Multi‐Element Determination of Trace Elements in Natural Water Reference Materials by ICP‐SFMS after Tm Addition and Iron Co‐precipitation

We report on an improved method for determining trace element abundances in seawater and other natural waters. The analytical procedure involves co‐precipitation on iron hydroxides after addition of a Tm spike, and measurement by inductively coupled plasma‐sector field mass spectrometry (ICP‐SFMS). The validity of the method was assessed through a series of co‐precipitation experiments, using ultra‐diluted solutions of a certified rock reference material (BIR‐1). Results obtained for four natural water reference materials (NASS‐5, CASS‐4, SLEW‐3, SLRS‐4) are in agreement with published working values for rare earth elements, yttrium, vanadium and, when available, for hafnium, zirconium, thorium and scandium. A set of proposed values with uncertainties typically better than 8% RSD is proposed for Hf, Zr and Th.     

New Chinese National Reference Materials for Hydrogen and Oxygen Isotopes in Water

The Institute of Hydrogeology and Environmental Geology, Chinese Academy of Geological Sciences recently prepared four certified reference materials for hydrogen and oxygen stable isotopes in water, which are called ‘China Standard Water' (CSW)‐HO1–HO4 (hereafter referred to as HO1–HO4). These reference materials are intended for calibration purposes and provide reference values of their relative difference in ²H/¹H and ¹⁸O/¹⁶O isotope‐amount ratios expressed in delta notation, normalised to the VSMOW–SLAP scale. The certified values of the reference materials were determined by an interlaboratory comparison of results from eleven participating laboratories. This paper describes in detail the production and certification procedure of the four reference materials. The first analytical data for the reference materials are also provided using a variety of analytical techniques, namely CO₂–H₂O equilibration and laser spectroscopy for δ¹⁸O and Cr reduction, as well as H₂–H₂O equilibration, laser spectroscopy, and high‐temperature conversion for δ²H. The reference values for materials HO1–HO4 and their associated uncertainties are assigned.     

Vegetation and climate change on the Bolivian Altiplano between 108,000 and 18,000 yr ago

A 90,000-yr record of environmental change before 18,000 cal yr B.P. has been constructed using pollen analyses from a sediment core obtained from Salar de Uyuni (3653 m above sea level) on the Bolivian Altiplano. The sequence consists of alternating mud and salt, which reflect shifts between wet and dry periods. Low abundances of aquatic species between 108,000 and 50,000 yr ago (such as Myriophyllum and Isoëtes) and marked fluctuations in Pediastrum suggest generally dry conditions dominated by saltpans. Between 50,000 yr ago and 36,000 cal yr B.P., lacustrine sediments become increasingly dominant. The transition to the formation of paleolake “Minchin” begins with marked rises in Isoëtes and Myriophyllum, suggesting a lake of moderate depth. Similarly, between 36,000 and 26,000 cal yr B.P., the transition to paleolake Tauca is also initiated by rises in Isoëtes and Myriophyllum; the sustained presence of Isoëtes indicates the development of flooded littoral communities associated with a lake maintained at a higher water level. Polylepis tarapacana-dominated communities were probably an important component of the Altiplano terrestrial vegetation during much of the Last Glacial Maximum (LGM) and previous wet phases.     

Contribution of stable isotopes to the understanding of the unsaturated zone of a carbonate aquifer (Nerja Cave, southern Spain)

We analysed the stable isotopes (¹⁸O and ²H) of rainwater and drip water within a cave (Nerja Cave) located in the unsaturated zone of a carbonate aquifer. Rainfall is more abundant and presents lower isotopic content in winter, while the volume of drip water is greater and its isotopic content is lower in summer. The flow analysis of ¹⁸O through the unsaturated zone confirms the seasonal lag between rainfall and the appearance of drip water in the cave and reveals that the unsaturated zone of the aquifer, in the sector of the cave, behaves like an inertial system with a strong capability to modulate the input signal. To cite this article: F. Carrasco et al., C. R. Geoscience 338 (2006).     

Structuration profonde des dépôts de l'Albien–Maastrichtien en Tunisie centrale : nouvelle limite de l'archipel de Kasserine et implications géodynamiques

The Albian–Maastrichtian seismic horizon analysis in central Tunisia (Gafsa–Sidi Bouzid area) using the reflection seismic sections calibrated to the well data, shows buried structures with deposit distributions and sedimentation geometries varying from the depressive to uplifted zones. Pinch outs, unconformities and hiatuses recognized on the folded high structures are caused by reactivation of the bordering faults. The Turonian–Maastrichtian unconformities correspond to the palaeogeographic limits that outline the Kasserine Islets and correspond to the N120, N180 major wrench-salt-intruded corridors and associated N90, N60 strike-slip faults. Formation of the different structures and evolution of the basins and platforms were controlled by conjugate dextral and sinistral strike-slip movements. These structures allow new palaeogeographic limits of the Kasserine Islets to be identified. To cite this article: T. Zouaghi et al., C. R. Geoscience 337 (2005).     

Generalized de Sitter solution in multi-dimensional cosmology with static internal spaces

A multi-dimensional cosmological model with space-time consisting of n(n ≥ 2) Einstein spaces M_i is investigated in the presence of a cosmological constant λ and a homogeneous minimally coupled free scalar field. A generalized de Sitter solution was found for λ > 0 and a Ricci-flat external space for the case of static internal spaces with fine tuning of parameters.     

Iron Isotopic Compositions of Geological Reference Materials and Chondrites

High‐precision iron isotopic compositions for Fe‐bearing geological reference materials and chondrites with a wide range of matrices (e.g., silicates, oxides, organic‐bearing materials) are reported. This comprehensive data set should serve as a reference for iron isotopic studies across a range of geological and biological disciplines for both quality assurance and inter‐laboratory calibration. Where comparison is available, the iron isotopic compositions of most geological reference materials measured in this study were in agreement with previously published data within quoted uncertainties. Recommendations for the reporting of future iron isotopic data and associated uncertainties are also presented. Long‐term repeat analyses of all samples indicate that highly reproducible iron isotopic measurements are now obtainable (± 0.03‰ and ± 0.05‰ for δ⁵⁶Fe and δ⁵⁷Fe, respectively).     

Quadrupole ICP‐MS: Introduction to Instrumentation,Measurement Techniques and Analytical Capabilities

The low detection limits and multi‐element capability of inductively coupled plasma‐mass spectrometry (ICP‐MS) makes it an attractive option in a wide range of environmental, medical, biological, industrial and archaeological applications. Quadrupole ICP‐MS is used to determine element concentrations in a diverse range of sample types, often very different from the geological applications for which ICP‐MS was originally developed. Whilst modern instruments are robust and capable of a high degree of automation, it is essential that users of both instrumentation and data are aware of the strengths and limitations of the technique. Many people who are now involved with the operation and application of ICP‐MS instruments are not specialists in the field, as was usually the case amongst early operators. This back‐to‐basics review is aimed at the novice user and includes a guide to ICP‐MS instrumentation and performance. Whilst solids, liquids and gases can all be measured by ICP‐MS, discussion of sample introduction is limited to liquids. Requirements for producing good quality data, including aspects of sample preparation, calibration, and methods of interference limitation are also discussed.