山西高凡银金矿床黄铁矿的标型特征在预测深部矿体中的应用

高凡银金矿床的黄铁矿在矿化空间上表现出:由上往下晶形{100}减少,{100)+{210}增多,X_(py),由高负值变为低负值;在单号勘探线一侧Cu、Co、Ni、K_p和爆裂温度趋于增高,As,Ag和a趋于降低;在双号勘探线一侧则显示相反的特征。分析表明,本矿床目前控制矿体仍属上部矿体,深部矿体主要位于单号勘探线一侧,且矿化较好,双号勘探线一侧深部主要显示边部矿化特征,矿化相对较弱。     

压力及流体对岩石孔隙结构与黏弹性的影响规律研究:理论模型及实验观测

地质成因和构造/热应力导致地壳岩石中的孔隙结构（裂隙和粒间孔）的变化.影响岩石黏弹性的因素包括压力、孔隙度、孔隙中包含的流体和孔隙几何形状等.相对于岩石中的硬孔隙,岩石黏弹性（衰减和频散）受软孔隙（裂隙）的影响更大.本文选取三块白云岩样本,进行了不同围压和流体条件下的超声波实验测量.利用CPEM（Cracks and Pores Effective Medium,裂隙和孔隙有效介质）模型获得了岩石高、低频极限的弹性模量,并通过Zener体（标准线性体）模型将CPEM模型拓展到全频带而得到CPEM-Zener模型,用该模型拟合岩石松弛和非松弛状态下的实验数据,本文得到平均裂隙纵横比和裂隙孔隙度以及纵波速度和品质因子随频率的变化关系.结果表明,饱水岩石的平均裂隙纵横比和裂隙孔隙度均高于饱油岩石,随着压差（围压和孔隙压力的差值）的增加,饱油岩石中的裂隙首先闭合.并且压差在70 MPa以内时,随着压差增大,岩石的平均裂隙纵横比和裂隙孔隙度在饱水和饱油时的差值增大,此时流体类型对于岩石裂隙的影响越来越显著,此外,对饱水岩石,平均裂隙纵横比随压差增加而增大,这可能是由于岩石中纵横比较小的裂隙会随压差增大而逐渐趋于闭合.在饱水和饱油岩石中,裂隙孔隙度和裂隙密度都随着压差增加而减小.通过对裂隙密度和压差的关系进行指数拟合,本文获得压差趋于0时的裂隙密度,且裂隙密度随孔隙度增大而增大,增大速率随压差增加而降低.针对饱水和饱油的白云岩样本,CPEM-Zener模型预测的纵波频散随压差增大而减小,此变化趋势和实验测得的逆品质因子随压差的变化关系基本一致,由此进一步验证了模型的实用性.本研究对岩石的孔隙结构和黏弹性分析以及声波测井、地震勘探的现场应用有指导意义.     

Remote structural health monitoring with serially multiplexed fiber optic acoustic emission sensors

Development and testing of a serially multiplexed fiber optic sensor system is described. The sensor differs from conventional fiber optic acoustic systems, as it is capable of sensing AE emissions at several points along the length of a single fiber. Multiplexing provides for single channel detection of cracks and their locations in large structural systems. An algorithm was developed for signal recognition and tagging of the AE waveforms for detection of crack locations. Laboratory experiments on plain concrete beams and post-tensioned FRP tendons were performed to evaluate the crack detection capability of the sensor system. The acoustic emission sensor was able to detect initiation, growth and location of the cracks in concrete as well as in the FRP tendons. The AE system is potentially suitable for applications involving health monitoring of structures following an earthquake Supported by: National Science Foundation, Grant number CMS-9900338     

房产测量中面积测算问题探讨

房产测量成果是为产权产籍管理、开发管理、交易管理和拆迁管理服务,是为城市规划和城市建设等提供基础数据和资料的重要基础性工作,得到全社会的关注。本文对房产测量中房屋面积测算过程经常遇到的问题进行了探讨,并提出了一些解决的建议。     

Cohesive Crack Analysis of Toughness Increase Due to Confining Pressure

Apparent fracture toughness in Mode I of microcracking materials such as rocks under confining pressure is analyzed based on a cohesive crack model. In rocks, the apparent fracture toughness for crack propagation varies with the confining pressure. This study provides analytical solutions for the apparent fracture toughness using a cohesive crack model, which is a model for the fracture process zone. The problem analyzed in this study is a fluid-driven fracture of a two-dimensional crack with a cohesive zone under confining pressure. The size of the cohesive zone is assumed to be negligibly small in comparison to the crack length. The analyses are performed for two types of cohesive stress distribution, namely the constant cohesive stress (Dugdale model) and the linearly decreasing cohesive stress. Furthermore, the problem for a more general cohesive stress distribution is analyzed based on the fracture energy concept. The analytical solutions are confirmed by comparing them with the results of numerical computations performed using the body force method. The analytical solution suggests a substantial increase in the apparent fracture toughness due to increased confining pressures, even if the size of the fracture process zone is small.     

Differences Between Mode I and Mode II Crack Propagation

Although mode I and mode II crack propagation show many similarities, in particular when analysed by linear elastic fracture mechanics, they differ significantly in the micro-structural behaviour. These differences, which are clearly noticeable in the fracture surface morphology, lead to fundamental differences in the macroscopic behaviour. Thus, mode II crack expansion under remote loading, appears to obey micro-structural scaling laws, implying that the dimensions of the process region stay essentially constant during crack expansion, rather than increasing with crack length. Therefore, expanding mode II cracks can almost reach the Rayleigh velocity, and actually also intersonic velocities. An expanding mode I crack, on the other hand, seems to obey continuum scaling laws, implying that the dimensions of the process region increase in proportion to crack length, leading to self-similar crack expansion at a velocity significantly below the Rayleigh speed and dependent on the remote load.     

“醉汉林”作为滑坡和边坡变形特征标志的意义——以陕西陇县地区为例

“醉汉林”一般被当做滑坡存在的一种标志。在陕西宝鸡地区进行地质灾害详细调查的过程中,发现变形边坡也有“醉汉林”分布。对陕西陇县郭家庄变形边坡“醉汉林”的树木倾斜角与边坡的倾角进行了测量,并结合几何学分析,认为树木倾斜角反映了边坡倾角的变化,并得出边坡倾角不断变陡是该地区边坡变形的一种主要方式的结论。研究结果表明,“醉汉林”有着多样而具体的指示意义:“醉汉林”记录了边坡变形的历史,可以作为区分滑坡与变形边坡的标志,“醉汉林”可以指示滑坡及边坡的状态,还可以判断滑坡剪出口是否存在。     

根据含超压气体裂隙震源模式讨论P波初动符号的分布

利用含超压气体裂隙震源模式［１］分析研究了Ｐ波初动符号的分布．根据理论推导,不同倾角含超压气体裂隙可分别形成Ｐ波初动符号的四象限分布图象和圆、椭圆、抛物线、双曲线等圆锥曲线形Ｐ波节线．按节线形状和失稳方式进行了地震分类．所推论的初动Ｐ波、Ｓ波振幅分布规律和地形变特征都与实际相符     

The Characteristics of Spinels in Mantle-derivedXenoliths in Cenozoic Basalts from Eastern Chinaand Their Thermal States

The colours and chemical composition variations of 160 spinels in peridotite and pyroxenite xenoliths from Cenozoic basalts in eastern China and their petrogeneses have been studied in detail. The relationships between major elements of spinels are discussed. The equilibrium temperatures, pressures and oxygen fugacities of spinels and their coexisting olivines, orthopyroxenes and clinopyroxenes have been determined using the Brey-kohler' s T-P calculation methods (1990) and Ballhaus' fo2 calculation method (1991). The relationships betweenthe composition and the equilibrium temperatures, pressures or oxygen fugacities of spinels in peridotite xenoliths from the basalts and the stable field of the spinels in the upper mantle have been shown.     

Coupled HM analysis using zero‐thickness interface elements with double nodes—Part II: Verification and application

In a companion Part I of this paper (Int. J. Numer. Anal. Meth. Geomech. 2008; DOI: 10.1002/nag.735 ), a coupled hydro‐mechanical (HM) formulation for geomaterials with discontinuities based on the finite element method (FEM) with double‐node, zero‐thickness interface elements was developed and presented. This Part II paper includes the numerical solution of basic practical problems using both the staggered and the fully coupled approaches. A first group of simulations, based on the classical consolidation problem with an added vertical discontinuity, is used to compare both the approaches in terms of accuracy and convergence. The monolithic or fully coupled scheme is also used in an application example studying the influence of a horizontal joint in the performance of a reservoir subject to fluid extraction. Results include a comparison with other numerical solutions from the literature and a sensitivity analysis of the mechanical parameters of the discontinuity. Some simulations are also run using both a full non‐symmetric and a simplified symmetric Jacobian matrix. On top of verifying the model developed and its capability to reflect the conductivity changes of the interface with aperture changes, the results presented also lead to interesting observations of the numerical performance of the methods implemented. Copyright © 2008 John Wiley & Sons, Ltd.