贡嘎山东坡亚高山不同林地土壤水分特性与生态环境效应

森林土壤水分特性，包括水分的渗透与蒸发、保持与贮存等对森林生态环境都有重要意义。本文研究了长江上游贡嘎山亚高山不同森林类型土壤的水分特征及其生态环境作用，结果表明：成熟林、过熟林土壤在储水、渗透、容水、蒸发和持水特性等多数方面利于保持和改善生态环境，次生或林分单一森林类型次之，林木皆伐后最差。研究区以成熟林和过熟林为主，生态环境保护较好。尽管该区与长江上游其它地区一样同具自然地理条件差、生态环境脆弱的特征，但由于该区森林植被和环境得到了有效保护，土壤水分特性好，促进了森林生态系统的良性循环，生态环境问题得到进一步改善。     

海洋纤维增强热塑性立管极限承载拉力预测方法

海洋新型纤维增强热塑性立管因其可盘卷、耐腐蚀、耐疲劳和轻质化等优点,在深水油气开发中应用前景十分广阔。热塑性立管具有复合材料的各向异性、受力耦合效应及复杂的本构关系,且承受浮体运动和复杂海洋环境载荷,其失效模式尚未明确。针对轴对称载荷作用下纤维增强热塑性立管极限承载力问题,进行热塑性管稳态热传导和热应力的理论推导,求解了稳态温度和应力分布,首次给出了在任意温度载荷作用下管体径向位移的解析解,并直接求解其径向、轴向、环向和剪切应力。采用各向同性层Von Mises和各向异性层最大应力（Max Stress）准则或Tsai-Hill准则判定热塑性管的失效,基于应力分布、失效准则和二分法计算了热塑性管的极限载荷。温度载荷、纤维铺设角度和径厚比对管道的应力分布影响显著。不同温度载荷会改变失效指数沿径向的变化趋势,增大轴向拉力将增大热塑性管的失效指数,选用不同的失效准则在管体失效判定上存在一定的差异。热塑性管温度越低、纤维铺设角越小及径厚比越大,管道对轴向拉伸载荷的承载能力越强。     

FluBiDi – a model to estimate flood based on runoff: validation using extreme and natural basin conditions

FluBiDi is a two-dimensional model created to simulate real events that can take days and months, as well as short events (minutes or hours) and inclusive laboratory tests. To verify the robustness of FluBiDi, it was tested using a previous study with both designed and real digital elevation models. The results highlight good agreement between the models (i.e. Mike Flood, SOBEK, ISIS 2D, and others) tested and FluBiDi (around 90% for a specific instant and 95% for the complete time simulation). In the simulated hydrographs, the discharge peak value, time to peak, and water level results were accurate, reproducing them with an error of less than 5%. The velocity differences observed in a couple of tests in FluBiDi were associated with very short periods of time (seconds). However, FluBiDi is highly accurate for simulating floods under real topographical conditions with differences of around 2 cm when water depth is around 150 cm. The average water depth and velocities are precise, and the model describes with high accuracy the pattern and extent of floods. FluBiDi has the capability to be adjusted to different types of events and only requires limited input data.     

灰色关联评价在矿区地下水水质分析中的应用

利用灰色系统理论的灰色关联分析方法,根据灰色关联矩阵提供的丰富信息对地下水水质进行综合评价。通过比较分析,灰色评价方法计算过程简单方便,又充分利用获得的信息,且结果直观可靠,是多因子综合评价较好的方法。     

Effect of hysteretic smoothness on inelastic response spectra with constant‐ductility

This paper presents an efficient methodology for computing constant‐ductility inelastic response spectra. The computation of constant‐ductility spectra involves numerical root‐finding algorithms to find the strongest structure providing a desired ductility response. Smooth inelastic structural behavior is modeled using a first‐order nonlinear differential equation and the transient structural response is solved using an implicit algorithm requiring Newton iterations at each time step. For structural models with smooth hysteretic behavior (not piece‐wise linear), a simple root‐finding method involving a combination of hyperbolic fits, linear interpolation, and Newton's method converges upon the highest strength (conservative) solution with a small number of iterations. The effect of the hysteretic smoothness on the occurrence of multiple roots is examined for two near‐fault and two far‐fault earthquake records, and for two measures of ductility and for normalized hysteretic energy. The results indicate how the smoothness of the hysteretic behavior affects ductility demand and constant‐ductility response spectra. Copyright © 2010 John Wiley & Sons, Ltd.     

峰局五矿下组煤带压开采的可行性与建议

峰局五矿是多年开采的老矿。近些年，随着开采深度的不断增加和开采层次的逐渐下移，来自底部岩溶高承压水的威胁日趋严重，实际生产能力逐年下降。下组煤能否开采是关系到矿井生存与发展的大问题。作者根据多年的研究成果和工作实践，就下组煤带压开采的可行性，谈一些看法和建议。     

Cavity expansion in cross‐anisotropic rock

Schistous rock can be considered—in a first approximation—as cross‐anisotropic linear elastic material. The determination of the corresponding material constants on the basis of the laboratory investigation of rock samples often fails, as the extraction of appropriate cores proves to be unfeasible (the cores disintegrate if the schistosity is pronounced). In this paper a new method is presented to determine the material constants of a linear elastic cross‐anisotropic rock on the basis of cavity expansion field tests, e.g. with a radial jack. To this purpose, an analytic approximation for the deformation of a hydrostatically loaded cylindrical cavity in cross‐anisotropic rock is derived which serves to the inverse analysis of the material parameters. Copyright © 2010 John Wiley & Sons, Ltd.     

Spatio-temporal suspended sediment fingerprinting under different land management practices

Understanding spatio-temporal suspended sediment dynamics is more important in large watersheds due to the decisive role of local source apportionment in sediment transport and yield. The Talar River with a large mountainous watershed in northern Iran, which plays a vital role in water supply for agriculture and drinking, recently has faced quality degradation. The current study explores the relative contribution of suspended sediment sources using geochemical tracers and fingerprinting techniqu...     

Large-scale cold water dispersant effectiveness experiments with Alaskan crude oils and Corexit 9500 and 9527 dispersants

There continues to be reluctance in some jurisdictions to use chemical dispersants as a viable countermeasure for accidental oil spills. One argument used by some opponents to dispersant use is that “chemical dispersants do not work effectively in cold water”. To address this issue, the U.S. Minerals Management Service (MMS) funded and conducted two series of large-scale dispersant experiments in very cold water at Ohmsett - The National Oil Spill Response Test Facility, located in Leonardo, New Jersey in February-March 2006 and January-March 2007. Alaska North Slope, Endicott, Northstar and Pt. McIntyre crude oils and Corexit 9500 and Corexit 9527 dispersants were used in the two test series. The crude oils were tested both when fresh and after weathering. Results demonstrated that both Corexit 9500 and Corexit 9527 dispersants were 85-99% effective in dispersing the fresh and weathered crude oils tested at cold temperatures. The MMS expects that results from these test series will assist government regulators and responders in making science based decisions on the use of dispersants as a response tool for oil spills in the Arctic.     

Runoff quality prediction from small urban catchments using SWMM

The RUNOFF block of EPA's storm water management model (SWMM) was used to simulate the quantity and quality of urban storm water runoff from four relatively small sites (i.e. 5·97–23·56 ha) in South Florida, each with a specific predominant land use (i.e. low density residential, high density residential, highway and commercial). The objectives of the study were to test the applicability of this model in small subtropical urban catchments and provide modellers with a way to select appropriate input parameters to be used in planning studies. A total of 58 storm events, measured by the US Geological Survey (USGS), provided hyetographs, hydrographs and pollutant loadings for biological oxygen demand (BOD₅), total suspended solids (TSS), total Kjeldahl nitrogen (TKN) and lead (Pb), and were used for calibration of the model. Several other catchment characteristics, also measured or estimated by USGS, were used in model input preparation. Application of the model was done using the Green–Ampt equation for infiltration loss computation, a pollutant accumulation equation using a power build-up equation dependent on the number of dry days, and a power wash-off equation dependent on the predicted runoff rate. Calibrated quantity input parameters are presented and compared with suggested values in the literature. The impervious depression storage was generally found to be the most sensitive calibration parameter, followed by the Manning's roughness coefficients of conduit and overland flow, the Green–Ampt infiltration parameters and, finally, the pervious depression storage. Calibrated quality input parameters are presented in the form of regression equations, as a function of rainfall depth and the number of antecedent dry days. A total of 16 independent rainfall events were used for verification of the model, which showed a good comparison with observed data for both hydrographs and pollutant loadings. Average model predictions for the four constituent concentrations from the verification runs also showed good agreement with NURP published values in Florida and US sites. © 1998 John Wiley & Sons, Ltd.