循环载荷对压实雪冰抗压强度的影响研究

世界强国针对南极科技前沿、地缘政治、开发利用权益的争夺日趋激烈。中国建设和运营南极航空基础设施,有利于提升中国在南极的综合影响力、扩大南极科学考察规模、满足人员和物资快速投送需求,因此,南极机场建设的战略发展价值突出,而压实雪层跑道是中国在南极建设大型机场路面的首选形式。采用压实雪的方法制备人工冰样,结合冰雪跑道所承受的飞机载荷特征,在（-10.0±0.3） ℃温度条件下,以1.0 MPa为平均加载应力,以0.03 Hz为加载频率,应力幅值为0.2~1.0 MPa,循环次数100~900为循环条件,开展在1.0×10^-3~1.0×10^-1 s^-1应变速率下循环载荷压实雪冰的抗压强度试验,以及5.0×10^-4~1.0×10^-1 s^-1应变速率下单调载荷压实雪冰的抗压强度试验。结果表明：单调载荷下的压实雪冰抗压强度在韧性区内随着应变速率的增加而增加,在韧性-脆性过渡区达到最大值,然后在脆性区中显著减少;在高应变速率和一定循环次数范围内,循环载荷对压实雪冰的抗压强度具有强化作用;当超过一定循环次数时,循环载荷对压实雪冰的抗压强度会产生弱化作用。以上试验结果可为压实雪层跑道的设计和维护提供理论依据。     

双向循环荷载作用下砾石−格栅界面动力剪切特性

在动荷载作用下,加筋土结构中筋土界面不仅会受到水平循环剪切作用,还会受到循环荷载的压缩作用。采用大型直剪仪对双向循环作用筋土界面动力剪切特性进行研究,探究不同循环法向荷载频率、水平循环剪切频率和法向荷载波形对界面剪切强度的影响。结果表明：当循环法向荷载频率和水平循环剪切频率一致时,峰值剪切应力和最大竖向位移随着频率的增加而增加,前后半周期剪切应力和位移曲线时间差均相同;反之,滞回圈应力−位移关系和竖向位移会由于双向循环荷载频率的不同呈现两种不同形态特性;正弦波法向荷载作用下剪切应力和竖向位移最大,而斜波和方波荷载作用下,滞回圈和竖向位移变化曲线较三角波和正弦波差别较明显;剪切刚度随着双向循环荷载频率的增大而增大,正弦波作用下界面剪切刚度最大,斜波作用下界面剪切刚度最小。     

考虑循环变温的软土热固结模型

在能源岩土工程发展需求背景下,土体工程特性的温度效应研究受到了国内外学者的广泛关注。针对现有关于循环变温热固结理论研究的不足,提出考虑循环变温条件下土体先期固结压力随温度循环次数变化的关系式,计算多次循环变温后软土的固结压缩量。在此基础上,推导考虑循环变温的太沙基固结修正公式,分析整个循环变温过程中孔压和固结沉降的变化规律。最后通过与单元体测试结果进行对比,验证该计算模型的可靠性。研究结果表明,在循环变温和瞬时荷载的耦合作用下,土体的沉降变形和孔压随温度循环次数的变化而变化,且影响程度与循环次数相关;新型热固结模型为涉及循环变温的岩土工程问题分析提供了一定的理论支撑。     

循环载荷下含水砂岩裂纹演化与损伤特征试验研究

基于矿井地下水库岩体频繁受到矿震、采动应力等循环荷载扰动这一工程背景,在实验室条件下开展了不同含水率砂岩单轴及循环加卸载试验,采用数字散斑技术,揭示了不同含水率砂岩裂纹扩展及破坏规律,基于电镜扫描微观分析,获得了循环载荷下不同含水砂岩微观劣化机制。试验结果表明：单轴及循环加卸载条件下,随着含水率增大,砂岩峰值强度均逐渐降低。干燥砂岩峰值轴向应变经历初始变形、等速变形、加速变形和失稳破坏4个阶段,含水砂岩经历初始变形、等速变形和失稳破坏3个阶段;随着含水率的增大,对应阶段内峰值轴向应变逐渐减小。通过变形率分析法验证发现,水对砂岩的变形记忆特性并无影响。单轴循环加卸载条件下,砂岩的破坏模式由干燥时的张拉−劈裂破坏逐渐向拉−剪混合破坏过渡,至饱和状态时呈现单一的剪切破坏。电镜扫描结果表明,随含水率增大,破裂结构面逐渐由光滑结构、浑圆状结构、片状结构向完全破碎结构过渡。随着含水率增大,绝对损伤参数不断增大,从侧面反映水岩耦合损伤的正相关性;累计损伤参数累积速率更快,同一循环周次下,累计损伤参数也更大。     

峰前循环剪切作用下岩石节理剪切力学特性

微震、工程爆破等低应力循环剪切荷载作用对节理岩体工程失稳破坏具有重要影响。为研究峰前循环剪切加卸载作用下岩石节理剪切力学特性,采用RDS-200型岩石节理剪切试验系统对人工劈裂黄砂岩节理进行了峰前循环剪切下的直剪试验。通过与未进行峰前循环剪切加卸载时岩石节理力学参数预测值对比,得到峰前循环剪切加卸载作用对峰前剪切刚度、峰值剪切强度、峰值剪切位移与残余剪切强度的影响。结果表明：（1）峰前循环剪切加卸载后,当法向应力为2 MPa时,岩石节理峰前剪切刚度增大,当法向应力为4～10 MPa时,岩石节理峰前剪切刚度在循环剪切应力幅值范围内增大,在超出循环剪切应力幅值时减小;（2）峰前循环剪切加卸载后,峰值剪切强度降低了10%～20%,降低百分比随法向应力增大整体呈对数函数增大;峰值剪切位移增加了2%～40%,增加百分比随法向应力增大整体呈对数函数减小;（3）峰前循环剪切加卸载后,岩石节理残余剪切强度无明显变化,峰值剪切强度与残余剪切强度差值减小,峰后剪切应力做功损失百分比降低。     

Multisphere Tectonics of the Earth System

The fundamental theoretical framework of the Multisphere Tectonics of the Earth System is as follows: (1) It intends to extend the geotectonic studies from the crustal and lithospheric tectonics to the multisphere tectonics of the Earth system as a whole. (2) The global dynamics driven by both the Earth system and the cosmic celestial system: solar energy, multispheric interactions of the Earth system and the combined effects of the motions of celestial bodies in the cosmos system are the driving forces of various geological processes. (3) The Continent-Ocean transformation theory: the continent and ocean are two opposite yet unified geological units, which can be transformed into each other; neither continent nor ocean will survive forever; there is no one-way development of continental accretion or ocean extinction; the simple theory of one-way continental accretion is regarded as invalid. (4) The continental crust and mantle are characterized by multiple layers, with different layers liable to slide along the interfaces between them, but corroboration is needed that continents move as a whole or even drift freely. (5) The cyclic evolution theory: the development of Earth’s tectonics is not a uniform change, but a spiral forward evolution, characterized by a combination of non-uniform, non-linear, gradual and catastrophic changes; different evolutionary stages (tectonic cycles) of Earth have distinctive global tectonic patterns and characteristics, one tectonic model should not be applied to different tectonic cycles or evolutionary stages. (6) The structure and evolution of Earth are asymmetric and heterogeneous, thus one tectonic model cannot be applied to different areas of the world. (7) The polycyclic evolution of the continental crust: the continental crust is formed by polycyclic tectonics and magmatism, rather than simply lateral or vertical accretion. (8) The role of deep faults: the deep fault zones cutting through different layers of the crust and mantle usually play important roles in tectonic evolution. For example, the present-day mid-ocean ridge fault zones, transform fault zones and Benioff zones outline the global tectonic framework. Different tectonic cycles and stages of Earth’s evolution must have their own distinctive deep fault systems which control the global tectonic framework and evolutionary processes during different tectonic cycles and stages. Starting from the two mantle superplumes Jason (Pacific) and Tuzo (Africa), the study of the evolutionary process of the composition and structure of the crust and mantle during the great transformation and reorganization of the Meso-Cenozoic tectonic framework in China and the other regions of Asia is a good demonstration of theory of Multisphere Tectonics of the Earth System.     

考虑场地动应力条件的饱和海洋粉细砂液化特性

确保地震荷载作用下海床场地的动力稳定性是海洋工程全寿命周期安全运行的重要保证,然而对复杂海域环境下饱和粉细砂的液化特性研究尚属少见。基于海域场地动应力计算方法,确定各试验工况的场地循环应力比CSR,并对试样施加与之对应的不排水循环荷载。试验结果表明：可液化的海洋粉细砂在考虑其场地动应力条件的循环荷载作用下出现不同的液化可能性;粉细砂呈循环破坏模式,将双幅轴向应变>5%作为循环破坏标准;海洋粉细砂的液化可能性与土体的埋深及动应力均不呈单一相关性,而是随着干密度的增大,液化振次逐渐增大,当干密度＞1.72 g/cm3时土体不再液化。该结果可为杭州湾区抗震区划及海洋工程结构抗震设计提供参考。     

关中盆地地下水无机指标数据集(2015年度)

本数据集包含了2015年在关中盆地采集的200个地下水样品的位置信息、取样层位信息及33项无机地球化学成分测试结果信息。水质综合评价的结果按照地下水质量级别划分,除去10个空白水样,样品中Ⅱ类水2件,Ⅲ类水57件,Ⅳ类水56件,Ⅴ类水75件;按照地下水水质类型划分,淡水111件,半咸水71件,咸水8件。采样过程规范,测试结果均由具备国家认可资质的实验室测试完成,数据质量可靠。关中盆地从盆地边缘至盆地中心,地下水化学类型由HCO₃-Ca型经HCO₃-Ca·Mg·Na型转变为SO₄·Cl-Na型,呈明显的水平分带性规律。水质评价的结果表明,该时段关中盆地地下水质量状况较差,有68.9%的地下水不适于直接饮用。其中Ⅱ-Ⅲ类水主要分布在关中盆地的南部、西部和北部的局部地区;Ⅳ类水主要分布在渭河边、高陵县、泾阳县和乾县;Ⅴ类水主要分布在大荔县、蒲城县、富平县、阎良区、咸阳市区周边、三原县和礼泉县。本数据集可为研究关中盆地地下水循环演化等提供地球化学指标参考。     

A general method for defining the number of cycles of repeated loading

In geotechnical engineering designs and safety checks, the number of cycles of repeated loading N is frequently used as a parameter for calculating the response of soil structures under the repeated loading. However, there appears to be a lack of rational methods for calculating N for repeated loadings along general stress paths. A new method for defining N is proposed in this paper, based on the assumption that a yield surface may be identified for the material. It is demonstrated that the proposed method provides a rational and useful means for engineering calculation of soil deformations under repeated loadings. Copyright © 2001 John Wiley & Sons, Ltd.     

Experimental evaluation on seismic performance of sandwich box columns

This paper presents experimental information on the behaviour of sandwich box columns subjected to combined bending and axial loading. The sandwich box columns consisted of double thin-walled steel tubes with concrete between them. Owing to the interaction between steel and concrete, the composite members performed in a ductile manner during testing. Test results show that high strength/mass ratio characteristics were maintained, and the goal of obtaining significant member ductility was also achieved. The contribution of concrete to member performance was found to be more significant for members with higher steel width/thickness ratios. Copyright © 1999 John Wiley & Sons, Ltd.