Classification of densities and characteristics of curve of population centers in China by GIS

In this paper, with the spatial analysis functions in ArcGIS and the county-level census data of 2000 in China, the population density map was divided and shown by classes, meanwhile, the map system of population distribution and a curve of population centers were formed; in accordance with the geographical proximity principle, the classes of population densities were reclassified and a population density map was obtained which had the spatial clustering characteristic. The multi-layer superposition based on the population density classification shows that the population densities become denser from the Northwest to the Southeast; the multi-layer clustering phenomenon of the Chinese population distribution is obvious, the populations have a water-based characteristic gathering towards the rivers and coastlines. The curve of population centers shows the population densities transit from the high density region to the low one on the whole, while in low-density areas there are relatively dense areas, and in high-density areas there are relatively sparse areas. The reclassification research on the population density map based on the curve of population centers shows that the Chinese population densities can be divided into 9 classes, hereby, the geographical distribution of Chinese population can be divided into 9 type regions: the concentration core zone, high concentration zone, moderate concentration zone, low concentration zone, general transitional zone, relatively sparse area, absolute sparse area, extreme sparse area, and basic no-man's land. More than 3/4 of the population of China is concentrated in less than 1/5 of the land area, and more than half of the land area is inhabited by less than 2% of the population, the result reveals a better space law of China’s population distribution.     

吉林夹皮沟金矿带黄铁矿热电性及热爆裂特征

通过对夹皮沟金矿带主要载金矿物黄铁矿的热电性和热爆裂特征分析,确定了主成矿世代及各世代矿化类型,预测了深部探矿的可能性。黄铁矿以电子型(N型)为主,极少有空穴型(P型),N型热电系数分布于-347.3～-6.2 μV·℃-1,P型热电系数介于17.4～193.5 μV·℃-1, 成矿温度集中于258.8～319.2 ℃, 剥蚀率为50.260%～50.485%。爆裂曲线反映中低温(＜280 ℃)矿化没有高温(＞290 ℃)矿化好。综合分析认为,夹皮沟金矿带矿化分早期高温世代(热电系数峰值为-120 μV·℃-1,成矿温度峰值为320 ℃)和晚期中低温世代(热电系数值峰值为-210 μV·℃-1,成矿温度峰值为270 ℃)。前者包括石英脉型与蚀变岩型,在矿体走向与夹皮沟主断裂一致及相交的矿区中均有发育;后者属石英脉型,主要在矿体走向与夹皮沟主断裂相交的矿区发育,叠加于高温世代热液矿化之上。高温热液矿化世代是主成矿世代,但有叠加的部位矿化增强。     

初论双三次数值模式

讨论在数学Rn空间里,存在孔斯双三次曲面拟合的可能数值模式(以下称双三次数值模式)。双三次数值模式特点是,在诊断上对天气系统中的由各个物理定律表述的(离散点)大气物理量场,可通过数学三次样条函数做双三次曲面拟合,则模式大气(包括天气系统)的各个物理量场均达到二阶可导,即是大气运动方程中的各个物理量场都存在各自的一、二阶空间微商,从而可以对模式大气与天气系统做时间积分。与有限差分模式和谱模式存在所谓的空间截断误差和波数截断误差相比较,双三次数值模式存在所谓的空间拟合误差,恰是现行有限差分模式空间截断误差的高阶小量。而双三次数值模式具有谱模式准确计算空间微商的优点,且双三次数值模式的数学构架能够较好地适应大气运动动力框架,是可与有限差分模式和谱模式相比较的另一数值分析新算法的气象数值模式。     

石英标准生长曲线在青藏高原东缘黄土光释光测年中的应用

石英标准生长曲线（SGC）法在黄土高分辨率光释光定年中有大幅节省测试时间的潜力,然而目前对该方法在不同时空尺度上的适用性尚存在争议。本文选取青藏高原东缘的典型黄土样品,通过系统地分析石英光释光生长曲线特征,检验SGC法和最小二乘法标准化生长曲线（LS-SGC）法在高原东缘黄土光释光定年中的适用性,结果显示：1）高原东缘黄土石英光释光信号以快组分为主,且同一地点不同样品、不同测片的生长曲线形态相似;2）当等效剂量（D_e）小于100 Gy时,不同地点样品石英生长曲线形态一致;大于100 Gy时生长曲线则具有不同的剂量响应特征;3）通过SGC法获得的D_e仅在0~100 Gy与实测值一致;LS-SGC法拟合的生长曲线结果更佳,并且LS-SGC法计算的D_e在100~200 Gy与实测D_e仍具有较好的一致性。研究结果有助于深入研究高原黄土光释光测年和风成沉积过程,同时也可为其他区域建立石英光释光标准生长曲线提供借鉴。

     

IP找水与DDJ-1型仪器野外数据采集

用DDJ-1型多功能激电仪对IP法二次场的长延续时段采集,可提高观测数据质量和判断数据采集的可靠性,因而观测到了反映第二层为相对高极化率的三层"K"型极化率曲线.     

Predicting the dependency of a degree of saturation on void ratio and suction using effective stress principle for unsaturated soils

The paper presents an approach to predicting variation of a degree of saturation in unsaturated soils with void ratio and suction. The approach is based on the effective stress principle for unsaturated soils and several underlying assumptions. It focuses on the main drying and wetting processes and does not incorporate the effects of hydraulic hysteresis. It leads to the dependency of water retention curve (WRC) on void ratio, which does not require any material parameters apart from the parameters specifying WRC for the reference void ratio. Its validity is demonstrated by comparing predictions with the experimental data on four different soils taken over from the literature. Good correlation between the measured and predicted behaviour indirectly supports applicability of the effective stress principle for unsaturated soils. Copyright © 2009 John Wiley & Sons, Ltd.     

基于Logistic和Gompertz曲线模型拟合的建筑物沉降分析

重大工程建设一般会有定期的沉降和变形监测,本研究利用具有规律变化的Logistic和Gompertz曲线模型进行拟合,并以某大型发电厂为研究对象,利用近15年的监测数据,建立预测模型并进行精度评估。研究结果表明,若监测数据具有一定程度的稳定性,并对计算时监测数据进行合理取舍,对采取的全区、分区平均值或单一点高度值的检测数据,运用Logistic和Gompertz曲线模型来预测大型建筑物的沉降情况是可行的。     

不同地形条件地面同步光谱定标场对比研究

利用美国ASD公司的FieldSpec Pro FR地面波谱仪,选择5°视场角探头和135cm探头距测试地物高度,开展0°、5°、10°、15°、20°等五种不同地形坡度明、暗地物自然定标场地面波谱测试。通过对比研究不同地形坡度具代表性、能真实反映被测试目标平均自然性的各波谱测试点波谱曲线特征,得出0°、5°地形坡度获取的波谱曲线连续、平滑,信噪比高,没有混入大气水气吸收、仪器噪声等因素导致的剧烈波动、跳跃现象或尖锐锯齿状噪声,波谱特征明显,吸收峰最小值位置清晰可辨,各波谱测试点波谱曲线变化幅度小,整体反射率值变化小,Fe~(2+)、Fe~(3+)、Al-OH、Mg-OH、CO_3~(2-)等分子基团与离子波谱的诊断性波谱特征位置清晰可辨。因此0°和5°坡度地形条件获取的地面同步自然场光谱定标波谱曲线,可以满足航空高光谱遥感数据的大气校正、光谱重建和空、地回归分析等所需的地面波谱数据要求。     

南图尔盖盆地Aryskum坳陷钾盐的测井响应特征及其分布

钾盐作为战略资源,在农业、工业等领域具有重要的使用价值。世界大多数固态钾资源发现于大规模的石油勘探过程中,充分利用各种油气地质、地球物理资料开展钾盐勘探对于国家发展尤为重要。位于哈萨克斯坦的南图尔盖盆地地质构造简单、资源勘探潜力较大。文中以南图尔盖盆地Aryskum坳陷为研究区块,基于其沉积地质特点,结合多口井的常规测井资料及前人研究成果,综合分析自然伽马、自然电位、三孔隙度等测井曲线的响应特征,含钾层段具体表现为自然伽马异常高值,并通过无铀伽马曲线等排除铀、钍元素影响,扩径使得中子值偏高,自然电位异常幅度由砂岩层的负异常变化为正异常,电阻率值偏高,密度值介于2.25~2.45 g/cm³,声波时差在270~350 μs/m范围内。基于含钾层测井曲线特点,利用测井曲线综合识别法、重叠法、交会图法进行研究区钾盐识别。在研究区30余口井中发现有可溶性钾盐层分布,分布在M-Ⅱ-3、M-Ⅱ-2小层底部,其中M-Ⅱ-3层底部为主要钾盐层段,并对各井含钾层段累计厚度进行统计分析。最后,借助地层对比分析含钾层段在横向和纵向上的展布情况,通过等厚图的绘制开展了找钾有利区分析,拓展了测井资料在南图尔盖盆地钾盐勘查中的应用,进而为今后研究区钾盐找矿提供重点方向。     

New instrument for measuring water discharge by the salt dilution method

The instantaneous salt dilution method for water discharge measurements in open channels has been improved by the development of a new instrument measuring conductivity. The salt method consists of two parts: the calibration and the actual measurement in the stream. The calibration aims to calculate the linear relationship between electrical conductivity and salt concentration at various degrees of dilution in a salt solution. The original undiluted solution is injected into the water of a stream and the conductivity is measured downstream from the injection site. When measuring, the new instrument integrates the conductivity over time. From the value obtained on the instrument's display, the water discharge can easily be calculated on a hand-PC in the field. The instrument has eliminated the subsequent calculation work formerly necessary. It has increased the accuracy of the method and also reduced the need for field personnel during measurements.