江西宜丰同安花岗细晶岩年代学及其成因研究

燕山期甘坊复式岩体是宜丰锂铌钽稀有金属矿田重要的赋矿岩体,细晶岩作为甘坊岩体晚阶段岩浆演化的产物,与区内细晶岩型稀有金属成矿作用关系密切,但前人对该类岩石及其成矿作用特征研究较薄弱。本文以甘坊岩体南侧同安矿区内的花岗细晶岩为研究对象,对其展开系统的岩相学、锡石U-Pb年代学和全岩地球化学分析。锡石U-Pb定年结果表明,同安花岗细晶岩形成时代为138.3 Ma。全岩地球化学分析结果显示,该类岩石具高磷铝、富碱钙、贫镁铁钛的特征,且A/CNK值(1.71～1.88)较高,σ值(1.40～1.72)较低,属于典型的强过铝质、高钾钙碱性岩石。全岩微量及稀土元素成分显示,同安花岗细晶岩具有稀土元素强烈亏损,相对富集Rb、U、Nb、Ta、Pb、P、Hf和明显亏损Ba、Th、Sr、Ti等元素的特征。综上所述,同安花岗细晶岩属高分异的S型花岗岩,来源于地壳浅部变沉积岩物质的部分熔融。在演化过程中,经历过早期高度结晶分异过程和晚期的岩浆-热液相互作用,其中早期的高度结晶分异过程对Li成矿起到了初始富集的作用,而演化晚期的岩浆-热液相互作用才是Li元素高度富集并成矿的关键。     

多期构造变形事件对吉林南部大横路Cu- Co矿床富集成矿的制约

钴矿是重要的战略性金属矿产资源之一,对其成矿作用(如构造与成矿的关系)进行深入的研究能为前期指导找矿提供理论依据。本文对中国东部吉林白山市三道沟镇三岔河村大横路Cu-Co矿开展了相关工作,包括野外构造解析、钻孔-岩芯资料分析、钻孔薄片综合矿物分析系统(TIMA)实验和区域相关岩石年代学等。构造解析显示大横路Cu-Co矿围岩变形包括层片交切、S₁面理和褶劈理等构造要素。钻孔-岩芯资料分析矿区发育大量F₂紧闭褶皱、逆冲断层及断层相关褶皱、倒转褶皱F₂等。钻孔、探槽薄片样品TIMA实验显示含Co流体大量富集于低角度逆冲断裂、倒转褶皱韧性剪切域和断层相关褶皱转折端处。这些工作显示走向为NE的低角度逆冲断裂及断层相关褶皱对大横路Cu-Co矿的富集起到关键的控制作用。相关年代学工作,结合前人研究及大量区域地质资料表明:(1)矿区内逆冲断层及褶皱等控矿构造要素为古元古代构造事件的产物;(2)中生代构造事件对成矿作用的制约(Cu-Co矿的再富集)可能来自于白垩纪大规模的伸展作用。     

Distribution of Palaeozoic tectonic superimposed unconformities in the Tarim Basin,NW China: significance for the evolution of palaeogeomorphology and sedimentary response

Seismic and drilling well data were used to examine the occurrence of multiple stratigraphic unconformities in the Tarim Basin, NW China. The Early Cambrian, the Late Ordovician and the late Middle Devonian unconformities constitute three important tectonic sequence boundaries within the Palaeozoic succession. In the Tazhong, Tabei, Tadong uplifts and the southwestern Tarim palaeo‐uplift, unconformities obviously belong to superimposed unconformities. A superimposed unconformity is formed by superimposition of unconformities of multiple periods. Areas where superimposed unconformities develop are shown as composite belts of multiple tectonic unconformities, and as higher uplift areas of palaeo‐uplifts in palaeogeomorphologic units. The contact relationship of unconformities in the lower uplift areas is indicative of truncation‐overlap. A slope belt is located below the uplift areas, and the main and secondary unconformities are characterized by local onlap reflection on seismic profiles. The regional dynamics controlled the palaeotectonic setting of the Palaeozoic rocks in the Tarim Basin and the origin and evolution of the basin constrained deposition. From the Sinian to the Cambrian, the Tarim landmass and its surrounding areas belonged to an extensional tectonic setting. Since the Late Ordovician, the neighbouring north Kunlun Ocean and Altyn Ocean was transformed from a spreading ocean basin to a closed compressional setting. The maximum compression was attained in the Late Ordovician. The formation of a tectonic palaeogeomorphologic evolution succession from a cratonic margin aulacogen depression to a peripheral foreland basin in the Early Caledonian cycle controlled the deposition of platform, platform margin, and deep‐water basin. Tectonic uplift during the Late Ordovician resulted in a shallower basin which was followed by substantial erosion. Subsequently, a cratonic depression and peripheral or back‐arc foreland basin began their development in the Silurian to Early–Middle Devonian interval. In this period, the Tabei Uplift, the Northern Depression and the southern Tarim palaeo‐uplift showed obvious control on depositional systems, including onshore slope, shelf and deep‐water basin. The southern Tarim Plate was in a continuous continental compressional setting after collision, whereas the southern Tianshan Ocean began to close in the Early Ordovician and was completely closed by the Middle Devonian. At the same time, further compression from peripheral tectonic units in the eastern and southern parts of the Tarim Basin led to the expansion of palaeo‐uplift in the Late Devonian–Early Carboniferous interval, and the connection of the Tabei Uplift and Tadong Uplift, thus controlling onshore, fluvial delta, clastic coast, lagoon‐bay and shallow marine deposition. Copyright © 2015 John Wiley & Sons, Ltd.     

地球深部包体与成矿关系——一个有意义的研究方向

结合在实际工作中的体会,提出和讨论了“地球深部包体与成矿关系”这一有意义的研究方向及其先导性科学问题。地球深部包体中镍、金、钼、钨等成矿元素的含量是不均一的,镍和金在地幔岩包体中含量最高,钼在玄武岩及镁铁质麻粒岩包体中最高,而钨在长英质麻粒岩和花岗岩类包体中含量最高。这些反映岩石圈和软流圈以及岩石圈的不同层次中镍、金、钼、钨等成矿元素的含量不均一,分别提供了地壳中镍、金、钼、钨矿床的初始物质来源。这一认识可能给镍、金、钼、钨等金属矿床和矿床集中区的战略预测提供一些新思路。     

Classification of Complex Reservoirs in Superimposed Basins of Western China

<正>Many of the sedimentary basins in western China were formed through the superposition and compounding of at least two previously developed sedimentary basins and in general they can be termed as complex superimposed basins.The distinct differences between these basins and monotype basins are their discontinuous stratigraphic sedimentation,stratigraphic structure and stratigraphic stress-strain action over geological history.Based on the correlation of chronological age on structural sections,superimposed basins can be divided into five types in this study:(1) continuous sedimentation type superimposed basins,(2) middle and late stratigraphic superimposed basins,(3) early and late stratigraphic superimposed basins,(4) early and middle stratigraphic superimposed basins,and(5) long-term exposed superimposed basins.Multiple source-reservoir-caprock assemblages have developed in such basins.In addition,multi-stage hydrocarbon generation and expulsion,multiple sources,polycyclic hydrocarbon accumulation and multiple-type hydrocarbon reservoirs adjustment,reformation and destruction have occurred in these basins.The complex reservoirs that have been discovered widely in the superimposed basins to date have remarkably different geologic features from primary reservoirs,and the root causes of this are folding,denudation and the fracture effect caused by multiphase tectonic events in the superimposed basins as well as associated seepage,diffusion,spilling,oxidation,degradation and cracking.Based on their genesis characteristics,complex reservoirs are divided into five categories:(1) primary reservoirs,(2) trap adjustment type reservoirs,(3) component variant reservoirs,(4) phase conversion type reservoirs and (5) scale-reformed reservoirs.     

山东金青顶金矿床控矿构造特征及深部预测

金青顶金矿床位于山东牟平-乳山金矿带将军石-曲河庄断裂的南端,矿床围岩为昆嵛山花岗岩,属含金石英脉型金矿。本文通过矿床地质特征、围岩蚀变以及控矿构造特征等方面的研究,认为与成矿有关的构造活动至少划分为4期,基本控制着矿体的定位与分布。深部地球化学原生晕研究表明,矿体在垂向上具有明显的地球化学分带性,且在已知矿体下方出现近矿晕、前缘晕及尾晕特征指示元素构造叠加晕强度升高趋势。结合矿体在断裂中分布的规律以及原生晕特点,对金青顶矿床深部第二富集段进行了预测,推断在-1100m下有第二金富集段存在,且具有很大的经济价值。     

大通河盆地二叠系沉积相及铜矿化特征

大通河盆地为一上古生代—中新生代断陷盆地,沉积持续时间长,后期构造作用强烈。通过对盆地内二叠系沉积相及铜矿化特征分析,认为铜矿化物质来源于北祁连古陆核,经剥蚀—沉积形成了含铜二叠系陆相杂色砂岩,后期断裂构造及热液活动更加强化了铜矿化的作用。     

铜山口矿区狮子山岩体深部找矿前景探析

通过近年矿山采矿、探矿工程和深部物探工程所揭露的地质信息,结合区域地质和矿区地质构造,对矿区狮子山岩瘤及Ⅳ号矿体重新认识,进一步探讨狮子山岩瘤及Ⅳ号矿体深部找矿前景,从而指导矿山开采,并为矿山深部找矿提供理论依据。     

广西兴业县龙安高岭土矿床成矿地质特征、选矿试验及开采价值浅谈

广西兴业县龙安高岭土矿床产于大容山花岗岩体龙门单元补充侵入岩,成矿母岩为细粒斑状二长花岗岩。高岭土分布广,储量大,埋藏浅,易开采,矿物组分主要为高岭石和石英。高岭石为片状晶体,有序度高,粒度细,粒级分布理想,广泛用于陶瓷、造纸、橡胶、油漆及无线电电子元件、冶金、石油、原子能、建材等,具有巨大的经济开采价值及广阔的市场需求前景。     

中川岩体铀矿化富集条件及铀矿化成因分析

中川岩体位于中秦岭华力西褶皱系礼县—柞水冒地槽褶皱带西段中部,为同心环状产出的复式岩体。围绕岩体产有中川铀矿田和李坝、马泉、崖湾等金矿床。其中铀矿化类型有钠交代型、硅质脉型、粘土型、硅质脉—粘土叠加型,不同类型的铀矿化其富集条件也各异。矿化成因有两种,岩浆期后热液成因和下降水淋积成因。