黔西地区构造变形特征及其煤层气地质意义

黔西地区处于特提斯与滨太平洋两个构造域的交接地带,多期性质不同的构造作用形成了现今错综复杂的构造变形特征。根据构造变形的差异,可划分为织金-纳雍NE向构造变形区、水城-紫云NW向构造变形区和黔西南复杂构造变形区。在野外地质的基础上,结合微观变形特征和矿物流体包裹体测试分析,认为黔西地区构造变形属于上地壳低温-中低温环境下的脆性-脆韧性变形;由于黔西地区基底构造相对稳定,成煤期后断块内部变形较弱,煤储层形成了一定程度的构造裂隙,有助于渗透率的提高,煤层气勘探开发前景良好。     

Structural analysis of a newly emerged accretionary prism along the Jinlun-Taimali coast,southeastern Taiwan: From subduction to arc-continent collision

In southern Taiwan the initial collision of the Luzon volcanic arc with the passive continental margin of China results in the emergence of an accretionary prism of, predominantly, turbidites in composition, thus providing an appropriate place to study the temporal and spatial variation of deformation during the transition of subduction to arc-continent collision. Field surveys have recently been carried out in slightly metamorphosed rocks along the well-exposed Jinlun-Taimali coast in southeastern Taiwan. Three folding phases are identified in the area. The first phase is characterized by gently dipping but widely distributed phyllitic cleavage (S₁). The second phase is represented by sparsely distributed crenulation cleavage (S₂) that folded the phyllitic cleavage. The third phase is characterized by E–W trending antiforms (F₃) that involved both types of pre-existing cleavages. Restoration of such an antiform in the north using a method proposed in this paper reveals that phyllitic cleavage in the overturned beds dips gently towards the southeast or east-southeast before the antiform, in relation to the first-phase thrusting or folding under regional ESE-WNW compression. From the first to third phase, the maximum horizontal compression underwent an about 90° anticlockwise rotation from ESE-WNW to E–W or NE–SW to N–S, and the deformation depth seems to decrease drastically, in terms of the decreasing proportion of pervasive deformation. All these variations are attributed to the oblique arc-continent collision that exhumed the whole accretionary prism and induced a local stress perturbation in southeastern Taiwan.     

Andean earthquakes triggered by the 2010 Maule,Chile (Mw 8.8) earthquake: Comparisons of geodetic,seismic and geologic constraints

The Maule, Chile, (M_w 8.8) earthquake on 27 February 2010 triggered deformation events over a broad area, allowing investigation of stress redistribution within the upper crust following a mega-thrust subduction event. We explore the role that the Maule earthquake may have played in triggering shallow earthquakes in northwestern Argentina and Chile. We investigate observed ground deformation associated with the M_w 6.2 (GCMT) Salta (1450 km from the Maule hypocenter, 9 h after the Maule earthquake), M_w 5.8 Catamarca (1400 km; nine days), M_w 5.1 Mendoza (350 km; between one to five days) earthquakes, as well as eight additional earthquakes without an observed geodetic signal. We use seismic and Interferometric Synthetic Aperture Radar (InSAR) observations to characterize earthquake location, magnitude and focal mechanism, and characterize how the non-stationary, spatially correlated noise present in the geodetic imagery affects the accuracy of our parameter estimates. The focal mechanisms for the far-field Salta and Catamarca earthquakes are broadly consistent with regional late Cenozoic fault kinematics. We infer that dynamic stresses due to the passage of seismic waves associated with the Maule earthquake likely brought the Salta and Catamarca regions closer to failure but that the involved faults may have already been at a relatively advanced stage of their seismic cycle. The near-field Mendoza earthquake geometry is consistent with triggering related to positive static Coulomb stress changes due to the Maule earthquake but is also aligned with the South America-Nazca shortening direction. None of the earthquakes considered in this study require that the Maule earthquake reactivated faults in a sense that is inconsistent with their long-term behavior.     

Review of the chronostratigraphic charts in the Sinú-San Jacinto basin based on new seismic stratigraphic interpretations

Disperse and punctual studies; absence of integration of data ranging from local to regional focus; interpretations based only on lithostratigraphic features; and interpretation of data premised on an allochthonous origin of the Caribbean plate, are some of factors that increase the confusion and uncertainty in understanding the Sinú-San Jacinto Basin. The sedimentary record of Upper Cretaceous to Eocene has been traditionally interpreted as the record of deep-water settings. However, recently these sediments have been related to shallow marine and deltaic settings. Second problematic point is about the deposition environment of the Oligocene to Late Miocene succession. Some studies suggest canyons, turbidites and sediments deposited in deep-water settings. However, recent studies propose deltaic and shallow marine settings. The last stratigraphic problem is related to the controversial fluvial vs. shallow marine interpretations of the Pliocene sediments. Based upon seismic stratigraphic analysis in recent and reprocessed 2D seismic data, integrated with well data, we propose chronostratigraphic charts for the northern, central and southern zones of the Sinú-San Jacinto Basin. Twenty seismic facies based on amplitude, continuity, frequency and geometry of seismic reflectors and twelve seismic sequences were recognized. The seismic stratigraphic analysis in this study suggests that the sediments of Upper Cretaceous to Paleocene/Eocene were associated to continental to shallow marine settings. Lagoons, coastal plain and carbonate platform dominated during this period. The Oligocene to Middle Miocene record was characterized by deep-water deposition, whereas the Late Miocene to recent sedimentation was characterized by falling base level, characterized by deltaic and fluvial deposits. Five syn-rift sequences with wedge-shaped geometry were identified in this study. Three Triassic to Jurassic syn-rift sequences were characterized by seismic facies typical of fluvial to lacustrine and flood plain sedimentation. Two Cretaceous to Paleocene syn-rift sequences were characterized by seismic facies related to lagoons to coastal plain settings. Normal high-angle faults with a northeast-southwest direction related to rifting processes controlled the development of these sequences. The sheet-drape post-rift section was characterized by passive margin settings in the northern part of the Sinú-San Jacinto Basin and by diachronic tectonic inversion of older normal faults during Cenozoic, predominantly in the central and southern zones. The stratigraphic record related to the Mesozoic to Early Cenozoic rifting; the shallow marine sedimentation during Eocene and the tectono-stratigraphic continuity across the northern Colombia and northwestern Venezuela is coherent and well explained by the in situ origin of the Caribbean plate and is not explained by the “allochthonous” model.     

芦山地震同震和震后地表形变及重力变化的理论模拟

为了研究芦山地震的孕震过程和震源区的长期构造过程以及解释实测的震后形变和重力资料, 采用分层介质模型, 利用数值模拟的方法, 考虑区域流变系数, 计算了地震引起的地表同震、震后的形变和重力变化以及区域内部分GPS与重力连续观测台站的震后形变和重力变化的时间序列.结果表明: 芦山地震的地表同震形变显示出发震断层明显的逆冲特性; 粘弹性松弛效应引起的震后地表形变和重力变化比同震形变和重力变化的范围明显扩大, 但随着粘滞系数的增加, 变化量明显减小; 观测台站的震后变化时变曲线显示震后形变和重力变化在震后50 a间变化显著, 100 a后基本平缓, 趋于稳定; 模拟计算的GPS台站中除了MEIG台和MYAN台以外, 其余台站的震后观测必须考虑粘弹性松弛的影响.      

姬塬地区长8油层组层序地层格架内成岩相展布特征

通过岩心观察并充分利用普通薄片、铸体薄片、阴极发光、X-衍射和扫描电镜等资料,对姬塬地区长8油层组储层的成岩作用、成岩矿物、成岩阶段和成岩演化序列特征等进行了研究。根据成岩作用类型及强度、成岩矿物等将储层划分为绿泥石衬边弱溶蚀、不稳定组分溶蚀、压实致密、高岭石充填和碳酸盐胶结5种成岩相。并通过岩心薄片资料刻度测井归纳出不同成岩相在GR、AC等测井曲线及其组合上的响应特征,由此实现各单井储层成岩相的连续划分。对长8油层组层序界面和基准面旋回与成岩相展布的关系进行了研究,结果表明层序界面附近不稳定组分溶蚀相及高岭石充填相较为发育,且各井之间对比性良好,同时层序界面也控制了碳酸盐胶结;中期基准面旋回的最大湖泛面处均发育井间可对比的压实致密相,长82中期基准面下降半旋回砂体一方面易于遭受溶蚀产生次生孔,另一方面由于受沉积驻留和碎屑组分影响导致压实强度较弱,因此物性总体比长81砂体好。     

山东张家洼矽卡岩型铁矿矿物学特征及其对成矿环境的指示意义

张家洼矽卡岩型铁矿位于华北克拉通东南部,赋存在石炭系本溪组与奥陶系马家沟组之间的假整合面处及闪长岩体与奥陶系马家沟组大理岩的接触带附近,富铁矿石资源量已达大型规模。研究发现矽卡岩矿物种类在内外接触带分布有一定区别,内带为石榴石等钙质矽卡岩矿物,而外带为阳起石、金云母等镁质矽卡岩矿物,整体构成钙镁质矽卡岩。对矽卡岩矿物系统的研究表明,透辉石及石榴石发育有环带,其氧化物含量随矿物环带的形成比例不断变化,暗示酸碱度及氧逸度随着成矿流体的演化而发生相应的变化,即由早期矽卡岩阶段的相对还原的酸性环境演化为退化蚀变阶段相对氧化的碱性环境从而导致铁质逐渐萃取多次富集、沉淀,后期随着磁铁矿的沉淀又逐渐在硫化物阶段转化为还原环境生成金属硫化物。     

新疆哈拉奇地区泥盆纪层序地层学特征及沉积环境

通过对哈拉奇地区泥盆系岩石学特征、层序地层格架、岩石地球化学特征和沉积构造的研究,对研究区泥盆纪地层进行了层序地层划分和沉积环境的恢复。研究区泥盆系划分为4个三级层序,沉积物源区主要为被动大陆边缘的再旋回造山带物源区,研究区泥盆系为无障壁滨浅海沉积环境。构造运动和海平面升降系该区泥盆系三级层序及其内部体系域形成的主要控制因素。     

自钻式原位剪切旁压模型不同固结荷载颗粒流数值试验

自钻式原位剪切旁压仪具有扰动小,能同时测出不同深度土的变形和强度参数,在精确测定土体参数方面具有广阔的应用前景。然而,目前受分析手段与研究水平的限制,对SBISP多级加载过程中周围土体的变形响应研究较少,而土体变形参数的确定与其变形机制是密切相关的。基于此,应用PFC3D颗粒流程序对不同固结荷载SBISP模型进行了仿真数值试验,试验结果表明:随着剪应力的逐级施加,中间区域颗粒的位移量不断增大,且位移矢量方向性更加显著,在第5级剪应力作用下,影响区域位移矢量形状呈现为倒锥形;而随着上覆固结压力的增大,探头周围试样的受影响范围逐渐变小;在探头作用下球颗粒的运动轨迹呈台阶状,台阶形态随距探杆中心距离增大而趋于平缓,球颗粒的Z向位移量亦随之呈负指数形式衰减;此外,剪应力与探头摩擦系数呈正相关关系,但当摩擦系数达到某一阈值时,剪应力-位移曲线不再变化。其研究成果对于深入开展SBISP试验多级加载过程中影响域内土体变形过程与变形模量之间关系研究具有重要启迪意义。     

GPS PPP技术用于滑坡监测的试验与结果分析

为了研究全球定位系统(GPS)精密单点定位(PPP)技术用于滑坡等地质灾害监测时可能达到的精度和可靠性等问题,结合某类滑坡的大型物理模型试验,在滑坡体上布设了若干GPS监测点进行连续实时动态监测,利用PPP技术对该滑坡从稳定、开始滑动直至产生破坏的全过程监测数据进行了处理与分析,并与GPS单历元差分定位、载波相位实时差分定位技术监测结果进行了对比。结果表明:GPS PPP技术监测结果的内符合精度约为10 mm,外符合精度约为40 mm,且GPS PPP技术具有一些差分GPS无法比拟的优势,如无需基准站支持、作业成本低、效率高、可直接获取监测点在国际地球参考框架下的绝对坐标等。该技术完全可用于滑坡等地质灾害的实时动态监测和预警。