渭河下游河道调整过程中的复杂响应现象

应用系统复杂响应的原理研究三门峡水库上游渭河河道调整过程,表明上游河道河床形态对基面上升所作出的响应是复杂的,弯曲系数的变化为先减小而后增大,宽深比的变化是先增大后减小,比降由先减小而后增大,最后均趋于稳定.     

THE INTRINSIC ACIDITY CONSTANTS AND SPECIFIC SURFACE AREA OF MARINE SOLID PARTICLESII. THE RELATIONSHIP BETWEEN THE INTRINSIC ACIDITY CONSTANT AND THE TERNARY SURFACE COMPLEX

This paper deals with the infrared spectra of " amino acid- clay , calcium carbonate and y-AlOOH" and " Cu (II )-clay-amino acid" model systems, and shows that the model of the ternary surface complex is M-OHLCu (L = amino acid) for marine solid particle-Cu (II)-amino acid. Study of the formation mechanism of the ternary surface complex shows that the specific surface area , and especially the intrinsic acidity constant, determine whether the ternary surface complex is easily formed, and that factor, FTSC,quantifies the relationship between the promoting effect of organics on Mt-marine solid particle ion exchange and the intrinsic acidity constant and specific surface area.     

智能全站仪在大型压力容器焊接变形监测中的应用

在大型压力容器的部件焊接过程中,由于预热、焊接等工艺流程会导致各部件产生变形,从而引起部件之间的位置关系产生变化。为保证压力容器成品满足设计要求,必须在制造过程中实施变形监测,依据变形数据适当调整焊接工艺流程,控制变形量。提出采用智能全站仪配以自动变形监测软件对大型压力容器焊接变形进行实时监测,并应用于生产实践中,监测结果表明该方法自动化程度高、实时性好,能同时给出位置和姿态变形数据。     

变形监测信息管理系统的设计与实现

介绍了GIS数据管理与图形显示的优势、组件技术,设计了变形监测数据管理系统平台,实现了变形监测数据的智能化管理、分析与预测.     

Jurassic Tectonics of North China: A Synthetic View

This paper gives a synthetic view on the Jurassic tectonics of North China, with an attempt to propose a framework for the stepwise tectonic evolution history. Jurassic sedimentation, deformation and magmatism in North China have been divided into three stages. The earliest Jurassic is marked by a period of magmatism quiescence （in 205-190 Ma） and regional uplift, which are considered to be the continuation of the “Indosinian movement” characterized by continent-continent collision between the North and South China blocks. The Early to Middle Jurassic （in 190-170 Ma） was predominated by weak lithospheric extension expressed by mantle-derived plutonism and volcanism along the Yanshan belt and alongside the Tan-Lu fault zone, normal faulting and graben formation along the Yinshan- Yanshan tectonic belt, depression and resuming of coal-bearing sedimentation in vast regions of the North China block （NCB）. The Middle to Late Jurassic stage started at 165y.5 Ma and ended up before 136 Ma; it was dominated by intensive intraplate deformation resulting from multi-directional compressions. Two major deformation events have been identified. One is marked by stratigraphic unconformity beneath the thick Upper Jurassic molasic series in the foreland zones of the western Ordos thrust-fold belt and along the Yinshan-Yanshan belt; it was predated 160 Ma. The other one is indicated by stratigraphic unconformity at the base of the Lower Cretaceous and predated 135 Ma. During this last stage, two latitudinal tectonic belts, the Yinshan-Yanshan belt in the north and the Qinling-Dabie belt in the south, and the western margin of the Ordos basin were all activated by thrusting; the NCB itself was deformed by the NE to NNE-trending structural system involving thrusting, associated folding and sinistral strike-slip faulting, which were spatially partitioned. Foliated S-type granitic plutons aged 160-150 Ma were massively emplaced in the Jiao-Liao massif east of the Tan-Lu fault zone and indicate important crustal thicken     

变形分析的神经网络技术应用实例

大型工程施工过程中的变形监测、分析与预报极为重要。变形分析建模的方法很多,神经网络技术的应用是其中之一。文中结合某深基坑工程的监测资料和工作经验,运用神经网络BP算法进行预测分析。简述BP神经网络的基本概念,介绍基坑变形分析的BP神经网络的具体模型结构,将神经网络方法预报结果与实测数据对比效果较好。该成果对生产实践具有参考价值。     

中国西部现今地壳形变与地震活动特征

以1999-2004年间中国西部地区近650个GPS站点的观测资料为基础,采用二维“高张力样条”函数内插算法获得了连续地壳形变场。结果表明,相对于稳定欧亚参考框架,中国西部现今地壳运动西强东弱,北向运动从西向东逐渐减弱,东向运动逐渐增强,青藏高原东缘及附近地区是东向运动的消减区带;主应变从西向东由压缩应变转变为拉伸应变;最大剪应变主要位于喜马拉雅地块及其东部地区;中国西部地区地震活动在空间分布上似乎集中发生在印度板块北东向挤压欧亚板块的两条共扼带内,与地壳形变场有一定对应关系,地壳形变的高应变率区为中强地震多发地带。     

经验模式分解的尺度阈值滤波在变形分析中的应用

本文将信号处理领域的经验模式分解算法应用于变形信息的提取中,通过引入阈值函数,建立了基于经验模式分解的尺度阈值滤波模型,采用优化模型确定了经验模式分解的次数。分别通过模拟试验和实测数据与小波阈值法和多项式拟合法进行了比对,分析表明:在低噪声情况下,三种方法都有一定的滤波效果;在高噪声情况下,经验模式分解的尺度阈值滤波法具有与小波阈值去噪法相等的精度,而且瞬时强噪声识别能力更好,优于多项式拟合法。     

New data on the correlation of skarn and gold mineralization at the Tardan deposit (northeastern Tuva)

Gold mineralization of the Tardan deposit is of different spatial occurrences and is related to different hydrothermal-metasomatic formations, the main ones being skarn-magnetite bodies, metasomatites of mineralized crush zones, and metasomatites of argillizitic-rock association. The formation of gold mineralization was a multistage process related to the repeated magmatism of the Tannu-Ola complex. It took place in a wide temperature range (400–150 °C), which determined the diversity of produced mineral assemblages. The gold mineralization associated with magnetite bodies shows a spatial correlation with magnesian and calcareous skarns and is localized in plagiogranites and gabbro-diorites of the Tannu-Ola complex intruded in the Late Ordovician. Gold mineralization that occurs in crush zones and along the fault sutures in moderate- and low-temperature hydrothermal-metasomatic rocks (propylites, beresites, serpentinites, and argillizites) formed somewhat later than skarns as a result of the intrusion of granite dike bodies. Comparative analysis of different types of gold mineralization showed both a change of mineral assemblages of the gold mineralization during the ore formation and some geochemical difference between gold and gold-bearing ores. In passing from early to late occurrences of native gold, its fineness decreases, the contents of admixtures correspondingly increase, and the gold composition changes. Gold of high-temperature rocks is rich in Cu (up to 17%), and gold of low-temperatures rocks has higher contents of Ag and Hg.     

基于智能体的鄱阳湖区钉螺生长模型及其模拟研究

基于复杂自适应系统理论,采用自下而上的基于智能体的建模分析方法,模拟了自然环境与钉螺生长相互作用导致的钉螺生长的主要行为特征、生命状态和数量变化,开发实现了模拟模型,同时输入实测数据进行实例模拟,结果表明该模型能够作为血吸虫病防控工作中钉螺数量估测的一种辅助实验方法和工具.