Response of a porous seabed around breakwater heads

The evaluation of wave-induced pore pressures and effective stresses in a porous seabed near a breakwater head is important for coastal engineers involved in the design of marine structures. Most previous studies have been limited to two-dimensional (2D) or three-dimensional (3D) cases in front of a breakwater. In this study, we focus on the problem near breakwater heads that consists of incident, reflected and diffracted waves. Both wave-induced oscillatory and residual liquefactions will be considered in our new models. The mistake in the previous work [Jeng, D.-S., 1996. Wave-induced liquefaction potential at the tip of a breakwater. Applied Ocean Research 18(5), 229–241] for oscillatory mechanism is corrected, while a new 3D boundary value problem describing residual mechanism is established. A parametric study is conducted to investigate the influences of several wave and soil parameters on wave-induced oscillatory and residual liquefactions around breakwater heads.     

The phase difference effects on 3-D structure of wave pressure acting on a composite breakwater

In designing the coastal structures, the accurate estimation of the wave forces on them is of great importance. In this paper, the influences of the phase difference on wave pressure acting on a composite breakwater installed in the three-dimensional (3-D) wave field are studied numerically. We extend the earlier model [Hur, D.S., Mizutani, N., 2003. Coastal Engineering 47, 329–345] to simulate 3-D wave fields by introducing 3-D Navier–Stokes solver with the Smagorinsky's sub-grid scale (SGS) model. For the validation of the model, the wave field around a 3-D asymmetrical structure installed on a submerged breakwater, in which the complex wave deformations generate, is simulated, and the numerical solutions are compared to the experimental data reported by Hur, Mizutani, Kim [2004. Coastal Engineering (51, 407–420)]. The model is then adopted to investigate 3-D characteristics of wave pressure and force on a caisson of composite breakwater, and the numerical solutions were discussed with respect to the phase difference between harbor and seaward sides induced by the transmitted wave through the rubble mound or the diffraction. The numerical results reveal that wave forces acting on the composite breakwater are significantly different at each cross-section under influence of wave diffraction that is important parameter on 3-D wave interaction with coastal structures.     

Buckling of multi-segment underwater pressure hull

Results of a numerical and experimental study into buckling performance of multi-segment pressure hull subjected to uniform hydrostatic pressure are discussed. Constituents of multi-segment configurations are bowed-out cylindrical shells with, and without flanges. Details about five collapse tests of laboratory scale mild steel, CNC machined models are given. Segments were about 200 mm diameter, 100 mm long and had uniform wall thickness of 3 mm. Experimental collapse pressures were in the range from 12 to 20 MPa. Numerical collapse pressures agreed well with those obtained during experiments.     

The effect of human use of sandy beaches on developmental stability of Talitrus saltator (Montagu, 1808) (Crustacea, Amphipoda). A study on fluctuating asymmetry

In recent years, there has been an increasing intensity of human use of coastal areas in Galicia (NW Spain). Actually, there is great concern about rapid and unplanned urban and industrial development on certain locations, as this can generate adverse impacts on those areas. In this study, we selected three sandy beaches along the Galician coast (Chanteiro, Insuela and Valieros) facing different levels of anthropic pressure, and we analysed Talitrus saltator individuals with the aim of elucidating whether anthropogenic pressures on beaches such as tourism or pollution have an influence on the incidence of morphological developmental alterations in sandhoppers in the field. Specifically, levels of fluctuating asymmetry were selected as indicators of environmental stress. Results of two sampling dates (May and September) show that individuals collected at the most touristy and polluted beach were those showing the highest asymmetry values, although results were only statistically significant for samples collected during spring. Results are in accordance with the hypothesis that beach management and pollution reduce symmetry in sandhoppers living in altered beaches.     

Environmental limitations on recruitment from seed in invasive Spartina densiflora on a southern European salt marsh

The South American cordgrass, Spartina densiflora, has invaded a range of different habitats that can support different native species assemblages on salt marshes in the Gulf of Cadiz, Spain. Little is known about the mechanisms of invasion. We examined the potential for seed germination and recruitment in a field transplant experiment, representing a wide range of environments, on elevational gradients across marshes with muddy and sandy sediments. The biotic resistance of native, perennial vegetation (where present) to recruitment of the alien was also investigated. Spartina densiflora seeds were able to germinate over a greater than 2-m range of elevation in the tidal frame. Germination success on unvegetated muddy sediments was related to sediment redox potential, with poor germination at strongly negative redox potentials on the lower sites. On sandy, well-drained sediments, germination was apparently constrained by water availability at the highest elevations. Comparison of vegetated and cleared plots on the upper marsh showed that there was a negative relationship between the presence of Atriplex portulacoides and germination on the muddy sediments. Recruitment (survival of seedlings for 12 weeks) was seen only on unvegetated muddy sediments at the highest elevation. Hence the invasive success and wide elevational tolerance of S. densiflora on the marshes of the Gulf of Cadiz are not reflected in its short-term ability to become established from its prolific seed production. Colonization of sub-optimal habitats may be largely by vegetative propagules and clonal growth.     

Numerical Simulation of Large Diameter Cylindrical Structure Slamming

The water entry of large diameter cylindrical structure is studied by applying numerical simulation method. The processes of different diameter cyhndrical structures impacting water with various constant velocities are calculated numerically. Thereafter, analyzed are the distribution of slamming pressure on structure during slamming course and the influence of slamming velocity and cylindrical diameter on slamming process. Furthermore, presented herein is an equation being used to forecast the peak slamming force on a large diameter cylindrical structure.     

pCO2 and carbon fluxes across sea-air interface in the Changjiang Estuary and Hangzhou Bay

Partial pressure of CO2(pCO2) was investigated in the Changjiang(Yangtze River) Estuary,Hangzhou Bay and their adjacent areas during a cruise in August 2004,China.The data show that pCO2 in surface waters of the studied area was higher than that in the atmosphere with only exception of a patch east of Zhoushan Archipelago.The pCO2 varied from 168 to 2 264 μatm,which fell in the low range compared with those of other estuaries in the world.The calculated sea-air CO2 fluxes decreased offshore and varied from -10.0 to 88.1 mmol m-2 d-1 in average of 24.4 ± 16.5 mmol m-2 d-1.Although the area studied was estimated only 2 × 104 km2,it emitted(5.9 ± 4.0) × 103 tons of carbon to the atmosphere every day.The estuaries and their plumes must be further studied for better understanding the role of coastal seas playing in the global oceanic carbon cycle.     

铣削斜楔形区域形成及其对流场负压区的影响规律

【目的】研究在内喷淋冷却高速铣孔加工中,铣削斜楔形区域的形成对流场负压区的影响。【方法】对高速湿式铣削加工区域建立三维流场模型,应用计算流体力学软件Fluent,采用非结构化四面体网格单元,利用滑移网格技术对高速铣削过程进行三维瞬态计算。【结果】得到不同刃数、不同转速的立铣刀对同一孔径工件进行切削时流场的压力分布情况。三刃立铣刀斜楔形对流场负压影响最大,当立铣刀刃数增加时,此斜楔形区缩小,负压减小,转速为10 000～20 000 r/min时增长速度逐渐降低,20 000～35 000 r/min时增长速度逐渐增高。【结论】从流场角度分析,流场中最大负压值与转速呈正相关,转速的提高增加了抑制空化的难度;增加铣刀刃数,可减小流场斜楔形区面积,减小空化可能。     

区域可持续发展能力的能值与(火用)耦合分析模型构建

可持续发展能力评价方法是识别人地协同规律、支撑科学决策的重要工具和热点需求。通过文献回顾与理论分析框架构建,耦合能值及?方法,提出自组织能力指数（SO）、生态压力指数（EP）、可持续发展能力指数（SC）构成的,基于热力学理论的可持续发展能力分析模型,利用文献荟萃法筛选17个典型发达国家1985年状态值计算SO与EP阈值,划分了4个阶段。利用中美两国1985-2015年特征对比验证,结果显示：① 2005年以前中国属“低自组织能力、低生态压力”阶段,之后进入“低自组织能力、高生态压力”阶段,存在低生态效率、规模扩张驱动特征;美国一直属“高自组织能力、高生态压力”阶段,存在高生态效率驱动、经济与生态脱钩特征,与全球生态足迹网络和世界自然基金会等的研究结果一致,模型具有较好适应性和可靠性。② 模型利用“获得?量/输入能值量”表达经济社会生态效率、“经济社会?损耗量/生态系统年产?量”表达生态压力,连接了经济社会对生态基底的熵化路径,可识别区域所处可持续发展阶段、分析水平变化和驱动因素。③ 模型以人类与生态并重的视角,从深度上反映经济社会的生态效率、从广度上评价生态空间被占用比例,具有宏观规模与微观效率分析相结合的优势,是对经典方法的补充。     

Experimental investigation of tsunami bore impact pressure on a perforated seawall

Catastrophic failures of many tsunami barriers along the affected coasts during the 2011 Tohoku earthquake tsunami has prompted extensive investigation into improving and revising design codes for tsunami defence structures. To date, researchers and coastal engineers are investigating to understand the failure mechanisms and to find solutions so that the structures merely remain intact in the extreme event such as tsunami. Thus, the present work is motivated to experimentally study tsunami-induced bore pressures exerted on vertical seawalls; a solid vertical wall and a porous vertical seawall that consisted of a perforated front wall and a solid rear wall. Bores with various heights and velocities were generated by using the dam-break method. A porous seawall with 20% porosity of perforated front wall was used in this study. Bore pressures exerted on the solid rear wall and chamber oscillations that occurred in the experiments were also discussed. The experimental results showed that multiple peak pressures were observed during bore run-up phase in the time series of bore impacts. A predictive equation to estimate the maximum bore pressure on a perforated seawall was developed using multiple regression analysis. The proposed equation was also compared with previous empirical formulas.