哀牢山-红河断裂带中段应变分析

对哀牢山—红河断裂带中段和平—水塘剖面、墨江—元江剖面和其它地段的岩石应变及磁组构进行了分析，表明应变强度的校正磁各向异性度PJ从断裂带向西至三叠系明显降低，变形强度向西迅速减弱。磁化率椭球体主轴展布反映出剪切带内、外变形方式的改变。剪切带内，以水平走滑运动为主；向西则以水平缩短为主。在应变分析中，对断裂带内的S—C组构两组面理夹角、杏仁体和石榴石应变标志体进行了测量，结果显示，剪切带内的磁组构和岩石组构间关系较差。此外，还对这两条剖面中的三叠系进行了应变和磁组构分析，找出了它们与磁化率椭球体对应轴率间的相关性。     

边坡整体稳定的可靠性分析方法

边坡整体滑动稳定性的可靠性分析是建立在土体具有的抗力大于荷载效应的概率基础上进行设计和校验的。在条分法的基础上推导出了进行边坡稳定可靠性分析的统一极限状态方程 ,将土的容重γ、内摩擦角φ、粘聚力 c作为随机变量 ,当其为非正态分布时 ,进行当量正态化 ,考虑变量相关的情况 ,用简化相关法对随机变量进行统计分析 ,并以 Bishop圆弧滑动法为例 ,用 JC法求解边坡的可靠性指标及失效概率 ,给出计算安全系数和可靠性指标的算法程序。并就影响可靠性指标的因素如抗剪强度指标、变量分布形式、土性参数的变异性等进行了讨论。     

Bowen数和东中国海Bowen数分布

本文讨论Bowen数的意义、功能和计算法。同时,依据多年水文气象实测资料作统计,计算出东中国海的Bo值。其结果绘制成1月至12月的月平均分布图,从而对本海域的Bo分布特点作详细分析介绍。     

On the instability of “folded” equilibria of a flexible nonstretchable thread attached to the satellite in a circular orbit

The author considers a problem of Lyapunov's stability of relative equilibria of a flexible nonstretchable thread attached to the satellite moving in a circular Keplerian orbit in the first approximation. When it is in the position of relative equilibrium, the thread is known to be situated either along the radius vector of the orbit (the radial equilibrium) or along the circular orbit (the tangential equilibrium) and in each case the thread can be in a folded state. The author shows that folded radial equilibria of the thread are always unstable while tangential ones are unstable if the thread is sufficiently short in comparison with the radius of the orbit. The generalized Chetaev functional has been constructed to prove the instability.     

思林水电站通航建筑物高边坡稳定分析和评价

应用ANSYS结构分析软件,模拟了思林水电站通航建筑物高边坡的地形、地质条件以及开挖的过程,建立边坡开挖的有限元计算分析模型,分析边坡在自然状态、分级开挖以及锚杆支护加固等工况下的应力、变形及其整体稳定性.定义单元的局部安全系数,得到了边坡开挖加固后稳定安全系数的分布.根据计算成果,指出现设计加固措施可以保证边坡稳定,无需增加其他工程措施.     

智能全站仪在大型压力容器焊接变形监测中的应用

在大型压力容器的部件焊接过程中,由于预热、焊接等工艺流程会导致各部件产生变形,从而引起部件之间的位置关系产生变化。为保证压力容器成品满足设计要求,必须在制造过程中实施变形监测,依据变形数据适当调整焊接工艺流程,控制变形量。提出采用智能全站仪配以自动变形监测软件对大型压力容器焊接变形进行实时监测,并应用于生产实践中,监测结果表明该方法自动化程度高、实时性好,能同时给出位置和姿态变形数据。     

变形监测信息管理系统的设计与实现

介绍了GIS数据管理与图形显示的优势、组件技术,设计了变形监测数据管理系统平台,实现了变形监测数据的智能化管理、分析与预测.     

Jurassic Tectonics of North China: A Synthetic View

This paper gives a synthetic view on the Jurassic tectonics of North China, with an attempt to propose a framework for the stepwise tectonic evolution history. Jurassic sedimentation, deformation and magmatism in North China have been divided into three stages. The earliest Jurassic is marked by a period of magmatism quiescence （in 205-190 Ma） and regional uplift, which are considered to be the continuation of the “Indosinian movement” characterized by continent-continent collision between the North and South China blocks. The Early to Middle Jurassic （in 190-170 Ma） was predominated by weak lithospheric extension expressed by mantle-derived plutonism and volcanism along the Yanshan belt and alongside the Tan-Lu fault zone, normal faulting and graben formation along the Yinshan- Yanshan tectonic belt, depression and resuming of coal-bearing sedimentation in vast regions of the North China block （NCB）. The Middle to Late Jurassic stage started at 165y.5 Ma and ended up before 136 Ma; it was dominated by intensive intraplate deformation resulting from multi-directional compressions. Two major deformation events have been identified. One is marked by stratigraphic unconformity beneath the thick Upper Jurassic molasic series in the foreland zones of the western Ordos thrust-fold belt and along the Yinshan-Yanshan belt; it was predated 160 Ma. The other one is indicated by stratigraphic unconformity at the base of the Lower Cretaceous and predated 135 Ma. During this last stage, two latitudinal tectonic belts, the Yinshan-Yanshan belt in the north and the Qinling-Dabie belt in the south, and the western margin of the Ordos basin were all activated by thrusting; the NCB itself was deformed by the NE to NNE-trending structural system involving thrusting, associated folding and sinistral strike-slip faulting, which were spatially partitioned. Foliated S-type granitic plutons aged 160-150 Ma were massively emplaced in the Jiao-Liao massif east of the Tan-Lu fault zone and indicate important crustal thicken     

变形分析的神经网络技术应用实例

大型工程施工过程中的变形监测、分析与预报极为重要。变形分析建模的方法很多,神经网络技术的应用是其中之一。文中结合某深基坑工程的监测资料和工作经验,运用神经网络BP算法进行预测分析。简述BP神经网络的基本概念,介绍基坑变形分析的BP神经网络的具体模型结构,将神经网络方法预报结果与实测数据对比效果较好。该成果对生产实践具有参考价值。     

中国西部现今地壳形变与地震活动特征

以1999-2004年间中国西部地区近650个GPS站点的观测资料为基础,采用二维“高张力样条”函数内插算法获得了连续地壳形变场。结果表明,相对于稳定欧亚参考框架,中国西部现今地壳运动西强东弱,北向运动从西向东逐渐减弱,东向运动逐渐增强,青藏高原东缘及附近地区是东向运动的消减区带;主应变从西向东由压缩应变转变为拉伸应变;最大剪应变主要位于喜马拉雅地块及其东部地区;中国西部地区地震活动在空间分布上似乎集中发生在印度板块北东向挤压欧亚板块的两条共扼带内,与地壳形变场有一定对应关系,地壳形变的高应变率区为中强地震多发地带。