基于面片裁切技术的点云轮廓线生成算法

随着点云在各个领域的广泛应用,对点云处理相关技术的研究更为活跃。目前,研究的热点主要集中在点云去噪、配准、分割、增强、特征提取和重建等方面。其中,特征提取起着承前启后的作用,具有十分重要的研究价值。基于面片裁切技术的点云轮廓线生成算法。首先,对点云数据进行面片提取,通过面片生长、融合生成特征面片,并根据提出的面片双向索引法快速构造特征线,最终实现点云平面轮廓线的生成。实验证明,本算法可快速、准确、有效地实现点云轮廓线的生成。     

中国南海北部珠江口-琼东南盆地钻井岩屑地球化学特征及深水区天然气聚集特征

The Qiongdongnan Basin and Zhujiang River(Pearl River) Mouth Basin, important petroliferous basins in the northern South China Sea, contain abundant oil and gas resource. In this study, on basis of discussing impact of oil-base mud on TOC content and Rock-Eval parameters of cutting shale samples, the authors did comprehensive analysis of source rock quality, thermal evolution and control effect of source rock in gas accumulation of the Qiongdongnan and the Zhujiang River Mouth Basins. The contrast analysis of TOC contents and Rock-Eval parameters before and after extraction for cutting shale samples indicates that except for a weaker impact on Rock-Eval parameter S_2, oil-base mud has certain impact on Rock-Eval S_1, Tmax and TOC contents. When concerning oil-base mud influence on source rock geochemistry parameters, the shales in the Yacheng/Enping,Lingshui/Zhuhai and Sanya/Zhuhai Formations have mainly Type Ⅱ and Ⅲ organic matter with better gas potential and oil potential. The thermal evolution analysis suggests that the depth interval of the oil window is between 3 000 m and 5 000 m. Source rocks in the deepwater area have generated abundant gas mainly due to the late stage of the oil window and the high-supper mature stage. Gas reservoir formation condition analysis made clear that the source rock is the primary factor and fault is a necessary condition for gas accumulation. Spatial coupling of source, fault and reservoir is essential for gas accumulation and the inside of hydrocarbon-generating sag is future potential gas exploration area.     

Estimating the crush zone size under a cutting tool in coal

Summary As part of an effort to understand the mechanics of fine fragment formation in coal, which is important in studies of respirable dust due to mining, fracture toughness measurements and the strain energy density (SED) theory were applied to calculate the crush zone size under a cutting tool in coal. This zone is the major source of fine fragments in the 1 to 10 µm size range. The model used in these calculations is a boundary element program containing a failure criterion based on the SED theory. The boundary element program calculates linear elastic stresses at numerous points in the coal material ahead of a cutting bit. These stresses are then input to a subroutine called critical flaw length and orientation (CFLO) which uses the SED theory to determine the CFLO for a small crack at the boundary element stress computation point. The extent of crushing is based on earlier postulates about the role of inherent flaws in a fragmentation process. To form 1 to 10 µm fragments requires firstly a local stress strong enough to activate flaws with a characteristic length less than 1 to 10 µm and secondly, a flaw density sufficient to provide an average spacing between flaws also on the order of 1 to 10 µm. The locus of active 10 µm flaws represents the maximum possible extent of fine fragmentation in the 10 µm or less size range assuming that a sufficient inherent flaw density exists. The approach offers a first order approximation to the extent of crushing under a tool tip. The size and shape of the crush zone volume is affected by the attack angle and geometry of the tool.     

A simple criterion for the machinability of hard rocks

Conclusions The application of mechanical methods for rapid excavation requires more detailed and precise knowledge of the site, but there is no single parameter which can provide a comprehensive measure for the selection and performance of a tunnel boring machine.The machinability index proposed in this paper is based on four different parameters which influence the performance of a tunnelling machine and are widely accepted by the engineers and geologists. In order to develop a comprehensive measure regarding the borability of rocks,in situ conditions must be evaluated. The machinability index coupled with thein situ information would facilitate judicious decisions regarding the application and selection of tunnel boring machines.The geological conditions and rock characteristics cannot be controlled but their knowledge can prevent costly mistakes in equipment selection and assist in identifying alternative excavation systems, therefore a thorough site investigation can substantially reduce the economic and technical risks associated with tunnelling and mine development.     

冻土切削力学特性的试验和理论分析

利用笔者所研制的冻土切削试验台，在室内对不同冻土在不同温度、含水量、切削速度、切削深度和切刀前角下进行了一系列切削试验。结果表明，切削时，冻土主要呈脆性断裂破坏，其切削过程被认为是刀刃切入和撕裂冻土的结果，切削阻力随冻土温度降低而非线性增加，随切削速度提高而略有增加，随切削深度增加而近似线性增加，最佳切刀前角随切削深度增大有增大趋势。但平均切削阻力与最大切削阻力之比值对不同试验条件基本在０．４－０．６５间变化。同时，根据切削过程机理，从理论上建立了最大切削力模型，此模型考虑了切入和撕裂冻土阻力。     

地台活化与层控铅锌矿床

本文主要介绍大多数层控铅锌矿床是产在半封闭沉积盆地碳酸盐岩中,属同生沉积成因。在地台活化时期,由于扬子地台西南缘从稳定地块转向活化。在构造-岩浆作用时期,火山喷气导致了金属聚积。因此,所有的矿床均表现出受超壳大断裂控制,这些矿床可认为是同生沉积-火山喷气成因。     

Waterjet-assisted rock cutting systems — the present state of the art

Summary A review of the benefits of assisting mechanical tools, notably drag bits, with moderate pressure waterjets suitably directed with respect to the bit is given. These benefits include reduced bit forces, especially the bit normal force, reduced bit wear, reduced dust make, and reduced incidence of frictional sparking. The research work that has been conducted to date to investigate this phenomenon has been empirical in nature. Experiments are described that extend the data bank of this empirical knowledge. In addition, experiments aimed at gaining a better understanding of the fundamentals of the rock fragmentation process with this hybrid cutting method are outlined.Results from the first of these experimental series are used to make recommendations as to the position of the jet with respect to the bit, the stand-off distance between the nozzle exit and the bit/rock interface, and the jet energy. In addition, preliminary findings are reported regarding the increase necessary in the jet energy when the bit velocity is increased. Results from the second test series are discussed in the context of rock fracture behaviour induced by mechanical bits acting alone. The likely influence of waterjets on these fracture processes is analysed. It is concluded that, in terms of the bit force reductions, a dominant influence of the jets when used in conjunction with sharp drag bits, is continuous removal of the rock debris that forms ahead of the advancing bit. The observed reductions in bit wear and incidence of frictional sparking are attributed to reduced heat loading of the bit during the cutting operation. Reductions in the dust make are attributed to effective wetting of the fine rock particles before they become entrained in the airstream.     

滚刀钻头在桩基施工中的应用

焊齿破岩滚刀钻头适应多种地层钻进。本文主要介绍了焊齿破岩滚刀钻头的钻进工作原理，在桩基施工中的钻进技术参数，滚刀刀齿的修复及应用效果。     

某倾倒边坡开挖下的变形特征及加固措施分析

以皖南某高速公路一个反倾边坡为例,在详细地质调查基础上分析了边坡以倾倒-滑移为主要特征的倾倒变形力学机理。调查结果显示在边坡原有倾倒变形的基础上,开挖爆破等工程扰动首先使开挖面顶部出现倾倒变形并伴有后缘拉裂隙,同时坡体内部断续结构面逐渐贯通,最下级台阶面出现外鼓等。上述现象的出现显示出边坡具有整体失稳破坏的趋势。在上述地质概念模型基础上,应用离散单元法对边坡变形全过程进行模拟,验证上述变形破坏机理,并揭示了边坡在深度方向上的变形分区现象,即倾倒-折断区、强烈倾倒区、倾倒影响区和正常岩层区。