洋浦近岸海域污染控制规划方案优化——Ⅰ.排污口位置优选

在洋浦近岸海域计算潮流场基础上,计算预选排污口附近海水质点运动轨迹及预测污染物浓度分布,最后,从环保角度出发,推荐了洋浦地区各开发区的排污口位置,为洋浦近岸海域污染控制规划方案的制定及其优化提供了依据。     

环台湾岛海域半日潮波特征的三维模拟

用1997版POM海洋模式,首次应用于环台湾岛海域的潮波数值研究.得到该海域的半日潮波主要为23°N以南西太平洋传来的胁振潮.影响台湾海峡的半日潮波分别由海峡南北口传入的两支潮波,且北支强于南支.福建沿岸湄州湾-兴化湾为最强潮区,其M₂分潮最大振幅可达240cm.最强潮流区位于澎湖水道,M₂分潮最大潮流达196cm/s.环台湾岛海域潮波潮流水平结构上除海峡北部原有一个圆流点外,还发现另外存在4个新的圆流点.潮流垂直结构上主要为右偏,接近底层处为左偏.     

Wave group statistics from numerical simulations of a random sea

Two commonly used methods of simulating random time series, given a target power spectrum, are discussed. Wave group statistics, such as the mean length of runs of high waves, produced by the different simulation schemes are compared. The target spectra used are obtained from ocean measurements, and cover a wide range of ocean conditions. For a sufficiently large number of spectral components, no significant differences are found in the wave group statistics produced by the two simulation techniques.     

胶州湾泛亚码头疏浚方案优选及悬浮物影响预测

采用有限元分步杂交方法,在已建潮流场的基础上,建立了胶州湾疏浚物悬浮泥沙的二维输运-扩散模型,并应用于胶州湾前湾港区泛亚码头工程疏浚区的疏浚物输运扩散的数值模拟预测。根据预测结果分析了泛亚码头疏浚区施工期间悬浮泥沙对附近海域水环境和生态环境的影响,并对不同的疏浚方案进行了优选。     

Numerical Simulation of Non-Linear Wave Propagation in Waters of Mildly Varying Topography with Complicated Boundary

In this paper, the characteristics of different forms of mild slope equations for non-linear wave are analyzed, and new non-linear theoretic models for wave propagation are presented, with non-linear terms added to the mild slope equations for non-stationary linear waves and dissipative effects considered. Numerical simulation models are developed of non-linear wave propagation for waters of mildly varying topography with complicated boundary, and the effects are studied of different non-linear corrections on calculation results of extended mild slope equations. Systematical numerical simulation tests show that the present models can effectively reflect non-linear effects.     

Review of resource analysis and related studies: Working group,Mathematical Geology,freie Universität Berlin

The working group Mathematical Geology of the Freie Universität Berlin was formed in 1971. We review quantitative methods used by the working group since 1983 to treat mineral exploration problems. The methods applied vary from elementary statistical analysis of multivariate exploration data to optimal strategies for selecting favorable targets, and from multiobjective decision-making for additional drill hole locations to expert systems in exploration.The methods applied are directly related to the level of information at each stage of the exploration process. Special emphasis was placed on the relationship between and evaluation of subjective and objective data. Case studies illustrating the various methods are presented for different kinds of mineral deposits and exploration environments.     

GALILEO系统仿真与分析

本文着重阐述了GALILEO仿真系统星座和误差模型的构建过程,利用该系统进行DOP值分析并通过定位解算验证了GALILEO系统的性能指标。通过与GPS系统性能指标进行比较,得出GALILEO系统的星座设计具有较好的DOP值分布特性,定位精度优于GPS定位精度。在进行差分定位时,其误差贡献比较大的是接收机噪声和卫星钟差,因此提高差分定位的关键是降低接收机的噪声水平和提高卫星钟差预报精度。     

Effect of Multipoint Heterogeneity on Nonlinear Transformations for Geological Modeling： Porosity-Permeability Relations Revisited

An analysis of statistical expected values for transformations is performed in this study to quantify the effect of heterogeneity on spatial geological modeling and evaluations. Algebraic transformations are frequently applied to data from logging to allow for the modeling of geological properties. Transformations may be powers, products, and exponential operations which are commonly used in well-known relations (e.g., porosity-permeability transforms). The results of this study show that correct computations must account for residual transformation terms which arise due to lack of independence among heterogeneous geological properties. In the case of an exponential porosity-permeability transform, the values may be positive. This proves that a simple exponential model back-transformed from linear regression underestimates permeability. In the case of transformations involving two or more properties, residual terms may represent the contribution of heterogeneous components which occur when properties vary together, regardless of a pair-wise linear independence. A consequence of power- and product-transform models is that regression equationswithin those transformations need corrections via residual cumulants. A generalization of this result isthat transformations of multivariate spatial attributes require multiple-point random variable relations. This analysis provides practical solutions leading to a methodology for nonlinear modeling using correct back transformations in geology.     

智能全站仪在大型压力容器焊接变形监测中的应用

在大型压力容器的部件焊接过程中,由于预热、焊接等工艺流程会导致各部件产生变形,从而引起部件之间的位置关系产生变化。为保证压力容器成品满足设计要求,必须在制造过程中实施变形监测,依据变形数据适当调整焊接工艺流程,控制变形量。提出采用智能全站仪配以自动变形监测软件对大型压力容器焊接变形进行实时监测,并应用于生产实践中,监测结果表明该方法自动化程度高、实时性好,能同时给出位置和姿态变形数据。     

基于DEM的SAR图像模拟

首先阐述了研究基于数字高程模型(DEM)的SAR图像模拟的重要性。然后针对SAR图像的几何特点,并顾及地面坡度、成像距离等因素对雷达波后向散射强度的影响,设计了基于强度积分的SAR图像模拟方案。根据Leberl构像模型计算SAR图像的像点坐标,采用强度积分策略对各点处的强度进行模拟,并进行归一化处理。通过仿真实验得到了满意的SAR模拟图像,验证了该模拟方案的正确性和有效性。