Origin and tectonic significance of a Mesozoic multi-layer over-thrust system within the Yangtze Block (South China)

In the Yangtze Block (South China), a well-developed Mesozoic thrust system extends through the Xuefeng and Wuling mountains in the southeast to the Sichuan basin in the northwest. The system comprises both thin- and thick-skinned thrust units separated by a boundary detachment fault, the Dayin fault. To the northwest, the thin-skinned belt is characterized by either chevron anticlines and box synclines to the northwest or chevron synclines to the southeast. The former structural style displays narrow exposures for the cores of anticlines and wider exposures for the cores of synclines. Thrust detachments occur along Silurian (Fs) and Lower Cambrian (Fc) strata and are dominantly associated with the anticlines. To the southeast, this style of deformation passes gradually into one characterized by chevron synclines with associated principal detachment faults along Silurian (Fs), Cambrian (Fc) and Lower Sinian (Fz) strata. There are, however, numerous secondary back thrusts. Therefore, the thin-skinned belt is like the Valley and Ridge Province of the North American Applachian Mountains. The thick-skinned belt structurally overlies the thin-skinned belt and is characterized by a number of klippen including the Xuefeng and Wuling nappes. It is thus comparable to the Blue Ridge Province of Appalachia.The structural pattern of this thrust system in South China can be explained by a model involving detachment faulting along various stratigraphic layers at different stages of its evolution. The system was developed through a northwest stepwise progression of deformation with the earliest delamination along Lower Sinian strata (Fz). Analyses of balanced geological cross-sections yield about 18.1–21% (total 88 km) shortening for the thin-skinned unit and at least this amount of shortening for the thick-skinned unit. The compressional deformation from southeast to northwest during Late Jurassic to Cretaceous time occurred after the westward progressive collision of the Yangtze Block with the North China Block and suggests that the orogenic event was intracontinental in nature.     

The anisotropy of magnetic susceptibility in biotite, muscovite and chlorite single crystals

The anisotropy of magnetic susceptibility (AMS) of single crystals of biotite, muscovite and chlorite has been measured in order to provide accurate values of the magnetic anisotropy properties for these common rock-forming minerals. The low-field AMS and the high-field paramagnetic susceptibility are defined. For the high-field values, it is necessary to combine the paramagnetic deviatoric tensor obtained from the high-field torque magnetometer with the paramagnetic bulk susceptibility measured from magnetization curves of the crystals. This leads to the full paramagnetic susceptibility ellipsoid due to the anisotropic distribution of iron cations in the silicate lattice. The ellipsoid of paramagnetic susceptibility, which was obtained for the three phyllosilicates, is highly oblate in shape and the minimum susceptibility direction is subparallel to the crystallographic c-axes. The anisotropy of the susceptibility within the basal plane of the biotite has been evaluated and found to be isotropic within the accuracy of the instrumental measurements. The degree of anisotropy of biotite and chlorite is compatible with previously reported values while for muscovite the smaller than previously published values. The shape of the chlorite AMS ellipsoid for all the samples is near-perfect oblate in contrast with a wide distribution of oblate and prolate values reported in earlier studies. Reliable values are important for deriving models of the magnetic anisotropy where it reflects mineral fabrics and deformation of rocks.     

新疆西达里亚T-II油藏储层三维建模研究

在新疆西达里亚T-Ⅱ油气藏的储层表征研究中,首先进行了地质及测井解释,在此基础上应用地质统计学方法进行了三维储层地质建模,建模过程中采用先建立砂层格架,再建立属性参数的“两步建模”研究思路,理论上减少了砂体与属性参数的解释矛盾与误差,提高了属性模型精确度.通过实际生产动态对属性模型进行检验,证明建模结果是正确的.     

深厚表土层地面注浆加固过程中井壁应变变化规律

分析了深厚表土层地面注浆加固过程中井壁的受力特点,介绍了金桥矿副井表土段地面注浆加固过程中井壁的应变观测结论,提出了深厚表土层井壁外注浆加固工程的井壁安全保证核心技术。     

闪长岩强风化带做高层建筑天然地基的可行性研究

借助于中国工商银行山东省分行营业办公楼的工程实践,将常规勘察与原位测试相结合,运用野外钻探、室内试验、原位测试多种手段,对闪长岩强风化带的物理力学性质进行了测试分析和深入地研究,并通过对承载力、沉降变形的验算,得出其作为高层建筑的天然地基是可行的。实践证明,与桩基础处理方案相比,节省资金近200万元,大大加快了施工进度,减少了基础施工难度,取得了巨大的经济效益与社会效益;同时,也提出了研究岩石风化带所遇到的问题:由于采取原状试样及制样难,导致对其物理力学性质了解不够。     

对目前岩石“全曲线”测试的若干看法

从电液伺服岩石压力试验机工作机理的角度,对目前岩石应力-应变全过程曲线(以下简称“全曲线”)测试中的一些问题进行了分析,提出了自己的看法,目的是为了解决“全曲线”测试的2个问题,即如何测出“全曲线”;如何使测出的“全曲线”真实反映岩石的力学特性,并将其用到工程中。     

深层水泥土搅拌桩在基坑支护中的应用

通过介绍水泥与土之间的一系列物理-化学反应,阐述了深层搅拌法加固地基土的原理[1]。结合室内试验及工程实例,介绍了深层水泥土搅拌桩重力式挡墙技术在基坑支护中的应用,对于基坑设计及施工有一定实际意义。     

黄壁庄水库副坝塌坑Ⅳ76+1槽段安全监测

介绍了黄壁庄水库副坝塌坑Ⅳ76+1槽段进行的安全监测设计及根据此设计进行的安全监测实施,根据取得的监测资料解决了一直未能确定的主要变形地层的问题,为水库的加固施工和后期的运行安全提供了一定的依据。     

深基坑复合喷锚支护技术探讨

工程实践表明,复合喷锚支护是一种有效的深基坑支护型式,它可用于土层条件差、安全性要求高、变形控制严格的基坑工程中。复合支护中锚杆为主要受力构件,竖向花管为辅助受力构件,可起到限制、减小土体变形的作用。由于竖向注浆花管的加入,花管及注浆体抗剪作用加强,使基坑的整体稳定性得以大幅度提高。探讨了复合喷锚支护整体稳定性分析方法,建议将滑动区域分为加固土和原土两部分,将锚管注浆形成的注浆体等效为一层加固土,按喷锚支护模型计算复合喷锚支护整体稳定性。     

兴山县龙王嘴边坡稳定性分析与加固设计

龙王嘴边坡系坡高达70 m、坡角达70 °的高陡岩质边坡。分析了宜-秭公路石峡段龙王嘴高边坡变形的地质条件,在定量评价龙王嘴高边坡稳定性的基础上,进行了该高边坡的施工图加固设计。根据其特点将350 m长的坡段分为A,B,C三个区,分别采取预应力锚索与锚杆加固、挂网喷射混凝土支护和喷射混凝土支护等措施,实践证明,工程治理效果良好。