Principal axes of m-DOF structures PartⅠ:Static loading

This paper is the first in a two-part series that discusses the principal axes of M-DOF structures subjected to static and dynamic loads. The primary purpose of this series is to understand the magnitude of the dynamic response of structures to enable better design of structures and control modification devices/systems. Under idealized design conditions, the structural responses are obtained by using single direction input ground motions in the direction of the intended control devices/systems,and by assuming that the responses of the structure is decoupleable in three mutually perpendicular directions. This standard practice has been applied to both new and retrofitted structures using various seismic protective systems. Very limited information is available on the effects of neglecting the impact of directional couplings (cross effects - of which torsion is a component) of the dynamic response of structures. In order to quantify such effects, it is necessary to examine the principal axes of structures under both static and dynamic loading.This first paper deals with quantitative definitions of principal axes and "cross effects" of three-dimensional structures under static load by using linear algebra. It shows theoretically that, for three-dimensional structures, such principal axes rarely exist. Under static loading conditions, the cross effect is typically small and negligible from the viewpoint of engineering applications. However, it provides the theoretical base for subsequent quantification of the response couplings under dynamic loads, which is reported in part Ⅱ of this series.     

Study on dynamics of tectonic evolution in the Fushun Basin, Northeast China

The updated study shows that the taphrogenesis of basement of the Fushun Basin is not a kind of instantaneous process. It intensified gradually and went to extreme in the sedimentary stage of the Guchengzi formation, and then, it weakened rapidly and stopped soon afterwards; the depression did not take place after the taphrogenesis. On the contrary, it almost happened simultaneously with the taphrogenesis. The depression went at a high speed from the beginning of the sedimentary period of the Xilutian formation, and then weakened gradually in the sedimentary period of the Gengjiajie formation. The evolution course of the synsedimentary structure of the Fushun Basin can be summarized as the following six stages: slow taphrogenesis and high speed depression to accelerated taphrogenesis and high speed depression to high speed taphrogenesis and high speed depression to retarded taphrogenesis and high speed depression to gradual halt of taphrogenesis and reduced depression to slow depression and gradual halt of depression. The tectonic evolution resulted in the formation of the "lower taphrogenesis and upper depression" structure. The formation of the binary structure might be due to the suspension of taphrogenesis and the change of the regional structure stress field, but the depression kept going. The result of calculation combining the analysis of the synsedimentary structural frame, the back-stripping method of the subsidence history of the basin basement and the simulation of thermo-settlement history indicates that the great sedimentary space required by the "upper depression part" consists of two parts, namely, 40% from compaction of sediments and 60% from slow depression of the basin basement during a long period of time. Gradual halt of the depression in the Fushun Basin may be attributed to the reversal of the lithosphere hot-recession and gravity isostasy adjustment which may be the result of new hot-events in the depths and accompanied invasion of extremely thick diabase sill, thus revealing a new forming mechanism of "fault subsidence at the base and depression on the top" structure.     

《CT理论与应用研究》杂志新刊标和地幔速度模型的说明

在《ＣＴ理论与应用研究》杂志１９９４~２００１年本杂志“刊标”的基础上,在其上方增加了象征三维体视学成像的三角形四面体的透视图;该刊标的右下侧为医学断面成像扫描仪(包括各种Ｘ－ＣＴ机与核磁共振ＭＲＩ扫描仪等);其左下侧为三维地幔速度模型和地球核的示意图,切出有两个地幔剖面,表示纵波速度二维变化的剖面。该速度剖面系根据赵大鹏教授的理论和计算方法,按照地球上的两个大圆弧做计算和绘制的彩色图,排在本期封４:第一大圆弧,从北极经西巴基斯坦(２８°Ｎ, ６４°Ｅ)到马尔代夫群岛(３°Ｎ,７３°Ｅ);第二大圆弧从马尔代夫群岛点(３°Ｎ,７３°Ｅ)连接巴布新几内亚之南点(１２°Ｓ,１５０°Ｅ),来计算两剖面速度分布并作图的结果,其具体分布参见封４的两条彩色剖面和相应的地理位置图。由于赵教授这篇论文[１]在中国国内只有很少数图书馆收藏,在Ｅｌｓｅｖｉｅｒ Ｓｃｉｅｎｃｅ的ＥＰＳＬ网站上一般人只能查到摘要,本刊对于该地幔速度模型的制作方法和所用数据资料,该模型的优越性和特征进行了叙述,他所用的地震事件数目,多达７１２８个;用于层析反演成像的震相到时数多到近一百万条。该速度如下的特点:在所采用的速度结构中,包含用几个复杂形状的地质速度界面,如莫霍面,以及下沉板块的分界     

固体介质中弹性波传播机制的细胞自动机有限深势阱模型

分析了采用细胞自动机研究波动问题的建模方法，针对一维、均匀、各向同性固体介质中弹性纵波的微观机制，借用一经典弹簧振子模型、细胞自动机格子气模型，以及量子力学中的无限深势阱模型，建立了一个细胞自动机有限深势阱模型，从量子力学角度出发，基于介观物理和纳米概念，以微观精子的德布罗意假设为基础，利用薛定谔方程，讨论了该模型中粒子（分子组）的振动速度与粒子物质波波速之间的联系，给出了模型中的波动方程，得出ζ＝Vp（ζ为粒子振动速度，Vp为物质波纵波波速）。同时还讨论了模型中粒子的大小和能量传递问题，引入引力场，得出了能量及引力势的量子化条件，另外，对声波速度、格子气粒子振动速度和本文模型中分子组振动速度进行了比较；还对本文模型中的粒子能量分布作了分析。     

Common-Reflection-Surface Stack for Converted Waves

The finite-offset (FO) common-reflection-surface (CRS) stack has been shown to be able to handle not only P-P or S-S but also arbitrarily converted reflections. It can provide different stack sections such as common-offset (CO), common-midpoint (CMP) and common-shot (CS) sections with significantly increased signal-to-noise ratio from the multi-coverage pre-stack seismic data in a data-driven way. It is our purpose in this paper to demonstrate the performance of the FO CRS stack on data involving converted waves in inhomogeneous layered media. In order to do this we apply the FO CRS stack for common-offset to a synthetic seismic data set involving P-P as well as P-S converted primary reflections. We show that the FO CRS stack yields convincing improvement of the image quality in the presence of noisy data and successfully extracts kinematic wavefield attributes useful for further analyses. The extracted emergence angle information is used to achieve a complete separation of the wavefield into its P-P and P-S wave components, given the FO CRS stacked horizontal and vertical component sections.     

复杂介质结构中折射界面的哈格多恩原理波前成像

在城市活断层探测中 ,浅层结构常常表现为强烈的非均匀性 ,界面横向强烈起伏 ,层内速度变化较大 ,传统的基于平界面均匀层模型的折射资料处理方法不能适用。研究开发能应用于复杂介质结构中折射资料处理的方法就显得十分必要。文中基于惠更斯原理 ,用波前扩张法对波场作正演计算 ,根据哈格多恩折射波前成像原理 ,在lecomte算法和Hole有限差分计算程序的基础上 ,开发出 1种复杂介质结构中折射资料的处理方法与软件 ,并用此方法处理了福州城市活断层折射探测试验中在义序完成的 2条折射剖面资料。结果表明 :探测区浅层为 3层结构 ,分别为盖层、强风化层和基岩。基岩顶界面的埋深约为 5 8～ 5 2m ,盖层P波速度变化较大     

地震预报思路的再讨论

文中回顾了1974年提出的“块、带、源、兆、触、报”六字预报思路，并基于近20年来的研究对此进行了补充和深化。     

Seismic structural control using semi-active tuned mass dampers

This paper focuses on how to determine the instantaneous damping of the semi-active tuned mass damper (SATMD) with continuously variable damping. An off-and-towards-equilibrium (OTE) algorithm is employed to examine the control performance of the structure/SATMD system by considering the damping as an assumptive control action. The damping modification of the SATMD is carried out according to the proposed OTE algorithm, which is formulated based on analysis of the structural movement under external excitations, and the measured responses of the structure at every time instant. As examples two numerical simulations of a five-storey and a ten-storey shear structures with a SATMD on the roof are conducted. The effectiveness on vibration reduction of MDOF systems subjected to seismic excitations is discussed. Analysis results show that the behavior of the structure with a SATMD is significantly improved and the feasibility of applying the OTE algorithm to the structural control design of SATMD is also verified.     

Phénomènes karstiques fossiles et actuels au sein des formations métamorphiques silico-alumineuses de la nappe pan-africaine de Yaoundé (Sud-Cameroun)Fossil and present-time karstic phenomena in silico-aluminous metamorphic formations of the Pan-African nappe of Yaoundé (South-Cameroon)

Numerous karstic features have been recognised in the non-carbonaceous micaschists and gneisses of the Yaoundé Pan-African nappe, south of Cameroon. It is shown that their formation was controlled by the structural features of the rocks. The wells and the pipes in the bedrock outcrops point out a current karstification process, resulting from the plagioclase dissolution by the acid rain waters. Hill wall alveoli and caves, of pre-Miocene age, are exhumed features that were done by dissolution in the aquiferous underground. To cite this article: J.-P. Vicat et al., C. R. Geoscience 334 (2002) 545–550.