对河南省栾川县大练沟泥石流治理的经验总结

随着国民经济迅速发展,对矿产资源的需求日益增多,20世纪七、八十年代的开采只追求产量和经济效益,而忽视了对环境的保护,开采的矿渣乱排乱放现象非常严重,严重破坏了环境,象这样的矿山在全国各地有很多,随着时间的发展,松散堆积的矿渣在洪水的作用下顺着沟道倾泻而下,形成泥石流,对下游的人民生命财产造成严重的破坏和威胁,矿山泥石流逐步发展,进入发展期和活跃期,必将造成更大的危害。因此对这样的泥石流沟进行研究和治理是很有必要的。在对河南省栾川县大练沟泥石流的治理过程中,得出以下几点体会,现总结归纳出来,希望对类似泥石流沟的治理提供借鉴。     

Evaluation of change in subsurface thermal environment due to groundwater flow in the Tokyo Lowland,Japan

Information on the distribution of subsurface temperature and hydraulic heads at 24 observation wells in and around the Tokyo Lowland, the eastern part of the Tokyo Metropolitan area, were examined to make clear the relationship between groundwater and the subsurface thermal environment in the urban area. Minimums in temperature–depth logs due to subsurface temperature increasing at shallow parts were recognized in 21 wells. This fact shows subsurface temperature is affected by ground surface warming in almost all of this area. Deeper than minimums, where the effects of surface warming became relatively small, regional variation is observed as follows: high temperatures are shown in the central part to the southern part, and low temperatures shown in the inland to eastern part. The high temperature area corresponds to an area where the lower boundary of groundwater flow is relatively shallow. This area corresponds also to an area with severe land subsidence resulting from excessive groundwater pumping. It is considered that this high temperature area is formed by the effects of upward groundwater flow affected by hydrogeological conditions and pumping. On the other hand, a comparison between past data (1956–1967) and present data (2001–2003) revealed widespread decreasing temperature in the inland area. This is explained by downward groundwater flow based on an analysis of temperature–depth logs. This fact suggests that subsurface temperature is not only increasing from the effects of surface warming but also decreasing from the effects of groundwater environment change due to pumping.     

硅质碎屑砂岩中胶结物来源的新认识

分析了浅埋藏砂岩的成岩环境,并从岩石学、矿物学、同位素及质量平衡估算方面论证硅质碎屑砂岩中的胶结物主要来源于砂岩浅埋藏期间的地下水,进而分析浅埋藏带内地下水的流动机制及早期胶结作用对晚期成岩作用的影响。     

用于砾石夹层钻进的新型PDC钻头的研制与使用

无压浸渍工艺生产的PDC石油钻头钻遇砾石夹层不适应。根据砾石夹层砾石坚硬、软硬互层、非均质、研磨性强的特点，研究了新型PDC钻头，在钻头结构上主要采取外抛内锥带辅助切削齿的结构形式，在复合片上主要采用非平面结合方式，即采用双向多条直槽非平面结合。按此方案设计与生产了3只钻头，分别在3口井试用，直接钻穿砾石夹层馆陶组地层井段，钻井效率提高26%，突破了砾石夹层钻进不能使用PDC钻头的禁区。     

Re-evaluation of focal depths and source mechanisms of selected earthquakes in the Afar depression

We present a stepwise inversion procedure to assess the focal depth and model earthquake source complexity of seven moderate-sized earthquakes  (6.2 > M _w > 5.1)  that occurred in the Afar depression and the surrounding region. The Afar depression is a region of highly extended and intruded lithosphere, and zones of incipient seafloor spreading. A time-domain inversion of full moment tensor was performed to model direct P and SH waves of teleseismic data. Waveform inversion of the selected events estimated focal depths in the range of 17–22 km, deeper than previously published results. This suggests that the brittle–ductile transition zone beneath parts of the Afar depression extends more than 22 km. The effect of near-source velocity structure on the moment tensor elements was also investigated and was found to respond little to the models considered. Synthetic tests indicate that the size of the estimated, non-physical, non-isotropic source component is rather sensitive to incorrect depth estimation. The dominant double couple part of the moment tensor solutions for most of the events indicates that their occurrence is mainly due to shearing. Parameters associated with source directivity (rupture velocity and azimuth) were also investigated. Re-evaluation of the analysed events shows predominantly normal faulting consistent with the relative plate motions in the region.     

云南元-磨公路某高堑坡灾害发生机制及防治对策

论文根据现场地质调查,应用地质力学分析方法,分析了元-磨公路K235 160~600段高堑坡地质条件、病害发生机制和诱发因素。堑坡所在区域位于红河深大断裂与哀牢山深大断裂所夹持的哀牢山褶皱带内,属强烈侵蚀切割的低中山区,河流下切严重,河流阶地不发育。南溪河及其支流小曼萨河、叉河依附于不同时期生成的构造发育而成,堑坡位于小曼萨河注入南溪河的交汇部位小曼萨河的左岸。小曼萨河及南溪河所夹持的山体,尤其是堑坡所在的部位,已严重破碎、松弛,岩石似大块石堆垒状,坡面上的树木均明显地向小曼萨河方向倾倒。经地质力学配套分析,堑坡所依附的山梁形成于红河深大断裂生成期(γ4),堑坡岩体受多期构造活动的作用,其中NW65/°SW64°及NW63/°SW35°两组倾向临空的构造面控制坡体的稳定。堑坡具备发生变形破坏的地质条件,分析认为由于组成坡体的岩土强度不足而引起既有构造面的大型坍塌。连续降雨及温差是诱发因素。基于目前国内边坡防治技术、施工能力,提出了以“治”或“避”为主的防治对策。     

Monitoring of Over Cutting Area and Lubrication Distribution in a Large Slurry Pipe Jacking Operation

Slurry pipe jacking was firmly established as a special method for the non-disruptive construction of the underground pipelines of sewage systems. Pipe jacking, in its traditional form, has occasionally been used for short railways, roads, rivers, and other projects. Basically the system involves the pushing or thrusting of concrete pipes into the ground by a number of jacks. In slurry pipe jacking, during the pushing process, mud slurry and lubricant are injected into the face and the over cutting area that is between the concrete pipes and the surrounding soil. Next, the slurry fills voids and the soil stabilizes due to the created slurry cake around the pipes. Fillings also reduce the jacking force or thrust during operation. When the drivage and pushing processes are finished, a mortar injection into the over cutting area is carried out in order to maintain permanent stability of the surrounding soil and the over cutting area. Successful lubrication around the pipes is extremely important in a large diameter slurry pipe jacking operation. Control of lubrication and gaps between pipes and soil can prevent hazards such as surface settlement and increases in thrust. Also, to find voids around the pipes after the jacking process, in order to inject mortar for permanent stabilizing, an investigation around the pipes is necessary. To meet these aims, this paper is concerned with the utilization of known methods such as the GPR (Ground Penetrating Radar) system and borehole camera to maintain control of the over cutting area and lubricant distribution around the pipes during a site investigation. From this point of view, experiments were carried out during a tunnel construction using one of the largest cases of slurry pipe jacking in Fujisawa city, Japan. The advantages and disadvantages of each system were clarified during the tests.     

深层地震勘探激发井深探讨

深层地震勘探野外资料采集的关键是在保证原始资料一定信噪比的基础上,同时兼顾分辨率,激发井深是决定资料品质的重要因素之一。通过对虚反射滤波作用分析,提出了充分利用虚反射能量设计最佳激发井深,增强下传地震波能量的采集方法。理论分析和试验资料表明,在高速层下4～7m的最佳激发岩性深度是深层勘探的理想井深。     

三工河流域222团竖井排灌区潜水动态分析

222团地处三工河流域冲洪积细土平原下游,40多年来的农业生产灌溉,使灌区大部分地区处于潜水临界埋深以上,土壤次生盐渍化加剧.分析了灌区潜水埋深动态特征及其影响因素,就竖井排灌区地下水开采量与潜水埋深关系进行回归分析计算,建立了开采量预测模型.     

复式河槽正常水深计算方法比较

明渠恒定均匀流正常水深在水力计算中十分重要。而对于复式河槽,当洪水漫滩后,直接运用曼宁方程推求正常水深,将带来很大误差。系统地总结了计算正常水深的各种方法,用二分法求解,并运用英国科学工程研究协会洪水水槽设施(SERC-FCF)的大量系列水槽实验成果加以比较。比较发现,精度由高到低依次为COHM方法、刘沛清法、断面倾斜分割法、动量传递法、谢汉祥法、断面叠加法。通过对各种方法详细分析,建议在计算天然复式河槽正常水深时,COHM方法是值得推广的一种好方法。