Revised runoff curve number for runoff prediction in the Loess Plateau of China

The soil conservation service (now Natural Resources Conservation Service) Curve Number (SCS-CN), one of the most commonly used methods for surface runoff prediction. The runoff calculated by this method was very sensitive to CN values. In this study, CN values were calculated by both arithmetic mean (CN_C) and least square fit method (CN_F) using observed rainfall-runoff data from 43 sites in the Loess Plateau region, which are considerably different from the CN₂ values obtained from the USDA-SCS handbook table (CN_T). The results showed that using CN_C instead of CN_T for each watershed produce little improvement, while replacing CN_T with CN_F improves the performance of the original SCS-CN method, but still performs poorly in most study sites. This is mainly due to the SCS-CN method using a constant CN value and discounting of the temporal variation in rainfall-runoff process. Therefore, three factors—soil moisture, rainfall depth and intensity—affecting the surface runoff variability are considered to reflect the variation of CN in each watershed, and a new CN value was developed. The reliability of the proposed method was tested with data from 38 watersheds, and then applied to the remaining five typical watersheds using the optimized parameters. The results indicated that the proposed method, which boosted the model efficiencies to 81.83% and 74.23% during calibration and validation cases, respectively, performed better than the original SCS-CN and the Shi and Wang (2020b) method, a modified SCS-CN method based on tabulated CN value. Thus, the proposed method incorporating the influence of the temporal variability of soil moisture, rainfall depth, and intensity factors suggests an accurate runoff prediction for general applications under different hydrological and climatic conditions on the Loess Plateau region.     

Predicting the dependency of a degree of saturation on void ratio and suction using effective stress principle for unsaturated soils

The paper presents an approach to predicting variation of a degree of saturation in unsaturated soils with void ratio and suction. The approach is based on the effective stress principle for unsaturated soils and several underlying assumptions. It focuses on the main drying and wetting processes and does not incorporate the effects of hydraulic hysteresis. It leads to the dependency of water retention curve (WRC) on void ratio, which does not require any material parameters apart from the parameters specifying WRC for the reference void ratio. Its validity is demonstrated by comparing predictions with the experimental data on four different soils taken over from the literature. Good correlation between the measured and predicted behaviour indirectly supports applicability of the effective stress principle for unsaturated soils. Copyright © 2009 John Wiley & Sons, Ltd.     

基于Logistic和Gompertz曲线模型拟合的建筑物沉降分析

重大工程建设一般会有定期的沉降和变形监测,本研究利用具有规律变化的Logistic和Gompertz曲线模型进行拟合,并以某大型发电厂为研究对象,利用近15年的监测数据,建立预测模型并进行精度评估。研究结果表明,若监测数据具有一定程度的稳定性,并对计算时监测数据进行合理取舍,对采取的全区、分区平均值或单一点高度值的检测数据,运用Logistic和Gompertz曲线模型来预测大型建筑物的沉降情况是可行的。     

影像全站仪在文物三维数字化测量中的应用与实践

根据影像全站仪的工作原理,总结出在文物测绘中的技术路线,研究点云数据处理过程中拼接、降噪、纹理映射的方法,并通过对模型数据采集精度的分析,给出了合理的数据模型采集值,为影像全站仪快速、可靠的在文物三维数字化建模中提供有益的借鉴。     

ZQZ TF型风传感器冻结故障自动检测装置设计

近年来我国大部分地区在冬、春两季多遭受冻雨灾害,自动气象站的风向风速传感器容易因冻结而无法正常工作。针对冻结故障的实时检测问题,本文设计了一种基于ZQZ-TF型风传感器的故障自动检测装置。该装置通过检测风传感器的工作电压和工作电流,实现对传感器实时状态的监控。同时,结合具体的故障诊断算法,能够快速判断风传感器是否被冻结。系统的核心硬件电路、软件算法可分别集成在自动气象站风向风速数据采集电路和嵌入式软件中,具有结构紧凑、操作简单的特点。经验证,该装置能够实时检测风传感器冻结故障,且工作稳定,检测精度高。     

采用弯曲进行道路化简冲突避免的方法

针对道路化简后可能导致要素间空间关系前后不一致的问题,提出了一种采用弯曲进行道路化简冲突避免的方法。首先,以弯曲为单元分析道路化简前后弯曲的形态变化规律,对化简过程产生的要素间空间冲突类型进行了归纳和总结;其次,基于道路弯曲与要素之间的空间关系,提出了相应的冲突判别规则;最后,利用弯曲化简的可控性和弯曲组的间接化简策略实现对化简冲突的避免。试验表明,该方法能有效地识别和避免道路化简产生的空间冲突,确保化简前后道路与其他要素空间关系的一致性。     

一种迭代法的圆曲线拟合方法

针对在实际测量工作中量测圆心坐标及半径时存在的问题,该文基于迭代法的思想,推导了一种圆曲线拟合的方法,并用实例数据进行了检验。结果显示,该方法在离散点均匀采集或非均匀采集的情况下均具有良好的拟合效果,与目前在圆曲线拟合方法中普遍采用的最小二乘法相比,具有同样高的拟合精度,验证了该拟合方法的正确性与可行性。     

长距离单历元单频非差北斗网络差分方法

针对北斗卫星导航系统现有的网络差分方法多是基于GPS系统并采用双差定位模型,而双差定位模型的采用使得网络差分方法存在一些缺陷的问题,该文提出一种长距离单历元单频非差北斗网络差分方法;首先长距离北斗基准站网向覆盖区域内的北斗用户提供非差误差改正数;然后用户内插计算出自己所需的非差误差改正数,并改正北斗单频伪距观测值的误差;最后进行单历元单频网络差分定位。实验表明,该方法能够使用单历元单频伪距观测数据实现长距离北斗网络差分定位。     

一种曲线拟合圆心坐标算法及精度分析

针对在工程应用中,经常需要根据某些圆形物体上的离散点求取其圆心坐标,而采用何种算法简单易行,其精度又与哪些因素有关的相关研究较少的问题,该文提出一种利用曲线拟合求取圆心坐标的简洁算法,并编程实现。然后采用模拟仿真结合统计分析的方法评估了该算法在不同条件下的拟合精度,得出测点误差越大,拟合精度越低;测点个数越多,分布越均匀,拟合精度越高;圆半径对拟合精度影响甚小等结论。在某工程项目中使用该算法得到的结果精度较高,验证了其有效可行,且与采用其他方法得到的坐标值较为接近,说明了该算法的可靠性高。     

变形监测技术在库岸防治工程中的应用

针对库岸稳定性检测的需求,该文将现代变形监测技术应用于乌江彭水县水电站鹿角镇库岸防治工程,对地表进行抗滑桩顶和岸坡表层水平位移和垂直位移监测,地下进行岸坡深层水平位移监测。文章对边坡变形监测进行分析,主要包括岸坡表层变形情况、岸坡深层位移情况、重要建筑物基础不均匀沉降情况及抗滑桩顶变形初步分析。对库安防治工程进行预警分析,可保证彭水县水电站的安全。