A simulation model of morphological,vegetation and sediment changes in ephemeral streams

A model to simulate channel changes in ephemeral river channels and to test the effects of hydrological changes due to climate change and[sol ]or land use change was developed under the auspices of the EU funded MEDALUS programme (Mediterranean Desertification and Land Use). The model, CHANGISM (Channel Change GIS Simulation Model), is designed to simulate the effect of channel flow events and of climate conditions on morphology, sediment and vegetation, through sequences of events and conditions, over periods of up to several decades. The modelling is based on cellular automata but with calculations for water and sediment continuity. Process rules have both deterministic and stochastic elements. An important feature of the model is that it incorporates feedback elements between each event. The main aim of the model is to indicate the likely outcomes of events and combinations of conditions. It is linked to GIS for both input and output. The modelling is based on a channel reach and state is input as GIS layers of morphology (DEM), sediment and vegetation cover and state. Other initial conditions of soil moisture, groundwater level, and overall gradient are input. Parameters for processes are read from tables and can be easily changed for successive runs of the model. The bases for decisions on process specifications are discussed in this paper. Initial tests of the operation and sensitivity of the model were made on idealized reaches. The model was then tested using data from monitored sites in SE Spain. Simulations using clearwater flow worked well but initial simulations using events with sediment loads showed some tendency for excess deposition. Further tests and modifications are taking place. Overall, the model is one of the most sophisticated that simulates the interaction of flows with sediment and vegetation and the outcomes in terms of erosion, deposition, morphology, sediment cover, vegetation cover and plant survival over periods of up to 30 years for the scale of a channel reach. Copyright © 2005 John Wiley & Sons, Ltd.     

Discussion on the dynamic mechanism of Great North China area based on the observed stress data

Introduction The Great North China, located at longitude 106E to 124E and latitude 31N to 42N, in-cludes three secondary active tectonic blocks, Ordos, Yanshan and North China plain (Figure 1). The geological tectonics of these three secondary blocks is much different from each other. As a stable block with high rigidity, the Ordos block is mostly surrounded by down-faulted basins with an inactive interior since Cenozoic, although the fault zones along its boundary are strongly active wi…     

Numerical simulation for 1975 Haicheng and 1999 Xiuyan earthquake processes by DDA+FEM

Introduction The Xiuyan earthquake(MS=5.4)on Nov.29,1999,occurred between Hushan town and Pi-anling town at the southeast end of the aftershocks of Haicheng earthquake(MS=7.3).These two earthquakes′sequences are highly similar in the way that the foreshocks are very frequent,focal mechanisms of the main shocks are about the same and fault strikes are approximately in the same direction.It is important to study these earthquakes for further research on seismogenesis to fore-cast earthquake…     

Preliminary study on variation characteristics of ocean tide dynamic stress in crust and its relationship with earthquakes

~~Preliminary study on variation characteristics of ocean tide dynamic stress in crust and its relationship with earthquakes@陆明勇$China Center for Earthquake Disaster Emergency and SAR,Beijing 100049,China @郑文衡$Huazhong University of Science and Technology,Wuhan 430074,China①Strong earthquake catalogues in China. Earthquake catalogues reported monthly by Center for Analysis and Prediction, CEA. ①YI Zhi-gang. Institute of Crustal Dynamics, China Earthquake Administrati…     

Ground deformation of Nisyros Volcano (Greece) for the period 1995–2002: Results from DInSAR and DGPS observations

Differential GPS (DGPS) and Differential Interferometric Synthetic Aperture Radar (DInSAR) analyses were applied to the Kos-Yali-Nisyros Volcanic Field (SE Hellenic Volcanic Arc) to quantify the ground deformation of Nisyros Volcano. After intense seismic activity in 1996, a GPS network was installed in June 1997 and re-occupied annually up to 2002. A general uplift ranging from 14 to 140 mm was determined at all stations of the network. The corresponding horizontal displacements ranged from 13 to 53 mm. The displacement vectors indicate that the island is undergoing extension towards the East, West and South. A two-source “Mogi” model combined with assumed motion along the Mandraki Fault was constructed to fit the observed deformation. The best-fit model assumes sources at a depth of 5500 m NW of the centre of the island and at 6500 m offshore ESE of Yali Island. DInSAR analysis using four pairs of images taken between May 1995 and September 2000 suggests that deformation was occurring during 1995 before the start of the seismic crisis. An amplitude of at least 56 mm along the slant range appeared for the period 1996 through 1999. This deformation is consistent with the two-source model invoked in DGPS modelling. Surface evidence of ground deformation is expressed in the contemporaneous reactivation of the Mandraki Fault. In addition, a 600 m long N-S trending irregular rupture in the caldera floor was formed between 2001 and 2002. This rupture is interpreted as the release of surface stress in the consolidated epiclastic and hydrothermal sediments of the caldera floor.     

Studies on wind environment around high buildings in urban areas

High buildings or architectural complex in urban areas remarkably distort the urban surface wind fields. As the air flow approaches,local strong wind may appear around the buildings. The strong wind makes the pedestrians on sidewalks, entrances and terrace very uncomfortable and causes the pedestrian level wind environment problem. In this studies, hot-wire wind measurement, wind scouring in wind tunnel and numerical computation were carried out to evaluate the wind environment of tall buildings in the prevailing flow conditions in Beijing areas. The results obtained by three techniques were compared and mutually verified. The conclusions drawn from three approaches agree with each other. Also the advantages and limitations of each method were analyzed. It is suggested that the combination of different techniques may produce better assessment of wind environment around high buildings.     

云南省祥(云)-临(沧)公路红土坡隧道变形原因及加固方案

云南省祥(云)-临(沧)公路红土坡隧道，在施工过程中变形严重，洞内数次冒顶、产生地面陷落，并诱发滑坡，严重影响了施工进度并造成较大经济损失。文章根据现场勘查及变形监控量测资料，详细论述了隧道变形特点，从地层岩性、构造、地应力条件、地下水作用、施工工艺、滑坡影响等方面综合分析了隧道变形原因。红土坡隧道变形是软弱的地层岩性、地应力条件改变、地下水作用、施工工艺以及滑坡偏压等各种因素共同作用的结果。且隧道变形诱发滑坡，滑坡又促使隧道进一步变形。基于此，文章提出了首先对滑坡进行支挡，再对隧道围岩进行加固的整治思路，并提出具体工程方案。整治工程实施后，红土坡隧道变形已得到完全控制，取得良好的治理效果。     

The migration of fluid-filled grain boundaries in recrystallizing synthetic bischofite: first results of in-situ high-pressure, high-temperature deformation experiments in transmitted light

The effect of fluids on recrystallization behaviour is well known; however, the detailed microscale distribution of fluid in grain boundaries and the influence of fluid on grain boundary migration are still unresolved. In this study, in‐situ deformation experiments in transmitted light microscopy were undertaken, as this allows continuous and direct observation of the whole range of processes involved in fluid‐assisted grain boundary migration. A new see‐through deformation apparatus was developed to enable the control of fluid pressure. Bischofite containing small amounts of aqueous fluid was deformed at temperatures between 50 and 90 °C, over a range of fluid pressure from 0.5 to 1 MPa, and strain rates of 5 × 10^?6 to 1 × 10^?4 s^?1. The rates of grain boundary migration were measured at different temperatures and strain rates. Detailed observations during and after the deformation illustrate the evolution of migrating fluid‐filled grain boundaries and show that the incorporation of fluids from inclusions as well as their pinch‐off is dependent on the grain boundary velocity, the thickness of the grain boundary and the size and shape of the inclusions. Direct evidence is presented for the contraction of the grain boundary fluids into isolated inclusions after equilibrium conditions are attained.     

Deep structure of the northeastern Japan arc and its implications for crustal deformation and shallow seismic activity

Seismic tomography studies in the northeastern Japan arc have revealed the existence of an inclined sheet-like seismic low-velocity and high-attenuation zone in the mantle wedge at depths shallower than about 150 km. This sheet-like low-velocity, high-attenuation zone is oriented sub-parallel to the subducted slab, and is considered to correspond to the upwelling flow portion of the subduction-induced convection. The low-velocity, high-attenuation zone reaches the Moho immediately beneath the volcanic front (or the Ou Backbone Range) running through the middle of the arc nearly parallel to the trench axis, which suggests that the volcanic front is formed by this hot upwelling flow. Aqueous fluids supplied by the subducted slab are probably transported upward through this upwelling flow to reach shallow levels beneath the Backbone Range where they are expelled from solidified magma and migrate further upward. The existence of aqueous fluids may weaken the surrounding crustal rocks, resulting in local contractive deformation and uplift along the Backbone Range under the compressional stress field of the volcanic arc. A strain-rate distribution map generated from GPS data reveals a notable concentration of east–west contraction along the Backbone Range, consistent with this interpretation. Shallow inland earthquakes are also concentrated in the upper crust of this locally large contraction deformation zone. Based on these observations, a simple model is proposed to explain the deformation pattern of the crust and the characteristic shallow seismic activity beneath the northeastern Japan arc.