Aseismic negative dislocation model and deformation analysis of crustal horizontal movement during 1999——2001 in the northeast margin of Qinghai-Xizang block

Through numerical simulation for GPS data, aseism/c negative dislocation model for crustal horizontal movement during 1999-2001 in the northeast margin of Qinghai-Xizang block is presented, combined with the spatial distri-bution of apparent strain field in this area, the characteristics of motion and deformation of active blocks and their boundary faults, together with the place and intensity of strain accumulation are analyzed. It is shown that: a) 9 active blocks appeared totally clockwise motion from eastward by north to eastward by south. Obvious sinistral strike-slip and NE-NEE relative compressive motion between the blocks separated by Qilianshan-Haiyuan fault zone was discovered; b) 20 fault segments (most of them showed compression) locked the relative motion between blocks to varying degrees, among the total, the mid-east segment of Qilianshan fault (containing the place where it meets Riyueshan-Lajishan fault) and the place where it meets Haiyuan fault and Zhuanglanghe fault, more favored accumulation of strain. Moreover, the region where Riyueshan-Lajishan fault meets north boundary of Qaidam block may have strain accumulation to some degree, c) Obtained magnitude of block velocities and locking of their boundaries were less than relevant results for observation in the period of 1993-1999.     

Petrogenesis of the Ulsan carbonate rocks from the south-eastern Kyongsang Basin, South Korea

Abstract The petrogenesis of the Ulsan carbonate rocks in the Mesozoic Kyongsang Basin of South Korea, which have previously been interpreted as limestone of Paleozoic age, is reconsidered in the present study. Within the Kyongsang Basin, a small volume of carbonate rocks, containing a magnetite deposit and spatially associated ultramafic rocks, is surrounded by sedimentary, volcanic and granitic rocks of the Mesozoic age. The simple cross‐cutting relationships and other outcrop features of the area indicate that the carbonate rocks are an intrusive phase and younger than the other surrounding Mesozoic rocks. The Ulsan carbonates have low concentrations of rare earth elements (REE) and trace elements with the carbon and oxygen isotope values in the range of δ¹³C_PDB = 2.4 to 4.0‰ and δ¹⁸O_SMOW = 17.0 to 19.5‰. Outcrop evidence and geochemical signatures indicate that the Ulsan carbonates were formed from crustal carbonate melts, which were generated by the melting/fluxing of crustal carbonate materials, caused by the emplacement‐related processes of alkaline A‐type granitic rocks. Compared to typical mantle‐derived carbonatites associated with silica‐undersaturated, strongly peralkaline systems, the relatively small size and geochemical characteristics of the Ulsan carbonates reflect carbonatite genesis in a silica‐saturated, weakly alkali intrusive system. Major deep‐seated tectonic fractures formed by the collapse of the cauldron or the rift system associated with the opening of the East Sea (Japan Sea) might have facilitated the ascent of the crustal carbonate melts.     

Tectonic controls on metamorphism, partial melting, and intrusion: timing and duration of regional metamorphism and magmatism in the Ni de Massif, Turkey

Mafic high-pressure granulite, eclogite and pyroxenite xenoliths have been collected from a Mesozoic volcaniclastic diatreme in Xinyang, near south margin of the Sino-Korean Craton (SKC). The high-pressure granulite xenoliths are mainly composed of fine-grained granoblasts of Grt+Cpx+Pl+Hbl±Kfs±Q±Ilm with relict porphyritic mineral assemblage of Grt+Cpx±Pl±Rt. P–T estimation indicates that the granoblastic assemblage crystallized at 765–890 °C and 1.25–1.59 GPa, corresponding to crustal depths of ca. 41–52 km with a geotherm of 75–80 mW/m². Calculated seismic velocities (V_p) of high-pressure granulites range from 7.04 to 7.56 km/s and densities (D) from 3.05 to 3.30 g/cm³. These high-pressure granulite xenoliths have different petrographic and geochemical features from the Archean mafic granulites. Elevated geotherm and petrographic evidence imply that the lithosphere of this craton was thermally disturbed in the Mesozoic prior to eruption of the host diatreme. These samples have sub-alkaline basaltic compositions, equivalent to olivine– and quartz–tholeiite. REE patterns are flat to variably LREE-enriched (La_N/Yb_N=0.98–9.47) without Eu anomaly (Eu/Eu*=0.95–1.11). They possess 48–127 ppm Ni and 2–20 ppm Nb with Nb/U and La/Nb ratios of 13–54 and 0.93–4.75, respectively, suggesting that these high-pressure granulites may be products of mantle-derived magma underplated and contaminated at the base of the lower crust. This study also implies that up to 10 km Mesozoic lowermost crust was delaminated prior to eruption of the Cenozoic basalts on the craton.     

Geomechanical model for the post-Variscan evolution of the Permocarboniferous–Mesozoic basins in Northeast Germany

The Permocarboniferous basins in Northeast Germany formed on the heterogeneous and eroded parts of the Variscan orogene and its deformed northern foreland. Transtensional tectonic movements and thermal re-equilibration lead to medium-scale crustal fragmentation, fast subsidence rates and regional emplacement of large amounts of mostly acidic volcanics. The later basin formation and differentiation was triggered by reversals of the large-scale stress field and reactivation of prominent zones of weakness like the Elbe Fault System and the Rhenohercynian/Saxothuringian boundary that separate different Variscan basement domains in the area. The geomechanical behaviour of the latter plays an important role for the geodynamic evolution of the medium to large-scale structural units, which we can observe today in three dimensions on structural maps, geophysical recordings and digital models. This study concentrates on an area that comprises the southern Northeast German Basin, the Saale Basin, the Flechtingen High, the Harz Mountains High and the Subhercynian Basin. The presented data include re-evaluations of special geological and structural maps, the most recent interpretation of the DEKORP BASIN 9601 seismic profile and observations of exposed rock sections in Northeast Germany. On the basis of different structural inventories and different basement properties, we distinguish two structural units to the south and one structural unit to the north of the Elbe Fault System. For each unit, we propose a geomechanical model of basin formation and basin inversion, and show that the Rhenohercynian Fold and Thrust Belt domain is deformed in a thin-skinned manner, while the Mid-German Crystalline Rise Domain, which is the western part of the Saxothuringian Zone, rather shows a thick-skinned deformation pattern. The geomechanical model for the unit north to the Elbe Fault System takes account to the fact that the base of the Zechstein beneath the present Northeast German basin shows hardly any evidence for brittle deformation, which indicates a relative stable basement. Our geomechanical model suggests that the Permocarboniferous deposits may have contributed to the structural stiffness by covering small to medium scale structures of the upper parts of the brittle basement. It is further suggested that the pre-Zechstein successions underneath the present Northeast German basin were possibly strengthening during the Cretaceous basin inversion, which resulted in stress transfer to the long-lived master faults, as indicated for example by the shape of the salt domes in the vicinity of the latter faults. Contrary to this, post-Zechstein successions deformed in a different and rather complex way that was strongly biased by intensive salt tectonic movements.     

强震造成的活动地块地壳形变差异探讨

20 0 1年 11月 14日发生在昆仑山口西的 8 1级地震 ,在地表产生了长度大于 35 0km的破裂带 ,最大水平位移 6m左右 ,为左旋走滑断层。在昆仑山口西 8 1级地震周围不同活动地块内不同构造部位布设的GPS基准站对地震的响应存在明显的差异。其中位于柴达木活动地块内部的德令哈基准站在地震的当天观测到 7 5mm的同震位移 ,位于川滇活动地块西南边界带的下关基准站在震后 3d发生了 6 8mm以上的明显位移 ,而位于同一地块内部的昆明基准站和位于祁连山活动地块内的西宁基准站、位于拉萨活动地块内的拉萨基准站震时和震后都没有产生明显的位移。GPS基准站的观测资料表明 ,强震所处的活动地块和其相邻活动地块对强震有明显的响应 ,如果相隔一活动地块 ,则受强震的影响较小 ;在活动地块内 ,活动强烈的边界带或其它活动较强的部位对强震引起的地壳形变的响应明显大于活动强度较弱的部位 ;强震对相邻活动地块影响的差异 ,主要与强震所处活动地块运动时对其产生的作用方式的差异有关     

Distribution of vertical crustal movement rates in the Tohoku district, Japan, predicted by least-squares collocation

Least-squares prediction using an empirically deduced local covariance function was performed to investigate the temporal change in the rates of vertical crustal movements in the Tohoku district, Japan. Levelling data covering an area of approximately 450 × 275 km² observed between 1966 and 1995 were used and the results shown in the form of contour maps. Firstly we derived a covariance function of the rates of vertical crustal movement with a Gaussian form function. We used this function to estimate the spatial distribution of the rates of vertical crustal movements. By the present method, a steady tilt of the Tohoku district to the east, toward the Japan Trench and an areal uplift in the southwestern part were well reproduced. Moreover, a significant temporal change in vertical movement rates is clearly seen. Received: 15 July 1996      

The crustal fluid evolution and the causes of earthquakes(Ⅲ)

Ｔｈｅｃｒｕｓｔａｌｆｌｕｉｄｅｖｏｌｕｔｉｏｎａｎｄｔｈｅｃａｕｓｅｓｏｆｅａｒｔｈｑｕａｋｅｓ（Ⅲ）ＣＨＡＮＧ－ＦＡＮＧＸＵ（徐常芳）ＩｎｓｔｉｔｕｔｅｏｆＧｅｏｌｏｇｙ，ＳｔａｔｅＳｅｉｓｍｏｌｏｇｉｃａｌＢｕｒｅａｕ，Ｂｅｉｊｉｎｇ１０００...     

Study on the Gravity Field and Deep-Seated Crustal Structure at the North Margin of the Qinghai-Tibet Plateau

1.I~ductionThenorthernmarginoftheQinghai-TibetplateauincludestheAltllnMis.,theQilianMis.,KunlunMis.,theQaidambasinandthesouthernTarimbasin.ThisareaistCctonicallycharacterizedbyintensiveCenozoicdeformationwithcomplicateddeformationalmechedsm(Molnaretal.,1987;Zheng,1991;Culetal.,1994;Ding,1995andXuetal.,1996).Thedeformationalmechanismsincludethrust-napping,strike-slipping,extensionandblockrotation,aswellassimultaneousupliftingandtypicalbasin-rangetectonics(CulandXu,1996).IntermsofCenozoi…     

P-SH conversions in a flat-layered medium with anisotropy of arbitrary orientation

P-SH conversion is commonly observed in teleseismic P waves, and is often attributed to dipping interfaces beneath the receiver. Our modelling suggests an alternative explanation in terms of flat-layered anisotropy. We use reflectivity techniques to compute three-component synthetic seismograms in a 1-D anisotropic layered medium. For each layer of the medium, we prescribe values of seismic velocities and hexagonally symmetric anisotropy about a common symmetry axis of arbitrary orientation. A compressional wave in an anisotropic velocity structure suffers conversion to both SV -and SH -polarized shear waves, unless the axis of symmetry is everywhere vertical or the wave travels parallel to all symmetry axes. The P-SV conversion forms the basis of the widely used 'receiver function' technique. The P-SH conversion occurs at interfaces where one or both layers are anisotropic. A tilted axis of symmetry and a dipping interface in isotropic media produce similar amplitudes of both direct ( P ) and converted ( Ps ) phases, leaving the backazimuth variation of the P-Ps delay as the main discriminant. Seismic anisotropy with a tilted symmetry axis leads to complex synthetic seismograms in velocity models composed of just a few flat homogeneous layers. It is possible therefore to model observations of P coda with prominent transverse components with relatively simple 1-D velocity structures. Successful retrieval of salient model characteristics appears possible using multiple realizations of a genetic-algorithm (GA) inversion of P coda from several backazimuths. Using GA inversion, we determine that six P coda recorded at station ARU in central Russia are consistent with models that possess strong (> 10 per cent) anisotropy in the top 5 km and between 30 and 43 km depth. The symmetry axes are tilted, and appear aligned with the seismic anisotropy orientation in the mantle under ARU suggested by SKS splitting.