鲁西平邑地区磨坊沟金矿床的流体包裹体研究

选择鲁西平邑磨坊沟和梨方沟两个矿区的矿化蚀变样品,对保存于石英、方解石和萤石中的原生包裹体及氢、氧稳定同位素进行了详细的研究。研究表明,二个矿区的包裹体大小、形态相似,类型一致,均为气液两相盐水包裹体。包裹体的均一温度变化范围较宽,在120～450℃之间均有分布,但主要集中于120～260℃的范围内,可进一步分为110～150℃和170～250℃两个区间。结合显微镜下观测的载金矿物的特点,推测金矿的形成温度区间在170～250℃之间。冰点变化范围较大,在-2 8～-11 5℃之间,对应的盐度在4 65%～15 47%之间。矿体及围岩黄铁矿的δ34S值介于-0 71‰～+2 99‰之间,方解石和石英的δDSMOW值为-63‰～-70‰,δ18OSMOW值为+18 4‰～+22 2‰。以上数据表明流体来源于地幔,成矿过程中与建造水发生了混合。     

峨嵋玄武岩流体包裹体中铂钯的测定方法研究

峨嵋玄武岩同生流体包裹体在800℃爆裂后，2．0g／L NH4Cl溶液提取流体中Pt、Pd，C-410树脂富集-电感耦合等离子体质谱测定，方法相对误差小于25％。激光拉曼光谱与四级质谱测定包裹体的气液成分结果表明：流体中存在一定量的有机组分，这对Pt、Pd以有机螯合态形式进入流体提供了可能。     

Genesis of Kanggur Gold Deposit in Eastern Tianshan Orogenic Belt, NW China: Fluid Inclusion and Oxygen and Hydrogen Isotope Constraints

Abstract. Primary fluid inclusions in quartz and carbonates from the Kanggur gold deposit are dominated by aqueous inclusions, with subsidiary CO₂-H₂O inclusions that have a constant range in CO₂ content (10–20 vol %). Microthermometric results indicate that total homogenization temperatures have a wide but similar range for both aqueous inclusions (120 to 310C) and CO₂-H₂O inclusions (140 to 340C). Estimates of fluid salinity for CO₂-H₂O inclusions are quite restricted (5.9∼10.3 equiv. wt% NaCl), whereas aqueous inclusions show much wider salinity ranging from 2.2 to 15.6 equivalent wt %NaCl.
The 6D values of fluid inclusions in carbonates vary from -45 to -61 %, in well accord with the published δD values of fluid inclusions in quartz (-46 to -66 %). Most of the δ¹⁸O and δD values of the ore-forming fluids can be achieved by exchanged meteoric water after isotopic equilibration with wall rock by fluid/rock interaction at a low water/rock ratio. However, the exchanged meteoric water alone cannot explain the full range of δ¹⁸O and δD values, magmatic and/or meta-morphic water should also be involved. The wide salinity in aqueous inclusions may also result from mixing of meteoric water and magmatic and/or metamorphic water.     

鲁东南岚山头超高压变质岩流体包裹体特征与板片折返史

鲁东南岚山头含柯石英榴辉岩主要产于花岗质片麻岩内,是苏鲁超高压变质带主要榴辉岩体密集分布区之一。流体包裹体研究表明,榴辉岩矿物及细脉石英中捕获有四种类型包裹体:在超高压-高压榴辉岩相条件下捕获的 N_2±CO_2包裹体;在高压榴辉宕重结晶阶段被捕获的 CO_2-H_2O 包裹体和含子矿物高盐度 H_2O 溶液包裹体:在超高压岩石折返过程中的最晚(角闪岩相退变质甚至更晚)阶段捕获的低盐度 H_2O 溶液包裹体。利用榴辉岩矿物及脉体石英中捕获的流体包裹体相互期次关系,可以对本区超高压变质作用板片折返过程中的流体演化史进行重建。     

Microthermometric measurement of fluid inclusions and its constraints on genesis of PGE-polymetallic deposits in Lower Cambrian black rock series, southern China

Systematic microthermometric measurements of fluid inclusions in the PGE-polymetallic deposits hosted in the Lower Cambrian black rock series in southern China were performed, and the results suggest: (1) there exist two types of fluid inclusions. TypeⅠis of NaCl-H2O system with low-medium salinity, and its homogenization temperatures (Th) and salinities are 106.9- 286.4℃ and ( 0.8- 21.8) wt%NaCl eq. respectively; TypeⅡ is of CaCl2-NaCl-H2O system with medium-high salinities, and its homogenization temperatures and salinities range from 120.1℃ to 269.6℃ and ( 11.4- 31.4) wt%NaCl eq., respectively. The typeⅡ fluid inclusions have been discovered for the first time in this kind of deposits; (2) two generations of ore-forming fluids were recognized. Characteristics of fluid inclusions in the PGE-polymetallic ores and carbonate-quartz stockworks in the underlying phosphorites are almost of no difference, they may represent ore-forming fluids at the main metallogenic stage. The peak value of homogenization temperature of those fluid inclusions is about 170℃, while their salinities possess a remarkable bimodal distribution pattern with two peak values of (27-31) wt%NaCl eq. and (4-6) wt%NaCl eq. On the contrary, fluid inclusions in the carbonate-quartz veins in the hanging wall may represent ore-forming fluids at the post-metallogenetic stage. The homogenization temperatures and the peak values of salinities are mostly 130-170℃ and (12-14) wt%NaCl eq., respectively; (3) nobel gas isotopic composition analyses in combination with the microthermometric measurements of fluid inclusions suggest that the ore-forming fluids at the main metallogenetic stage were probably derived from mixing of basinal hot brines with the CaCl2-NaCl-H2O system and seawater with the NaCl-H2O system; (4) in the Early Cambrian, the basinal hot brines were trapped in the Caledonian basins, which were distributed along the southern margin of the Yangtze Craton, and where giant thick sediments were accumulated, and expelled and migrated laterally along the strata because of the pressure caused by overlying sediments. The basinal hot brines absorbed Ni, Mo, V, PGE from the surrounding rocks and were transformed into ore-bearing hydrothermal fluids with the CaCl2-NaCl-H2O system and medium-high salinities, then ascended along faults and mixed with seawater of the NaCl-H2O system, and finally PGE-polymetallic deposits or occurrences were formed in the black rock series.     

Primary Ore Mineral Assemblage and Fluid Inclusion Study of the Batu Hijau Porphyry Cu-Au Deposit, Sumbawa, Indonesia

Abstract. The Batu Hijau porphyry Cu‐Au deposit, Sumbawa Island, Indonesia, is associated with a tonalitic intrusive complex. The temperature‐pressure condition of mineralization at the Batu Hijau deposit is discussed on the basis of fluid inclusion microthermometry. Then, the initial Cu‐Fe sulfide mineral assemblage is discussed. Bornite and chalcopyrite are major copper ore minerals associated with quartz veinlets. The quartz veinlets have been classified into ‘A’ veinlets associated with bornite, digenite, chalcocite and chalcopyrite, ‘B’ veinlets having chalcopyrite bornite along vuggy center‐line, rare ‘C’ chalcopyrite‐quartz veinlets, and late ‘D’ veinlets consisting of massive pyrite and quartz (Clode et al., 1999). Copper and gold mineralization is associated with abundant ‘A’ quartz veinlets. Abundant fluid inclusions are found in veinlet quartz consisting mainly of gas‐rich inclusions and polyphase inclusions throughout the veinlet types. The hydrothermal activity occurred in temperature‐pressure conditions of aqueous fluid immiscibility into hypersaline brine and dilute vapor. The halite dissolution (Tm[halite]) and liquid‐vapor homogenization (Th) temperatures of the polyphase inclusions in veinlet quartz range from 270 to 472d?C and from 280 to 454d?C, respectively. The estimated salinity ranges from 36 to 47 wt% (NaCl equiv.). The apparent pressures lower than 300 bars are estimated to have been along the liquid‐vapor‐halite curve for the fluid inclusions having the Th lower than the Tm that trapped the brine saturated with halite, or at slightly higher pressure relative to liquid‐vapor‐halite curve for the fluid inclusions having the Th higher than the Tm that trapped the brine unsaturated with halite. The actual temperature and pressure during the hydrothermal activity at the Batu Hijau deposit are estimated to have been around 300d?C and 50 bars. At such temperature‐pressure conditions, the principal and initial Cu‐Fe sulfide mineral assemblages are thought to be chalcopyrite + bornite solid solution (bnss) for the chalcopyrite‐bearing assemblage, and chalcocite‐digenite solid solution and bnss for the chalcopyrite‐free assemblage.     

Evolution of Hydrothermal System at the Dizon Porphyry Cu-Au Deposit, Zambales, Philippines

Abstract. Evolution of hydrothermal system from initial porphyry Cu mineralization to overlapping epithermal system at the Dizon porphyry Cu‐Au deposit in western central Luzon, Zambales, Philippines, is documented in terms of mineral paragen‐esis, fluid inclusion petrography and microthermometry, and sulfur isotope systematics. The paragenetic stages throughout the deposit are summarized as follows; 1) stockwork amethystic quartz veinlets associated with chalcopyrite, bornite, magnetite and Au enveloped by chlorite alteration overprinting biotite alteration, 2) stockwork quartz veinlets with chalcopyrite and pyrite associated with Au and chalcopyrite and pyrite stringers in sericite alteration, 3) stringer quartz veinlets associated with molybdenite in sericite alteration, and 4) WNW‐trending quartz veins associated with sphalerite and galena at deeper part, while enargite and stibnite at shallower levels associated with advanced argillic alteration. Chalcopyrite and bornite associated with magnetite in quartz veinlet stockwork (stage 1) have precipitated initially as intermediate solid solution (iss) and bornite solid solution (bnss), respectively. Fluid inclusions in the stockwork veinlet quartz consist of gas‐rich inclusions and polyphase inclusions. Halite in polyphase inclusions dissolves at temperatures ranging from 360d?C to >500d?C but liquid (brine) and gas (vapor) do not homogenize at <500d?C. The maximum pressure and minimum temperature during the deposition of iss and bnss with stockwork quartz veinlets are estimated to be 460 bars and 500d?C. Fluid inclusions in veinlet stockwork quartz enveloped in sericite alteration (stage 2) consist mainly of gas‐rich inclusions and polyphase inclusions. In addition to the possible presence of saturated NaCl crystals at the time of entrapment of fluid inclusions that exhibit the liquid‐vapor homogenization temperatures lower than the halite dissolution temperatures in some samples, wide range of temperatures of halite dissolution and liquid‐vapor homogenization of polyphase inclusions from 230d?C to >500d?C and from 270d?C to >500d?C, respectively, suggests heterogeneous entrapment of gaseous vapor and hypersaline brine. The minimum pressure and temperature are estimated to be about 25 bars and 245d?C. Fluid inclusions in veinlet quartz associated with molybdenite (stage 3) are dominated by gas‐rich inclusions accompanied with minor liquid‐rich inclusions that homogenize at temperatures between 350d?C and 490d?C. Fluid inclusions in vuggy veinlet quartz associated with stibnite (stage 4) consist mainly of gas‐rich inclusions with subordinate polyphase inclusions that do not homogenize below 500d?C. Fluid inclusions in veinlet quartz associated with galena and sphalerite (stage 4) are composed of liquid‐rich two‐phase inclusions, and they homogenize into liquid phase at temperatures ranging widely from 190d?C to 300d?C (suggesting boiling) and the salinity ranges from 1.0 wt% to 3.4 wt% NaCl equivalent. A pressure of about 15 bars is estimated for the dilute aqueous solution of 190d?C from which veinlet quartz associated with galena and sphalerite precipitated. In addition to a change in temperature‐pressure regime from lithostatic pressure during the deposition of iss and bnss with stockwork quartz veinlets to hydrostatic pressure during fracture‐controlled quartz veinlet associated with galena and sphalerite, a decrease in pressure is supposed to have occurred due to unroofing or removal of the overlying piles during the temperature decrease in the evolution of hydrothermal system. The majority of the sulfur isotopic composition of sulfides ranges from ±0 % to +5 %. Sulfur originated from an iso‐topically uniform and homogeneous source, and the mineralization occurred in a single hydrothermal system.     

豫西前河构造蚀变岩型金矿成矿过程中的流体-岩石反应

前河金矿区位于华北地台南缘,赋存在中元古界熊耳群安山岩和英安岩中,矿体受断裂破碎带控制。含矿热液在迁移过程中与围岩发生了广泛的流体-岩石反应而引起热液蚀变。本区石英中有4种类型的流体包裹体,均一温度范围为145～331℃,其中含CO2包裹体的完全均一温度主要分布在中-高温区。成矿流体的密度和压力变化范围分别是0.68～0.94g/cm3和(367.01～896.55)×105Pa。金大量沉淀成矿时的流体特征为:温度213～260℃、密度0.80～0.89g/cm3和压力(502.86～710.57)×105Pa。流体相为SO42->Na >Cl->K 型,CO2/H2O比值及N2、H2S、Ar、C2H6等挥发分的含量明显增高,f(CO2)、f(H2S)、f(CH4)和Eh值增大;f(O2)、f(H2O)和pH值减小。在青磐岩化安山岩的基础上发生的流体-岩石反应是造成本矿床金沉淀成矿的最主要原因。     

湖北徐家山锑矿床流体包裹体特征及其意义

文章利用激光拉曼光谱和显微测温学方法,对湖北徐家山锑矿床成矿期的石英、重晶石和方解石中的流体包裹体进行了研究。研究表明,这些矿物中的流体包裹体主要有纯液体包裹体和液体包裹体(气相 液相)2类,其液体包裹体的气相成分为H2O±CO2±N2;石英、重晶石和方解石的均一温度分别为134~258℃、154~259℃和145~230℃,主要集中于150~200℃;流体的盐度w(NaCleq)和密度分别集中于3%~6%和0.90~0.96g/cm3。流体包裹体资料揭示出该矿床为典型的中低温热液锑矿床,其成矿流体为中低温、低盐度、中等密度热液。结合H、O、Sr、Pb同位素等研究结果,进一步推断该成矿热液主要是经深部循环演化的大气降水。     

云南个旧卡房铜多金属矿床流体包裹体特征及其地质意义

卡房铜多金属矿床位于云南省个旧锡多金属矿集区, 作为该区南段典型的铜多金属矿床, 其深入的成矿流体性质及成矿物质来源研究尚为薄弱, 限制了对该矿床成因的深入认识。本文对产于玄武岩中的似层状铜多金属矿体(主要成矿类型)开展了精细的野外岩相学、矿物学、C-H-O同位素及流体包裹体原位成分分析。结果显示, 流体包裹体主要为气液两相水溶液包裹体, 石英流体包裹体均一温度为 264.5~330.5 ℃、盐度w(NaCleq)为16.24%~18.20%、密度为0.853~0.924 g/cm3; 萤石流体包裹体均一温度为199.8~339.1 ℃、盐度w(NaCleq)为8.81%~18.88%、密度为0.822~0.955 g/cm3; 方解石流体包裹体均一温度为112.1~199.4 ℃、盐度w(NaCleq)为4.96%~10.86%、密度为0.910~1.011 g/cm3, 表明卡房铜多金属矿床成矿流体具有中低温、中低盐度、低密度特征, 且早阶段到晚阶段, 成矿温度和流体盐度明显降低。与Cu矿共生的石英δDV-SMOW值为–83.9‰ ~ –78.9‰, δ18OH2O值为4.63‰~12.14‰, 方解石δ13CV-PDB值为–7.11‰~ 0.64‰; 同时, 石英单个流体包裹体原位分析结果显示流体包裹体富集大离子亲石元素, 如Na、K、Rb、Cs、Sr等。这些特征暗示了流体可能来源于与花岗质岩浆有关的热液流体, 热液流体上升过程中与围岩碳酸盐岩发生强烈的水-岩反应; 该过程可能萃取了玄武岩层中的Cu物质, 诱发了Cu的富集并最终成矿。