状态,蚀退速率约在50～80 m/a之间,海底地形处于冲涮状态,5m和10m等深线向岸方向移动600～900 m左右。