南海海盆区莫霍面分布规律及其对深部钻探的意义

钻遇莫霍面是人类一直以来的梦想。深海海底是地球上离莫霍面最近的地方，目前有研究推测南海是世界上莫霍面深度最浅的海域之一，但缺乏足够的直接证据。深反射地震探测可以直接揭示岩石圈的构造形态，是莫霍面探测的重要手段。本文基于长达15000 km的深反射多道地震剖面的解释、处理、制图和分析，结合前人的研究，形成了南海海盆区莫霍面反射特征和空间分布的初步认识。① 南海东部次海盆南部早期经历了较快速扩张，岩浆供应充足，受扩张停止后岩浆活动影响较小，基底平坦，地质构造相对简单，同时洋壳地震速度结构不存在异常，且有较强的广角莫霍面反射波和可识别的地幔顶部折射波，具备莫霍面钻探的基本条件。② 南海海盆不同区域的莫霍面反射强度存在较大差异。其中东部次海盆莫霍面反射最为强烈且清晰，西北次海盆次之，西南次海盆仅有零星出现的清晰莫霍面反射且可信度不高。③ 识别南海海盆区莫霍面地震反射长度超过3500 km，首次形成了海盆区深度域莫霍面地震反射空间分布图。与重力反演的莫霍面深度相比，利用深反射多道地震计算的莫霍面深度细节更为丰富，并且可以在垂向上清晰刻画莫霍面的结构。整体上，南海海盆区莫霍面地震反射强烈和可信度高的区域中，深度较浅的区域之一是东部次海盆南部，最浅处仅约9. 5 km，其中水深4. 01 km，洋壳厚度仅5. 54 km。综合判断，东部次海盆南部是南海重要的莫霍面钻探备选区，这对南海莫霍面钻探选址具有重要意义。     

雄安新区地热地质模型探究：来自地球物理的证据

雄安新区内地热资源丰富，区内有牛驼镇地热田、容城地热田和高阳地热田，地热资源开发利用较早，但是对其深部热源机制仍未形成统一观点。为了研究雄安新区内地热田深部热源机制，在新区及外围进行了深反射地震和长周期大地电磁探测，对取得的同剖面的深反射地震和大地电磁数据进行处理和综合解释，探明了研究区从地表至莫霍面范围内地质构造和电性结构。下地壳结构在深反射地震剖面与大地电磁剖面上有很好的对应关系。电阻率低值区对应着在深反射地震剖面上存在一系列反射同相轴，且同相轴可以延续到莫霍面，电阻率高值区对应着在深反射地震剖面上无明显连续反射同相轴，尤其是在莫霍面之上呈现地震反射近似"空白区"。结合区域地热资料构建了研究区深部地热地质模型，对新区内深部地热机制进行了解释。该模型为"二元"生热模型，其热源包含两个部分，深部地幔热源和地壳放射性元素衰变生热。放射性元素衰变生热占地表热流的接近30%，而幔源热流在地表热流中的占比可达约70%。在牛驼镇下方，莫霍面以上，由于地幔热物质上涌造成下地壳上隆，幔源岩浆底侵作用于下地壳形成了局部热异常，该热异常具有低速高导的地球物理特征，认为是牛驼镇地热田和容城地热田的深部热源；以区域断裂为热通道，大地热流由深部向上传导、扩散到牛驼镇凸起和容城凸起顶部，对碳酸盐岩储水层进行加热，形成地热储层；上覆新近系沉积地层是良好的热盖层。     

船式支护在基坑中的应用

在深厚软土地区的基坑,对基坑底软土进行搅拌加固形成强度较高的底板而保证坑底稳定,侧壁采用支护桩支护保证侧壁的稳定使其不倾倒,支护桩与加固底板两者共同作用形成的船状结构支护体系类似轮船的船侧壁及船底板,以保证基坑的稳定。结合具体的工程实例,介绍了船式支护的侧壁及底板的设计方法。工程案例成功实施,监测结果表明,船式支护既可避免支护桩嵌固深度过长,又利于软土的土方施工及工程桩的保护,是安全可靠的,对类似工程有一定的参考意义。     

内蒙古正镶白旗碎斑熔岩岩石学特征及其岩相划分

白旗碎斑熔岩为不规则穹状体,可分为边缘玻质碎斑熔岩、过渡霏细碎斑熔岩、中心粒状碎斑熔岩和根部花岗斑岩四个岩性带。从玻质碎斑熔岩到粒状碎斑熔岩,斑晶碎裂度逐渐减弱,珠边结构在粒状碎斑熔岩中最发育,根部花岗斑岩与正常次火山岩相近。碎斑熔岩中钾长石有序度低,指示了岩石高温成因特征。白旌碎斑熔岩属太平洋岩系钙碱质系列,原始岩浆由来源于上地幔和下地壳熔体的混熔作用形成。     

南极长城站地区现代环境地球化学特征

本文通过环境背景值、风化壳地球化学、对流层(大气气溶胶)地球化学和人为地球化学异常,初步探讨了南极长城站地区的现代环境地球化学特征。分析表明:环境要素固有的地球化学性质、区域环境条件和自然环境演变之间具有深刻的内在联系。     

云南大地热流及地热地质问题

本文报道了云南20多个大地热流测试数据。据热流分布特点并参考前人有关资料,结合地球物理测深资料、岩石热物性与放射性生热率测试数据,对各区地壳深度范围的温度、热流配分组成作了粗略分析,划分出各有特征的若干地质-热流区。云南普遍地热偏高(滇东南小范围除外)的主要原因是新构造运动强烈;怒江以西近代岩浆活动亦强烈,具有典型的板块交汇带的基本地热特点     

Strength and stability of frictional sliding of gabbro gouge at elevated temperatures

To investigate the strength of frictional sliding and stability of mafic lower crust, we conducted experiments on oven-dried gabbro gouge of 1 mm thick sandwiched between country rock pieces (with gouge inclined 35° to the sample axis) at slip rates of 1.22 × 10^− 3 mm/s and 1.22 × 10^− 4 mm/s and elevated temperatures up to 615 °C. Special attention has been paid to whether transition from velocity weakening to velocity strengthening occurs due to the elevation of temperature.Two series of experiments were conducted with normal stresses of 200 MPa and 300 MPa, respectively. For both normal stresses, the friction strengths are comparable at least up to 510 °C, with no significant weakening effect of increasing temperature. Comparison of our results with Byerlee's rule on a strike slip fault with a specific temperature profile in the Zhangbei region of North China shows that the strength given by experiments are around that given by Byerlee's rule and a little greater in the high temperature range.At 200 MPa normal stress, the steady-state rate dependence a − b shows only positive values, probably still in the “run-in” process where velocity strengthening is a common feature. With a normal stress of 300 MPa, the values of steady-state rate dependence decreases systematically with increasing temperature, and stick-slip occurred at 615 °C. Considering the limited displacement, limited normal stress applied and the effect of normal stress for the temperatures above 420 °C, it is inferred here that velocity weakening may be the typical behaviour at higher normal stress for temperature above 420 °C and at least up to 615 °C, which covers most of the temperature range in the lower crust of geologically stable continental interior. For a dry mafic lower crust in cool continental interiors where frictional sliding prevails over plastic flow, unstable slip nucleation may occur to generate earthquakes.     

High-resolution sedimentary record of lead in the coastal mud of the East China Sea in the past one hundred and fifty years

In the East China Sea （ECS）, there are some mud areas, including the south coastal mud area, the north coastal mud area, and the mud area to the southwest of Cheju Island. X-ray fluorescence （XRF） techniques and Thermal Ionization Mass Spectrometry （TIMS） were used to study the high-resolution sedimentary record of Pb concentrations and Pb stable isotopic compositions in the past one hundred and fifty years in the coastal mud of the ECS. Pb concentrations of a ^210Pb dating S5 core in the study area have increased rapidly since 1980, and reached the maximal value with 65.08 μg/g in 2000, corresponding to the fast economic development of China since the implementation of the ＂Reform and Open Policy＂ in 1978; ^206Pb/^207Pb ratios generally had stabilized at 1.195 from 1860 to 1966, and decreased gradually from 1966 to 2000, indicating that the anthropogenic source Pb contribution to the ECS has increased gradually since 1966, especially since 1980. Pb concentrations decreased distinctly from 2000 to 2003 and ^206Pb/^207Pb ratios increased from 2001 to 2003, corresponding closely to the ban of lead gasoline from 2000 in China. From 1950 to 2003, there occurred four distinct decrease events of ^206Pb/^207Pb, possibly responding to the Changjiang River （Yangtze River） catastrophic floods in 1998, 1991, 1981 and 1954; from 1860 to 1966, there were two decrease periods of ^206Pb/^207Pb, which may respond to the catastrophic floods of Changjiang River in 1931 and 1935, and 1870. As a result of the erosion and drowning by the catastrophic floods, the anthropogenic lead accumulated in soil and water environments over a long period of time was brought into the Changjiang River, then part of them was finally transported into the ECS, which leads to changes in Pb stable isotopic composition.     

Seismic lamination and anisotropy of the Lower Continental Crust

Seismic lamination in the lower crust associated with marked anisotropy has been observed at various locations. Three of these locations were investigated by specially designed experiments in the near vertical and in the wide-angle range, that is the Urach and the Black Forrest area, both belonging to the Moldanubian, a collapsed Variscan terrane in southern Germany, and in the Donbas Basin, a rift inside the East European (Ukrainian) craton. In these three cases, a firm relationship between lower crust seismic lamination and anisotropy is found. There are more cases of lower-crustal lamination and anisotropy, e.g. from the Basin and Range province (western US) and from central Tibet, not revealed by seismic wide-angle measurements, but by teleseismic receiver function studies with a P–S conversion at the Moho. Other cases of lamination and anisotropy are from exhumed lower crustal rocks in Calabria (southern Italy), and Val Sesia and Val Strona (Ivrea area, Northern Italy). We demonstrate that rocks in the lower continental crust, apart from differing in composition, differ from the upper mantle both in terms of seismic lamination (observed in the near-vertical range) and in the type of anisotropy. Compared to upper mantle rocks exhibiting mainly orthorhombic symmetry, the symmetry of the rocks constituting the lower crust is either axial or orthorhombic and basically a result of preferred crystallographic orientation of major minerals (biotite, muscovite, hornblende). We argue that the generation of seismic lamination and anisotropy in the lower crust is a consequence of the same tectonic process, that is, ductile deformation in a warm and low-viscosity lower crust. This process takes place preferably in areas of extension. Heterogeneous rock units are formed that are generally felsic in composition, but that contain intercalations of mafic intrusions. The latter have acted as heat sources and provide the necessary seismic impedance contrasts. The observed seismic anisotropy is attributed to lattice preferred orientation (LPO) of major minerals, in particular of mica and hornblende, but also of olivine. A transversely isotropic symmetry system, such as expected for sub-horizontal layering, is found in only half of the field studies. Azimuthal anisotropy is encountered in the rest of the cases. This indicates differences in the horizontal components of tectonic strain, which finally give rise to differences in the evolution of the rock fabric.