山西及其邻近地区地壳垂直形变与地震危险性分析

山西及其邻近地区地壳垂直形变出现的两升三降的分布格局,反映出现代构造块体活动在不断增强.通过地震活动和区域形变场分析,可以看出山西地区自50年代以来地震释放能量有不断加强趋势,区域形变出现了有规律的四象限分布.预计今后10年内本区若干危险点有可能成为地震能量大释放地区.     

碳酸盐岩米级旋回层序的成因类型及形成机制

在前人研究及自己野外观察的基础上,本文把碳酸盐岩米级旋回层序归为四大类:深水非对称米级旋回层序、L-M米级旋回层序、潮下碳酸盐米级旋回层序、潮坪碳酸盐米级旋回层序。米级旋回层序的形成机制是与米兰柯维奇旋回有关的高频率海平面振荡变化旋回所形成的间断-加积旋回沉积作用,它们的识别标志主要是岩石类型、界面特征、产出环境等。碳酸盐岩米级旋回层序的规则的垂直叠加形式是识别三级旋回层序的基础。     

Active deformation in the Vrancea region,Rumania

Recent and historical seismicity as well as reliable fault plane solutions are used to study the active deformation caused by the occurrence of intermediate depth (60–170 km) earthquakes of the Vrancea region, Rumania. In this area, located in the southeastern part of the Carpathian arc, the westward subduction of the Carpathian trench has terminated, leaving continental lithosphere, at present, at the arc. The principalT axis of the intermediate depth events trends N159°E and has a plunge of 74°, which is the same as the dip of the subducted plate. TheP axis has a trend of 314° and a shallow plunge of 15°. The analysis of the moment tensor of six focal mechanisms showed that the dominant mode of deformation of the subducted lithosphere is a down-dip extension at a rate of about 2 cm/yr, based on seismicity data.     

Strain segmentation and lateral membrane deformation rate of the subducted Ryukyu slab

Abstract Focal mechanisms of intermediate-depth earthquakes within the subducted Ryukyu slab indicate a systematic pattern of down-dip extension in the northern part under Kyushu. These mechanisms switch rapidly around the Tokara channel to down-dip compression in the southern part toward Taiwan. This intriguing pattern of strain segmentation, together with the differences between the slab geometry of the northern and southern parts, has raised the question of whether stress segmentation, as defined possibly by a tear fault, might exist in the slab. However the Ryukyu trench has a concave oceanward shape in the northern segment while it is convex in the southern oceanward part toward Taiwan. The inflection zone is located around the Tokara channel. The concept of Gaussian curvature of a curved surface suggests that the along-arc variation of the geometric configuration of a subducted slab is related to the shape of the trench. This is in order to accommodate the lateral membrane deformation of the slab as the oceanic lithosphere subducts from a spherical shell to the geometry delineated by the Wadati-Benioff zone. The membrane deformation regime of the subducted Ryukyu slab and its relation with the trench geometry was examined by assuming that the subduction be modelled by the flow field of a thin viscous sheet. A projection operator was utilized to compute the membrane strain-rate tensor of an arbitrary non-Euclidean surface. Numerical experiments indicated that the northern segment of the slab was dominated by lateral compression and down-dip extension and the southern part by lateral extension and down-dip compression. This transition is sharply located near the Tokara channel. These patterns were compatible with what had been observed from studies of focal mechanisms, suggesting that the strain segmentation might be controlled, at least in part, by the lateral membrane deformation within the slab due to the trench shape in this subduction zone. The slab geometry was predicted by minimizing the integrated total dissipation power; this revealed distinct features that were consistent with observations. This implies that the slab geometry may also be affected by the membrane deformation in a systematic fashion.     

冀东太古宙高级变质岩区若干地质问题的研究

在1∶5万区域地质填图及专题研究的基础上探讨了变质岩石中的岩浆侵位变形构造、褶皱构造及变形与变质作用的关系等三个方面的问题。研究表明冀东太古宙高级区变质岩石中不同程度地发育岩浆岩构造,包括在不同类型片麻岩之间所表现的穿切构造、基性岩墙中的矿物定向构造以及基性岩体边缘及其围岩的变形构造等,褶皱构造可分为表壳岩褶皱及片麻岩褶皱,高级区可能不存在大型的片麻岩褶皱,通过镜下特征矿物相的研究并结合野外变质基性岩墙的产状及特征,建立区域变质与变形作用的关系,从而为区域地质事件表的建立提供依据。     

论塔里木地台北缘中元古宙兴地运动

在塔里木地台北缘库鲁克塔格断隆上,发现晚元古宙帕尔岗群与其下伏兴地塔格群之间为角度不整合。进一步研究了中元古宙兴地塔格群和晚元古宙帕尔岗塔格群在沉积建造、变质作用、构造样式和岩浆活动等方面的差异,证明中元古宙末期曾发生强烈构造运动——兴地运动。它在1.3～1.4Ga达到高潮,0.95～1Ga时结束,形成塔里木地台基底。根据构造要素的叠加关系和变形特征,将这次构造运动划分为三个变形幕。     

2011年日本MW9.0地震对沂沭断裂带及其两侧地区地壳运动的同震影响研究

2011年日本M_W9.0地震（简称日本地震）后沂沭断裂带及其两侧地区地震活动显著增强,研究日本地震对该地区地壳运动及地震潜势的影响十分必要.为此,本文通过112个连续GPS观测站获取了研究区高空间分辨率的日本地震同震形变场并得到如下认识：（1）8个定点地球物理观测的同震响应验证了本文同震形变场的可靠性;日本地震的东向拉张使研究区整体上处于张性同震应变状态,但存在局部挤压区域,其中莱州湾至海州湾的挤压条带穿过沂沭断裂带并对断裂带南北两段产生了不同的同震作用,对南段具有拉张作用,对北段产生挤压作用;（2）同震形变场在鲁东隆起和鲁西断块产生了显著的剪应变,地震b值显示上述区域的构造应力在日本地震后增强,因此同震形变场可能改变了这些区域的应力特征;（3）地震矩张量叠加分析显示,同震形变场短期内对鲁西断块、鲁东隆起区和沂沭断裂带南段累积了地震矩,可能有助于上述区域在日本地震以后的地震活动增强;日本地震对沂沭断裂带北段的地震矩具有释放作用,或许是该区域地震活动减弱的原因.     

天山造山带及邻区孕震应力场及断裂带活动性特征的数值实验分析

天山造山带构造环境复杂,活动断裂带和强震分布广泛,且主要分布于阿尔泰山、天山、西昆仑—帕米尔弧形构造带上,尤以天山地区最为集中.迄今为止,天山造山带地区的主要断裂带的活动特征与孕震应力场特征之间的动力学机理尚未有清晰的认识.本文以GPS等实际观测数据为约束,建立有限元数值模型,计算了研究区域地壳形变、应力/应变积累速率、弹性应变能密度以及库仑应力变化率等关键因素.模拟计算结果显示地表速度场与研究区域实际GPS观测值基本一致,且主要断裂带上弹性应变能密度分布与实际地震活动性也基本吻合,验证了数值模型和结果的可靠性.结合最新的观测和数值模拟结果分析发现,研究区的断层和地震活动性主要受控于近南北向的主压应力,与主要观测特征相一致.同时,帕米尔高原北部边界带—塔什库尔干断裂（TKF）、天山造山带南边界的东侧—迈丹断裂（MDF）、兴地断裂（XDF）库仑应力增大明显,在未来强震发生的可能性较高,应予密切关注.     

Numerical simulation of dynamic process of the Tangshan earthquake

In this paper, the new LDDA (Lagrangian Discontinuous Deformation Analysis) method is used in modeling the dynamic process of the MS=7.8 Tangshan earthquake on July 28, 1976 and obtain directly the dynamic and quasi-static dislocations, shear stress drops, fracture velocities of the Tangshan earthquake fault. The simulation shows that the slip history at each point of the fault is different. The displacement vectors at the concave side of the fault is greater than that of the convex side of the fault. The "over shoot" of the fault slip is greatest at the middle part of the fault and attenuates to its ends. The rupture velocities of the fault from the epicenter towards south-west and towards north-east are 3.08 m/s and 1.18 m/s, respectively, the average one is 2.13 m/s. The maximum dynamic and quasi-static dislocations are 7.1 m and 6.2 m respectively, the average quasi-static one on the fault is 4.5 m. The maximum dynamic and quasi-static shear stress drops are 8.1 MPa and 5.4 MPa, respectively, the average quasi-static shear stress drop is 3.9 MPa.We found that the rupture velocities and shear stress are related to the initial stress states of the fault.