Penetration response of spudcans in layered sands

The behaviour of spudcan foundations during the installation and preloading in two-layer sand sediments was investigated through large deformation finite element (LDFE) analyses. The LDFE analyses were carried out using the coupled Eulerian-Lagrangian approach, modifying Mohr-Coulomb soil model to capture hardening and subsequent softening effects of sand. Parametric analyses were undertaken varying the top layer thickness, relative density of sand and spudcan diameter. Both loose to medium dense-over-dense and dense-over-loose to medium dense sand deposits were explored. The results showed that, for the investigated relatively thin top layer thickness of ≤ 5 m, spudcan behaviour was dictated by the bottom sand layer with a minimal influence of the top layer. For assessing the penetration resistance profile in two-layer sands, the performance of the ISO, SNAME, InSafeJIP, and other existing theoretical design methods were evaluated.     

Characteristics of breaking irregular wave forces on a monopile

The substructures of offshore wind turbines are subjected to extreme breaking irregular wave forces. The present study is focused on investigating breaking irregular wave forces on a monopile using a computational fluid dynamics (CFD) based numerical model. The breaking irregular wave forces on a monopile mounted on a slope are investigated with a numerical wave tank. The experimental and numerical irregular free surface elevations are compared in the frequency-domain for the different locations in the vicinity of the cylinder. A numerical analysis is performed for different wave steepness cases to understand the influence of wave steepness on the breaking irregular wave loads. The wave height transformation and energy level evolution during the wave shoaling and wave breaking processes is investigated. The higher-frequency components generated during the wave breaking process are observed to play a significant role in initiating the secondary force peaks. The free surface elevation skewness and spectral bandwidth during the wave transformation process are analysed and an investigation is performed to establish a correlation of these parameters with the breaking irregular wave forces. The role of the horizontal wave-induced water particle velocity at the free surface and free surface pressure in determining the breaking wave loads is highlighted. The higher-frequency components in the velocity and pressure spectrum are observed to be significant in influencing the secondary peaks in the breaking wave force spectrum.     

A modified numerical calculation method of collapse pressure for thick-walled offshore pipelines

Considering the shear deformation and thickness stretching of large deformation, a modified numerical calculation method based on the thick shell theory is established to determine the collapse pressure of thick-walled pipes. Verification experiments are conducted on ten pipe specimens in hyperbaric chambers. The good agreement between experimental results and numerical predictions shows the validity and reliability of the new numerical calculation method. Combining DNV specification, the characteristic collapse pressure is also calculated for comparison. The difference between experimental results and DNV calculations illustrates the latter one is much conservative in predicting collapse pressure for thick-walled pipes. Sensitivity analysis on manufacturing imperfections and material properties is investigated for pipes with different D/t ratios. Thick-walled pipes are easier to be affected by initial ovality, residual stress and hardening factor. Based on the stress distribution at the moment of collapse, a novel discovery is found that the collapse pressure of thick-walled pipes is dominated by material plastic behavior.     

南海东北部陆架边缘第四纪高分辨率层序地层和沉积体系演化及其控制因素

The northeastern shelf margin of the South China Sea(SCS) is characterized by the development of large scale foresets complexes since Quaternary. Based on integral analysis of the seismic, well logging and paleontological data, successions since ～3.0 Ma can be defined as one composite sequence, consist of a set of regional transgressive to regressive sequences. They can be further divided into six 3 rd order sequences(SQ0–SQ5) based on the Exxon sequence stratigraphic model. Since ～1.6 Ma, five sets of deltaic systems characterized by development of wedge-shaped foresets complexes or clinoforms had been identified. High-resolution seismic data and the thick foresets allowed further divided of sub-depositional sequences(4 th order) of regression to transgression, which is basically consistent with published stacked benthic foram O-isotope records. Depositional systems identified in the study area include deltaic deposits(inner-shelf deltas and shelf-edge deltas), incised valleys, and slope slumping massive deposits. Since ～1.6 Ma, clinoforms prograded from the southern Panyu Lower Uplift toward the northern Baiyun Depression, shelf slope break migrated seaward, whereas the shelf edge of SQ0 migrated landward. The development of incised valleys in the continental shelf increased upward,especially intensive on the SB3 and SB2. The slumping massive deposits increased abruptly since SB2, which corresponds to the development of incised valleys. The evolution of depositional systems of continental slope mainly controlled by the combined influence of sea level changes, tectonic movements, sediment supply and climate changes. Since ～3.0 Ma, relative sea level of the northern SCS had been experienced transgression(～3.0 Ma BP) to regression(～1.6 Ma BP). The regional regression and maximum transgressions of the composite sequences were apparently enhanced by uplift or subsidence related to tectono-thermal events. In addition,climatic variations including monsoon intensification and the mid-Pleistocene transition may have enhanced sediment supply by increasing erosion rate and have an indispensable influence on the development of the incised valleys and 5 sets of deltaic systems since ～1.6 Ma.     

南大西洋两岸盆地海相烃源岩特征与控制因素

南大西洋两岸盆地漂移期层系油气资源十分丰富,通过对两岸重点盆地漂移期主力烃源岩发育层位、生烃潜力、识别特征和分布范围对比分析,明确两岸发育早、晚两套主力海相烃源岩。其中,晚期的赛诺曼-土仑阶海相烃源岩分布范围较广。整体上,两岸北段和赤道段盆地漂移期主力烃源岩地化指标优于中段和南段盆地,西非一侧海域盆地烃源岩地化指标优于南美一侧盆地。在对重点钻井的矿物元素化验分析、沉积相和古地理分析基础之上,总结了局限海湾的古地理背景和沉积相带类型控制优质海相烃源岩发育程度和分布范围的规律,并进一步指出南大西洋两岸北段和赤道段盆地漂移期成熟生烃灶平面分布范围内的深水沉积砂体是主要有利勘探方向,以找油为主,中段含盐盆地内紧邻盐微盆的漂移期深水沉积砂体勘探潜力次之。     

环渤海区域及邻区现今地壳构造运动形变特征分析

将环渤海区域划分为5个次级块体,利用整体旋转与线性应变模型分析2009~2014年中国大陆构造环境监测网络的GPS对地观测速度场数据,得到相对于欧亚板块0.5°×0.5°的水平运动速度场和应变场。分析形变速度场和应变场的空间变化发现,环渤海区域整体上呈现0.25×10^-9/a的NW-SE 111.3°的双向趋势性扩张运动,太行块体、山西块体分别呈NW-SE 116.3°、NW-SE 130°的微弱扩张运动,胶辽块体、冀鲁块体和阴山-燕山块体分别存在NW-SE 144.3°、NE-SW 39.5°和NW-SE 155.6°的微弱压缩运动,其中太行块体的扩张运动量级相对于其他次级块体较大。尽管环渤海区域内部各次级块体的形变在空间上存在以上差异,但整体上环渤海区域主压应变轴方向基本为NEE-SWW,主张应变轴方向为NNW-SSE,且主压应变轴走向为NE 47.70°～89.74°,与利用地球物理方法得到的主压应变轴优势方向大体一致,表明环渤海区域现今地壳运动相对稳定。     

函数模型与随机模型双约束的GPS-InSAR数据融合方法建立三维形变场

针对InSAR技术研究地表三维形变时监测信息不足的问题,以GPS监测信息为先验信息,建立附有随机模型约束的地表三维形变模型。考虑到SAR卫星极轨方式运行导致LOS向观测量对南北向形变不敏感的问题,以GPS南北向形变观测值作为强约束,构建三维形变解算的函数约束条件。模拟数据与西安地区实测数据的计算结果表明,基于随机模型与函数模型共同约束的地表三维形变参数最小二乘解的精度优于仅有函数模型约束或仅有随机模型约束及无任何约束的参数解精度。     

一种变形监测中中长基线的单历元模糊度解算算法

针对已有单历元模糊度解算算法只适用于短基线的情形,根据误差传播率确定模糊度精度,依据误差确定模糊度搜索空间,提出一种利用GPS双频观测信息实现中长基线下单历元模糊度固定的算法。首先,利用电离层约束法得到双差模糊度之间的线性约束条件;其次,利用变形监测中监测站点坐标近似已知的条件进行约束,反算获得近似模糊度;最后,根据监测站点已有的观测数据精度给出搜索空间,搜索固定模糊度。结果表明,该方法可以实现中长基线下单历元的模糊度固定,对实时变形监测有一定的参考价值。     

鄂尔多斯地块周缘垂直形变场负位错反演与应变积累研究

利用鄂尔多斯地块及其周缘1970～2014年的垂直形变速率场资料,借助负位错反演研究该区域长期应变积累。结果表明,地块东北缘山西断陷带中北段年均能量积累增量、剪应力强度都较高,西南缘六盘山断裂与渭河断裂西段次之;山西断陷带中南段至晋陕交界处年均剪应力强度较高且显示一定程度的能量积累;西秦岭构造区尤其西秦岭北缘断裂西段、晋冀蒙交界区也反映一定程度的能量积累特性。     

2017年南丹Ms4.0地震前后重力变化

利用广西及邻区2014~2017年流动重力观测资料,系统分析区域重力场变化及其与2017-07-15广西南丹MS4.0地震的关系,并结合GPS观测数据与地震地质调查成果,探讨区域重力场变化的时空分布特征及机理。结果表明：1）南丹M_S4.0地震前后,震区附近重力异常变化与主干断裂关系密切,反映沿控震断裂在2014~2017年间发生了引起地表重力变化效应的地壳变形和构造活动;2）差分重力图像表明,南丹M_S4.0地震前重力变化为“局部重力异常→四象限重力异常→重力反向变化发震”的过程;3）重力变化与GPS 观测反映的水平运动表明,南丹M_S4.0地震位于重力四象限分布中心部位及面压缩峰值附近,证明重力场和形变场动态变化对中强地震地点预测具有指示意义;4）天峨-南丹-环江一带是重力变化最剧烈地区,亦是水平形变面压缩过渡带,同时位于莫霍面等深线强烈变化地段、M_L3.0地震围空区、沿主断裂存在的低b值异常区。结合地震活动图像、定点前兆观测异常综合分析认为,该地区仍存在发生中强地震的可能。