Five-Stage Model of the Palaeozoic Crustal Evolution in Xinjiang

The great majority of the Palaeozoic orogenjc belts of Central Asia are of the intercontinental type, whose evolution always follows a five-stage model, i.e. the basal continental crust-extensional transitional crust-oceanic crust-convergent transitional crust-new continental crust model. The stage for the extensional transitional crust is a pretty long, independent and inevitable phase. The dismembering mechanism of the basal continental crust becoming an extensional continental crust is delineated by the simple shear model put forward by Wernike (1981). The continental margins on the sides of a gently dipping detachment zone and moving along it are asymmetric: one side is of the nonmagmatic type and the other of the magmatic type with a typical bimodal volcanic formation. In the latter case, however, they were often confused with island arcs. This paper discusses the five-stage process of the crustal evolution of some typical orogenic belts in Xinjiang.     

东天山大型韧性剪切带基本特征与金矿预测

东天山大型韧性剪切带即秋格明塔什-黄山韧性剪切带,规模宏大,东西长逾600km,宽5～20km。变形标志明显,分四期变形。应变测量、岩组分析、剪切位移量计算、同位素测年等定量分析表明：①以平面单剪应变为主,稍晚向伸长应变转化;②存在逆冲剪切和脆-韧性变形转换;③剪切位移量在75km以上;④变形时代在300～250Ma之间,高峰期在285～265Ma,属海西中晚期。它是康-黄断裂带的重要组成体,控制着康古尔塔格金矿带的空间展布。据现有大中型金矿研究建立了区域脆-韧性变形转换带结构模式和金矿预测模式,可有效指导找矿勘探。     

地壳平均丰度最小值法——成矿省成矿元素区域背景值的简易计算方法

本文在Ａｇｔｅｒｂｅｒｇ和Ｄｉｖｉ（１９７８）的地壳丰度地质统计模型（ＣｒｕｓｔａｌＡｂｕｎｄａｎｃｅＧｅｏｓｔａｓｔｉｃｓ,简称ＣＡＧ）的基础上,提出了一种成矿省成矿元素区域背景值下限的简易计算方法。在区域背景值未知的情况下,根据成矿省某成矿元素的截切品位和金属量,可由此法计算出其地壳平均丰度最小值,以此作为成矿省中该元素区域背景值。将这一方法运用于华南Ｓｂ成矿省所得Ｓｂ元素区域背景值与通过区域地球化学方法得到的华南地区Ｓｂ的地壳平均丰度值相近,这充分说明这种地壳平均丰度最小值法的可靠性。     

龙门山彭灌杂岩体中梭坡店断裂带显微构造及变形环境分析

对龙门山中段彭灌杂岩体中的一条韧性剪切带进行了确定和命名,并着重从显微组构及岩组学方面对其变形环境进行了讨论,推断其形成深度为１０ｋｍ、温度为５００℃、压力为５００ＭＰａ,形成时的差异应力值为８０～１１０ＭＰａ,应变速率为１０－１１～１０－１０ｍ／ｓ。     

断裂构造控矿的数学和力学分析：以山东新城——河西金矿区为例

以山东新城－河西金矿区为例,通过新城、河西和候西矿床容矿断裂的形态、断裂活动、构造因素、构造应力场和变形场的数学、力学半定量及定量分析,探计断裂构造控矿规律以及成矿的力学机理。提出了金矿成矿受主断裂面形态、次级小断裂、节理的发育强度,断裂构造的力学特征、变形强度等控制。矿体多位于波状起伏的主断裂面凸峰的下盘、凹谷的上盘。矿化强度与次级断裂、节理的发育强度正相关。断裂构造带和次级构造裂隙带是内应力低     

Analysis of Error Caused by Replacing Spherical Shell with an Elastic Plate Model in Studying Bending Deformation of the Lithosphere

ＩＮＴＲＯＤＵＣＴＩＯＮＶｅｎｉｎｇＭｅｉｎｅｓｚ（１９４１）ｕｓｅｄｅａｒｌｉｅｒａｎａｐｐｒｏｘｉｍａｔｅｓｏｌｕ－ｔｉｏｎｆｏｒｔｈｅｅｑｕａｔｉｏｎｏｆｂｅｎｄｉｎｇｏｆｅｌａｓｔｉｃｔｈｉｎｐｌａｔｅｓｔｏｃａｌｃｕ－ｌａｔｅｔｈｅｖａｒｉ...     

GPS技术在金川露天矿边坡变形监测中的应用

本文结合金川露天矿边坡变形GPS监测研究,主要论述监测基点的选择,基点WGS-84坐标的确定,变形监测网的布设,GPS数据采集、处理和质量,坐标转换的实施等,给出反演推出的若干四等三角点及其它控制点的变形数据,这些数据和造成变形的物理成因符合得很好,最后概括出GPS技术应用于变形观测的若干优点。     

Mantle heat flow and geotherms for major tectonic units in central Europe

The results of seismic measurements along the deep seismic sounding profile VII and terrestrial heat flow measurements used for construction of heat generation models for the crust in the Paleozoic Platform region, the Sudetic Mountains (Variscan Internides) and the European Precambrian Platform show considerable differences in mantle heat flow and temperatures. At the base of the crust variations from 440–510°C in the models of Precambrian Platform to 700–820°C for the Paleozoic Platform and the Variscan Internides (Sudets) are found. These differences are associated with considerable mantle heat flow variations.The calculated models show mantle heat flow of about 8.4–12.6 mW m^–2 for the Precambrian Platform and 31 mW m^–2 to 40.2 mW m^–2 for Paleozoic orogenic areas. The heat flow contribution originating from crustal radioactivity is almost the same for the different tectonic units (from 33.5 mW m^–2 to 37.6 mW m^–2). Considerable physical differences in the lower crust and upper mantle between the Precambrian Platform and the adjacent areas, produced by lateral temperature variations, could be expected. On the basis of carbon ratio data it can be concluded that the Carboniferous paleogeothermal gradient was much lower in the Precambrian Platform area than in the Paleozoic Platform region.     

UPPER CRUSTAL VELOCITY STRUCTURE AND CONSTRAINING FAULT INTERPRETATION FROM SHUNYI-TANGGU REFRACTION EXPERIMENT DATA

The urban active fault survey is of great significance to improve the development and utilization of urban underground space, the urban resilience, the regional seismic reference modeling, and the natural hazard prevention. The Beijing-Tianjin metropolitan region with the densest population is one of the most developed and most important urban groups, located at the northeastern North China plain. There are several fault systems crossing and converging in this region, and most of the faults are buried. The tectonic setting of the faults is complex from shallow to deep. There are frequent historical earthquakes in this area, which results in higher earthquake risk and geological hazards. There are two seismicity active belts in this area. One is the NE directed earthquake belt located at the east part of the profile in northern Ninghai near the Tangshan earthquake region. The other is located in the Beijing plain in the northwest of the profile and near the southern end of Yanshan fold belt, where the 1679 M8.0 Sanhe-Pinggu earthquake occurred, the largest historical earthquake of this area. Besides, there are some small earthquake activities related to the Xiadian Fault and the Cangdong Fault at the central part of the profile.
The seismic refraction experiment is an efficient approach for urban active fault survey, especially in large- and medium-size cities. This method was widely applied to the urban hazard assessment of Los Angeles. We applied a regularized tomography method to modeling the upper crustal velocity structure from the high-resolution seismic refraction profile data which is across the Beijing-Tianjin metropolitan region. This seismic refraction profile, with 185km in length, 18 chemical explosive shots and 500m observation space, is the profile with densest seismic acquisition in the Beijing-Tianjin metropolitan region up to now. We used the trial-error method to optimize the starting velocity model for the first-arrival traveltime inversion. The multiple scale checker board tests were applied to the tomographic result assessment, which is a non-linear method to quantitatively estimate the inversion results. The resolution of the tomographic model is 2km to 4km through the ray-path coverage when the threshold value is 0.5 and is 4km to 7km through the ray-path coverage when the threshold value is 0.7. The tomographic model reveals a very thick sediment cover on the crystalline basement beneath the Beijing-Tianjin metropolitan region. The P wave velocity of near surface is 1.6km/s. The thickest sediment cover area locates in the Huanghua sag and the Wuqing sag with a thickness of 8km, and the thinnest area is located at the Beijing sag with a thickness of 2km. The thickness of the sediment cover is 4km and 5km in the Cangxian uplift and the Dacang sag, respectively. The depth of crystalline basement and the tectonic features of the geological subunits are related to the extension and rift movement since the Cenozoic, which is the dynamics of formation of the giant basins.
It is difficult to identify a buried fault system, for a tomographic regularization process includes velocity smoothing, and limited by the seismic reflection imaging method, it is more difficult to image the steep fault. Velocity and seismic phase variations usually provide important references that describe the geometry of the faults where there are velocity differences between the two sides of fault. In this paper, we analyzed the structural features of the faults with big velocity difference between the two sides of the fault system using the velocity difference revealed by tomography and the lateral seismic variations in seismograms, and constrained the geometry of the major faults in the study region from near surface to upper crust. Both the Baodi Fault and the Xiadian Fault are very steep with clear velocity difference between their two sides. The seismic refraction phases and the tomographic model indicate that they both cut the crystalline basement and extend to 12km deep. The Baodi Fault is the boundary between the Dachang sag and the Wuqing sag. The Xiadian Fault is a listric fault and a boundary between the Tongxian uplift and the Dachang sag. The tomographic model and the earthquake locations show that the near-vertical Shunyi-Liangxiang Fault, with a certain amount of velocity difference between its two sides, cuts the crystalline basement, and the seismicity on the fault is frequent since Cenozoic. The Shunyi-Liangxiang Fault can be identified deep to 20km according to the seismicity hypocenters.
The dense acquisition seismic refraction is a good approach to construct velocity model of the upper crust and helpful to identify the buried faults where there are velocity differences between their two sides. Our results show that the seismic refraction survey is a useful implement which provides comprehensive references for imaging the fault geometry in urban active fault survey.     

江西省旱涝动态监测指标的设计

从地面水份平衡原理出发,在分析地面降水承载力和地面水份含量变化特征的基础上,讨论了湿润地区旱涝灾害的形成机制。运用WMO推荐的异常度指标和Bhalme－Mooley湿润度指标的基本原理,设计了一个洪涝灾害的动态监测指标。通过对地面水份含量变化特征方程的简化处理,设计了一个干旱动态监测指标。在实际业务工作中,这一旱涝动态监测指标能较好地反映旱涝灾害的发生、发展和解除过程。